Strojnícky časopis - Journal of Mechanical Engineering

Strojnícky cas. J. of M En

<abstract><title style='display:none'>Abstract</title>The purpose of this technical note is to present a method of analysis of a joint made using a single row of bolts, typical of a bolts around the edge of a closure plat or a simple bracket. Classical analysis methods are applied to the joint subjected to combinations of both in-plane and out-of-plane loads and moments. An analysis of loads and stresses in a single bolt is developed. The note brings together a number of concepts and links them into a practical design analysis process that is applicable for many cases of joints made with a single bolt or a single line of bolts and are adequate to demonstrate the structural integrity of the joint. In some cases finite element methods may be more appropriate, and the methods discussed can be used in the validation process.</abstract>

Abstract

Michael A Welch (Consulting Engineers) Limited

Keywords

<article-title>Preloaded Bolted Joint Made with a Single Row of Fasteners</article-title>

Preloaded Bolted Joint Made with a Single Row of Fasteners

{"article-title":"Preloaded Bolted Joint Made with a Single Row of Fasteners"}

Strojnícky časopis - Journal of Mechanical Engineering is covered by the following services: <ul> <li> Baidu Scholar </li> <li> CNKI Scholar (China National Knowledge Infrastructure) </li> <li> CNPIEC - cnpLINKer </li> <li> Dimensions </li> <li> DOAJ (Directory of Open Access Journals) </li> <li> EBSCO </li> <li> Engineering Village </li> <li> ExLibris </li> <li> GoOA </li> <li> Google Scholar </li> <li> Inspec </li> <li> Japan Science and Technology Agency (JST) </li> <li> J-Gate </li> <li> JournalGuide </li> <li> JournalTOCs </li> <li> KESLI-NDSL (Korean National Discovery for Science Leaders) </li> <li> MyScienceWork </li> <li> Naver Academic </li> <li> Naviga (Softweco) </li> <li> QOAM (Quality Open Access Market) </li> <li> ReadCube </li> <li> SCILIT </li> <li> SCImago (SJR) </li> <li> SCOPUS </li> <li> Semantic Scholar </li> <li> TDNet </li> <li> TEMA Technik und Management </li> <li> Ulrich's Periodicals Directory/ulrichsweb </li> <li> WanFang Data </li> <li> WorldCat (OCLC) </li> <li> X-MOL </li> </ul>

Strojnícky časopis - Journal of Mechanical Engineering ist in den folgenden Services indiziert: <ul> <li> Baidu Scholar </li> <li> CNKI Scholar (China National Knowledge Infrastructure) </li> <li> CNPIEC - cnpLINKer </li> <li> Dimensions </li> <li> DOAJ (Directory of Open Access Journals) </li> <li> EBSCO </li> <li> Engineering Village </li> <li> ExLibris </li> <li> GoOA </li> <li> Google Scholar </li> <li> Inspec </li> <li> Japan Science and Technology Agency (JST) </li> <li> J-Gate </li> <li> JournalGuide </li> <li> JournalTOCs </li> <li> KESLI-NDSL (Korean National Discovery for Science Leaders) </li> <li> MyScienceWork </li> <li> Naver Academic </li> <li> Naviga (Softweco) </li> <li> QOAM (Quality Open Access Market) </li> <li> ReadCube </li> <li> SCILIT </li> <li> SCImago (SJR) </li> <li> SCOPUS </li> <li> Semantic Scholar </li> <li> TDNet </li> <li> TEMA Technik und Management </li> <li> Ulrich's Periodicals Directory/ulrichsweb </li> <li> WanFang Data </li> <li> WorldCat (OCLC) </li> <li> X-MOL </li> </ul>

<DIV align=left> The Strojnícky časopis – Journal of Mechanical Engineering publishesoriginal scientific and application oriented papers, dealing withproblems of modern technologies in the fields of mechanicalengineering including: <UL> <LI>structural and solid mechanics, </LI> <LI>fluid mechanics, </LI> <LI>mechatronics, </LI> <LI>multi-physical problems, </LI> <LI>biomedical engineering, </LI> <LI>advanced micro and nano materials, </LI> <LI>structural and machine design, </LI> <LI>virtual and rapid protyping, </LI> <LI>power and process engineering, </LI> <LI>strength of materials, creep, plasticity, </LI> <LI>fracture mechanics and fatigue, </LI> <LI>durability and reliability of engineering structures, </LI> <LI>production engineering, etc. </LI></UL> This considers the following activities in mechanical engineering andcross-linked branches as modelling, simulations, experiment,construction, testing, measuring, operation, production, environmentalaspects, quality, etc. The Strojnícky časopis – Journal of Mechanical Engineering publishesthe following types of papers: <UL> <LI>Regular Articles should describe original research of highquality or new application in the field of Mechanical Engineering. </LI> <LI>Review Articles will generally be specially commissioned,however, suggestions for topics and authors are welcomed by theEditor-in-Chief. </LI> <LI>Technical Notes provide rapid publication of important newcontributions. </LI></UL> Please see our Guide for Authors for information on articlesubmission. If you require any further information or help, please donot hesitate to contact us. The submitted papers are peer-reviewed and tested against plagiarism. The journal does not have article processing charges (APCs) norarticle submission charges. Archiving Sciendo archives the contents of this journal in <A href="https://www.portico.org/">Portico</A> - digital long-term preservation service of scholarly books, journals and collections. Plagiarism Policy The editorial board is participating in a growing community of <A href="https://www.crossref.org/services/similarity-check/">Similarity Check System's</A> users in order to ensure that the content published is original and trustworthy. Similarity Check is a medium that allows for comprehensive manuscripts screening, aimed to eliminate plagiarism and provide a high standard and quality peer-review process. </DIV>

Editor in Chief Branislav Hučko, SjF STU Bratislava, Slovakia Executive Editor Roland Jančo, SjF STU Bratislava, Slovakia Editorial Advisory Board Professor Eniko T. Enikov, College of Engineering, Aerospace&amp;Mechanical Engineering, The University of Arizona, USA Professor Siegfried Schmauder, Institute for Materials Testing, Materials Science and Strength of Materials (IMWF), University of Stuttgart, Germany Professor Daniel Inman, Department of Aerospace Engineering, University of Michigan, USA Professor Helder C. Rodrigues, The Mechanical Engineering Department, Instituto Superior Tecnico, Lisbon, Portugal Professor Thomas J.R. Hughes, Institute for Computational Engineering and Sciences (ICES) The University of Texas at Austin, Austin, Texas, USA Professor Justin Murin, Institute of Automotive Mechatronics, Faculty of Electrical Engineering and Information Technology, Slovak Univerity of Technology in Bratislava, Slovakia Professor Gábor Stépán, Department of Applied Mechanics, Budapest University of Technology and Economics (BME), Budapest, Hungary Professor Herbert Mang, Institute for Mechanics of Materials and Structures, Vienna University of Technology, Vienna, Austria Professor Petr Horyl, Department of Applied Mechanics, Faculty of Mechanical Engineering, VSB - Technical University of Ostrava, Ostrava, Czech Republic Professor Ulrich Gabbert, Institute of Mechanics, Chair of Computational Mechanics, Otto von Guericke University, Magdeburg, Germany Professor Marco Ceccarelli, LARM: Laboratory of Robotics and Mechatronics, DiCEM – University of Cassino and South Latium, Cassino, Italy – president of IFToMM Professor Evangelos J. Sapountzakis, National Technical University of Athens, School of Civil Engineering, Department of Structural Engineering, Institute of Structural Analysis and Antiseismic Research, Athens, Greece Professor Milan Rackov, University of Novi Sad, Faculty of TechnicalSciences, Department of Mechanization and Design Engineering, Chair ofMachine Elements, Machine and Mechanism and Mechanical Engineering inAgriculture, Novi Sad, Serbia Professor Dr.-Ing. Stefan Linsel, Hochschule Karlsruhe - Technik undWirtschaft - University of Applied Science, Faculty of Architectureand Construction Engineering, Director Construction Materials TestingCenter, Karlsruhe, Germany Professor Orest Kochan, Lviv Polytechnic National University,Department of Information - Measuring Technologies, Lviv, Ukraine Professor Stanislaw Legutko, Poznan University of Technology,Institute of Mechanical Technology, Poznan, Poland Professor Miroslav Píška, Brno University of Technology, Faculty ofMechanical Engineering, Institute of Manufacturing Technology, Brno,Czech Republic Professor Anatolii Ivanovich Pokhodun, D.I.Mendeleyev Institute forMetrology (State Research Center), Russia Professor Sergey V. Sorokin, Department of Materials and Production,Aalborg University, Denmark Professor Pavlo Maruschak, Ternopil Ivan Puluj Natoinal TechnicalUniversity, Ternopil, Ukraine Language Editor Ing. Michael ČEKAN, Faculty of mechanical Engineering STU in Bratislava, SLOVAKIA Technical Editor Roland JANČO, Faculty of Mechanical Engineering, Bratislava, Slovakia Contact <A href="mailto:roland.janco@stuba.sk">roland.janco@stuba.sk</A> Publisher De Gruyter Poland Bogumiła Zuga 32A Str. 01-811 Warsaw, Poland T: +48 22 701 50 15

Submit your manuscripts to the journal via email to: <A href="mailto:roland.janco@stuba.sk">roland.janco@stuba.sk</A> Open Access Statement The journal is an Open Access journal that allows a free unlimited access to all its contents without any restrictions upon publication to all users. <A href="https://sciendo-parsed-data-feed.s3.eu-central-1.amazonaws.com/SCJME/Open_Access_License.pdf">Open Access License</A> Article Processing Charge (APCs) The journal does not have article processing charges (APCs) nor article submission charges.

Strojnícky časopis - Journal of Mechanical Engineering

Preloaded Bolted Joint Made with a Single Row of Fasteners

Welch Michael
Welch Michael

Pubblicato online: 13 May 2020

Volume & Edizione: Volume 70 (2020) - Edizione 1 (April 2020)

Pagine: 143 - 146

Dettagli rivista e numero

Strojnícky časopis - Journal of Mechanical Engineering

Anteprima PDF

Riferimenti

Articoli recenti

Pianifica la tua conferenza remota con Sciendo

Strojnícky časopis - Journal of Mechanical Engineering

Preloaded Bolted Joint Made with a Single Row of Fasteners

Welch MichaelWelch Michael

Pubblicato online: 13 May 2020

Volume & Edizione: Volume 70 (2020) - Edizione 1 (April 2020)

Pagine: 143 - 146

Dettagli rivista e numero

Strojnícky časopis - Journal of Mechanical Engineering

Anteprima PDF

Riferimenti

Articoli recenti

Pianifica la tua conferenza remota con Sciendo

Welch Michael
Welch Michael