<abstract xmlns="http://www.w3.org/1999/xhtml"><p>ANSYS Q3D Extractor tool (AQ3DE), using the quasi-static solvers (method of moments, integral equations and FEMs), is very efficient for computing and simulating two- and three-dimensional electromagnetic field. This simulation is used to extract parameters of interest, such as: resistance (R), conductance (G), self-inductance (L), mutual inductance (M) and capacitance (C). These parameters can be further used to optimize and to obtain automatically the design of a wireless power transfer systems (WPTS). The resulting matrices allow the generation of new matrices for any selected parameters. To complete the analysis, the model which is computed will be exported as an equivalent circuit. In this paper, starting from a given WPTS, using AQ3DE tool, the parameters of interest (R, G, L, M, C) were automatically calculated, and the SPICE equivalent circuit was obtained. The analysis was performed for two different distances between the emitter and the receiver. The electrical circuit theory was used for the system analysis of magnetically coupled coil (MCC) system. Starting from the parameters extracted by the AQ3DE tool, the performance of the WPTS has been analysed both in time and frequency domain.</p></abstract>

ANSYS Q3D Extractor tool (AQ3DE), using the quasi-static solvers (method of moments, integral equations and FEMs), is very efficient for computing and simulating two- and three-dimensional electromagnetic field. This simulation is used to extract parameters of interest, such as: resistance (R), conductance (G), self-inductance (L), mutual inductance (M) and capacitance (C). These parameters can be further used to optimize and to obtain automatically the design of a wireless power transfer systems (WPTS). The resulting matrices allow the generation of new matrices for any selected parameters. To complete the analysis, the model which is computed will be exported as an equivalent circuit. In this paper, starting from a given WPTS, using AQ3DE tool, the parameters of interest (R, G, L, M, C) were automatically calculated, and the SPICE equivalent circuit was obtained. The analysis was performed for two different distances between the emitter and the receiver. The electrical circuit theory was used for the system analysis of magnetically coupled coil (MCC) system. Starting from the parameters extracted by the AQ3DE tool, the performance of the WPTS has been analysed both in time and frequency domain.

On Magnetically Coupled Coils Parameter Calculation

Electrical Engineering Faculty / Dept. of Electrical Engineering

The Scientific Bulletin of Electrical Engineering Faculty

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"On Magnetically Coupled Coils Parameter Calculation"}

ANSYS Q3D Extractor tool (AQ3DE), using the quasi-static solvers (method of moments, integral equations and FEMs), is very efficient for computing and...

On Magnetically Coupled Coils Parameter Calculation

Pubblicato online: 01 ott 2020

Pagine: 9 - 13

DOI: https://doi.org/10.2478/sbeef-2020-0102

Parole chiave
ANSYS DesignerSI, AC/DC analysis, SPICE, magnetically coupled coils, optimization, circuit simulation

© 2020 Lavinia Maria Bobaru et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

On Magnetically Coupled Coils Parameter Calculation

Pubblicato online: 01 ott 2020

Pagine: 9 - 13

DOI: https://doi.org/10.2478/sbeef-2020-0102

Parole chiaveANSYS DesignerSI, AC/DC analysis, SPICE, magnetically coupled coils, optimization, circuit simulation

© 2020 Lavinia Maria Bobaru et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Parole chiave
ANSYS DesignerSI, AC/DC analysis, SPICE, magnetically coupled coils, optimization, circuit simulation