[
[1] TASCÓN, A. 2017. Design of silos for dust explosions: Determination of vent area sizes and explosion pressures. Eng. Struct., 134:1 – 10.10.1016/j.engstruct.2016.12.016
]Search in Google Scholar
[
[2] ECKHOFF, R. K. 2009. Understanding dust explosions. the role of powder science and technology. J. Loss Prev. Process Ind., 22:105 – 116.10.1016/j.jlp.2008.07.006
]Search in Google Scholar
[
[3] ECKHOFF, R. K. and FUHRE, K. 1984. Dust explosion experiments in a vented 500 m3 silo cell. J. Occupat. Accidents, 6:229 – 240.10.1016/0376-6349(84)90012-9
]Search in Google Scholar
[
[4] YUAN, Z., KHAKZAD, N., KHAN, F. and AMYOTTE, P. 2015. Dust explosions: A threat to the process industries. Process Saf. Environ., 98:57–71.10.1016/j.psep.2015.06.008
]Search in Google Scholar
[
[5] LI, G., YANG, H.-X., YUAN, C.-M. and ECKHOFF, R. 2016. A catastrophic aluminium-alloy dust explosion in china. J. Loss Prev. Process Ind., 39:121 – 130.10.1016/j.jlp.2015.11.013
]Search in Google Scholar
[
[6] PROUST, C., ACCORSI, A. and DUPONT, L. 2007. Measuring the violence of dust explosions with the “20 l sphere” and with the standard “iso 1 m3 vessel”. Systematic comparison and analysis of the discrepancies. J. Loss Prev. Process Ind., 20:599 – 606.10.1016/j.jlp.2007.04.032
]Search in Google Scholar
[
[7] AJRASH, M. J., ZANGANEH, J. and B., M. 2016. Methane-coal dust hybrid fuel explosion properties in a large scale cylindrical explosion chamber. J. Loss Prev. Process Ind., 40:317 – 328.10.1016/j.jlp.2016.01.009
]Search in Google Scholar
[
[8] SCHEID, M., KUSCHE, C., SCHRDER, V. and BARTH, U. 2013. Tests on suitability of the ignition source “exploding wire” for the determination of explosion characteristics of combustible dusts in the 20-l-sphere. Chemical Engineering Transactions, 31:703 – 708.
]Search in Google Scholar
[
[9] TASCÓN, A., RUIZ, A. and AGUADO, P. 2011. Dust explosions in vented silos: Simulations and comparisons with current standards. Powder Technol., 208:717 – 724.10.1016/j.powtec.2011.01.015
]Search in Google Scholar
[
[10] TASCÓN, A., RAMÍREZ-GOMEZ, A. and AGUADO, P. 2016. Dust explosions in an experimental test silo: Influence of length/diameter ratio on vent area sizes. Biosyst. Eng., 148:18 – 33.10.1016/j.biosystemseng.2016.04.014
]Search in Google Scholar
[
[11] ZHANG, Q. and ZHANG, B. 2015. Effect of ignition delay on explosion parametres of corn dust/air in confined chamber. J.Loss Prev. Process Ind., 33:23 – 28.10.1016/j.jlp.2014.11.009
]Search in Google Scholar
[
[12] CASHDOLLAR, K. and ZLOCHOWER, I. 2007. Explosion temperatures and pressures of metals and other elemental dust clouds. J. Loss Prev. Process Ind., 20:337 – 348.10.1016/j.jlp.2007.04.018
]Search in Google Scholar
[
[13] SERAFIN, J., BEBCAK, A., BERNATIK, A., LEPIK, P., MYNARZ, M. and PITT, M. 2012. The influence of air flow on maximum explosion characteristics of dust-air mixtures. J. Loss Prev. Process Ind., 26:209 – 214.10.1016/j.jlp.2012.11.002
]Search in Google Scholar
[
[14] BENEDETTO, A., GARCIA-AGREDA, A., RUSSO, P. and SANCHIRICO, R. 2012. Combined effect of ignition energy and initial turbulence on the explosion behavior of lean gas/dust-air mixtures. Ind. Eng. Chem. Res., 51:7663 – 7670.10.1021/ie201664a
]Search in Google Scholar
[
[15] van der WEL, P. G. J. 1993. Ignition and propagation of dust explosions. dissertation, Technische Universiteit Delft, Delft.
]Search in Google Scholar
[
[16] DAHOE, A. E., CANT, R. S. and SCARLETT, B. 2002. On the decay of turbulence in the 20-liter explosion sphere. Flow Turbul. Combust., 67:159 – 184.10.1023/A:1015099110942
]Search in Google Scholar
[
[17] EN 14034-3+A1:2011-08 (2011). En 14034-3+a1:2011-08. determination of explosion characteristics of dust clouds. part 3: Determination of the lower explosion limit LEL of dust clouds.
]Search in Google Scholar
[
[18] KURACINA, R., PASTIER, M., BALOG, K. and TUREKOVÁ, I. 2013. Design of chemical igniter for chamber KV 150-M2. In Bezpečnost a ochrana zdraví při práci (Occupational Health and Safety), pages 59 – 61, Ostrava: SPBI.
]Search in Google Scholar
e 