<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The scheme of arrangement of grooves of partially regular microrelief of type II shifted by 0.5 angular pitch is considered. Such grooves are formed by vibration on end faces of rotary bodies. An analytical dependence was obtained to determine the relative area of a partially regular microrelief depending on the geometric parameters of V-shaped grooves. The parameters of the grooves of a partially regular microrelief formed at different distances from the center of rotation are determined, at which the value of the relative area of the partially regular microrelief formed on the treated surface will be stable.</p>
</abstract>

The scheme of arrangement of grooves of partially regular microrelief of type II shifted by 0.5 angular pitch is considered. Such grooves are formed by vibration on end faces of rotary bodies. An analytical dependence was obtained to determine the relative area of a partially regular microrelief depending on the geometric parameters of V-shaped grooves. The parameters of the grooves of a partially regular microrelief formed at different distances from the center of rotation are determined, at which the value of the relative area of the partially regular microrelief formed on the treated surface will be stable.

Ensuring a Stable Relative Area of Burnishing of Partially Regular Microrelief Formed on End Surfaces of Rotary Bodies

Ternopil Ivan Puluj National Technical University

Strojnícky časopis - Journal of Mechanical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The scheme of arrangement of grooves of partially regular microrelief of type II shifted by 0.5 angular pitch is considered. Such grooves are formed by...

Ensuring a Stable Relative Area of Burnishing of Partially Regular Microrelief Formed on End Surfaces of Rotary Bodies

Pubblicato online: 08 ott 2021

Pagine: 41 - 50

DOI: https://doi.org/10.2478/scjme-2021-0004

Parole chiave
grooves, partially regular microrelief, surface, burnishing speed, rotary bodies, vibration

© 2021 Dzyura Volodymyr et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Ensuring a Stable Relative Area of Burnishing of Partially Regular Microrelief Formed on End Surfaces of Rotary Bodies

Pubblicato online: 08 ott 2021

Pagine: 41 - 50

DOI: https://doi.org/10.2478/scjme-2021-0004

Parole chiavegrooves, partially regular microrelief, surface, burnishing speed, rotary bodies, vibration

© 2021 Dzyura Volodymyr et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Parole chiave
grooves, partially regular microrelief, surface, burnishing speed, rotary bodies, vibration