<abstract xmlns="http://www.w3.org/1999/xhtml">Intensified investment processes in construction have resulted in increased interest in the methods of efficient detection, verification and location of underground utility networks. In addition to the well-known pipe and cable locating equipment, which has increased its efficiency and reliability through the development of technologies, GPRs are becoming more and more popular.This publication presents the results of the experimental research carried out with the use of GPRs manufactured by two different companies as well as the results of the verification of underground utilities in real conditions. The GPRs have worked in the mode of the real-time location of their own position using the GNSS system or robotic total stations.The GPR (Ground Penetrating Radar) surveys performed on a test field, consisting of 9 pipes with a known position, were aimed at assessing the accuracy of their identification on echograms. The utility line location errors were determined using three different combinations between the GPR and the locating instrument. It allowed the evaluation of the possibility of using these solutions for detection, verification and location of underground utility networks in the light of the Polish legal regulations and the British specification PAS 128.The verification in real conditions was carried out in a typical urban space, characterised by an intense occurrence of underground utilities, that is, sewage systems, gas pipelines and power cables. It was based on the GESUT database captured from the county geodetic and cartographic documentation centre. The results of the visual analysis of the materials captured with the help of two measurement systems were described in detail, however, the verification was carried out only for one set of data. The authors have presented the procedure of processing echograms and detecting the location of pipeline axes based on their vectorisation. The authors of this research paper have performed a numerical analysis of the compliance of the profiles of utility lines with the information from the base map for two variants of the GPR data integration with the coordinates. The authors of this research paper have also presented an alternative concept of capturing the profile of a utility line in the field based on the processing of GPR data in 3D – the so-called C-scan. The conclusions summarise the possible factors affecting the surveying results and the methods of eliminating sources of errors, both for the GPR and geodetic data.</abstract>

Intensified investment processes in construction have resulted in increased interest in the methods of efficient detection, verification and location of underground utility networks. In addition to the well-known pipe and cable locating equipment, which has increased its efficiency and reliability through the development of technologies, GPRs are becoming more and more popular.This publication presents the results of the experimental research carried out with the use of GPRs manufactured by two different companies as well as the results of the verification of underground utilities in real conditions. The GPRs have worked in the mode of the real-time location of their own position using the GNSS system or robotic total stations.The GPR (Ground Penetrating Radar) surveys performed on a test field, consisting of 9 pipes with a known position, were aimed at assessing the accuracy of their identification on echograms. The utility line location errors were determined using three different combinations between the GPR and the locating instrument. It allowed the evaluation of the possibility of using these solutions for detection, verification and location of underground utility networks in the light of the Polish legal regulations and the British specification PAS 128.The verification in real conditions was carried out in a typical urban space, characterised by an intense occurrence of underground utilities, that is, sewage systems, gas pipelines and power cables. It was based on the GESUT database captured from the county geodetic and cartographic documentation centre. The results of the visual analysis of the materials captured with the help of two measurement systems were described in detail, however, the verification was carried out only for one set of data. The authors have presented the procedure of processing echograms and detecting the location of pipeline axes based on their vectorisation. The authors of this research paper have performed a numerical analysis of the compliance of the profiles of utility lines with the information from the base map for two variants of the GPR data integration with the coordinates. The authors of this research paper have also presented an alternative concept of capturing the profile of a utility line in the field based on the processing of GPR data in 3D – the so-called C-scan. The conclusions summarise the possible factors affecting the surveying results and the methods of eliminating sources of errors, both for the GPR and geodetic data.

GPR surveying method as a tool for geodetic verification of GESUT database of utilities in the light of BSI PAS128

Reports on Geodesy and Geoinformatics

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Intensified investment processes in construction have resulted in increased interest in the methods of efficient detection, verification and location of...

GPR surveying method as a tool for geodetic verification of GESUT database of utilities in the light of BSI PAS128

Article Category: Original Article

Pubblicato online: 25 giu 2019

Pagine: 49 - 59

Ricevuto: 16 apr 2019

Accettato: 03 giu 2019

DOI: https://doi.org/10.2478/rgg-2019-0006

© 2019 Marta Gabryś, Katarzyna Kryszyn, Łukasz Ortyl, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.