<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The oscillating buoy wave energy converter (OBWEC) captures wave energy through the undulating movement of the buoy in the waves. In the process of capturing wave energy, the hydrodynamic performance of the buoy plays an important role. This paper designed the “Haida No. 1” OBWEC, in which the buoy adopts a form of swinging motion. In order to further improve the hydrodynamic performance of the buoy, a 2D numerical wave tank (NWT) model is established using ADINA software based on the working principle of the device. According to the motion equation of the buoy in the waves, the influence of the buoy shape, arm length, tilt angle, buoy draft, buoy width, wave height and Power Take-off (PTO) damping on the hydrodynamic performance of the buoy is studied. Finally, a series of physical experiments are performed on the device in a laboratory pool. The experimental results verify the consistency of the numerical results. The research results indicate that the energy conversion efficiency of the device can be improved by optimizing the hydrodynamic performance of the buoy. However, the absorption efficiency of a single buoy for wave energy is limited, so it is very difficult to achieve full absorption of wave energy.</p>
</abstract>

The oscillating buoy wave energy converter (OBWEC) captures wave energy through the undulating movement of the buoy in the waves. In the process of capturing wave energy, the hydrodynamic performance of the buoy plays an important role. This paper designed the “Haida No. 1” OBWEC, in which the buoy adopts a form of swinging motion. In order to further improve the hydrodynamic performance of the buoy, a 2D numerical wave tank (NWT) model is established using ADINA software based on the working principle of the device. According to the motion equation of the buoy in the waves, the influence of the buoy shape, arm length, tilt angle, buoy draft, buoy width, wave height and Power Take-off (PTO) damping on the hydrodynamic performance of the buoy is studied. Finally, a series of physical experiments are performed on the device in a laboratory pool. The experimental results verify the consistency of the numerical results. The research results indicate that the energy conversion efficiency of the device can be improved by optimizing the hydrodynamic performance of the buoy. However, the absorption efficiency of a single buoy for wave energy is limited, so it is very difficult to achieve full absorption of wave energy.

Numerical Study on the Optimization of Hydrodynamic Performance of Oscillating Buoy Wave Energy Converter

Polish Maritime Research

This work is licensed under the Creative Commons Attribution 4.0 International License.

The oscillating buoy wave energy converter (OBWEC) captures wave energy through the undulating movement of the buoy in the waves. In the process of capturing...

Numerical Study on the Optimization of Hydrodynamic Performance of Oscillating Buoy Wave Energy Converter

Pubblicato online: 30 apr 2021

Pagine: 48 - 58

DOI: https://doi.org/10.2478/pomr-2021-0005

Parole chiave
wave energy converter, hydrodynamic performance, numerical simulation, physical experiment

© 2021 Wenbin Lai et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Numerical Study on the Optimization of Hydrodynamic Performance of Oscillating Buoy Wave Energy Converter

Pubblicato online: 30 apr 2021

Pagine: 48 - 58

DOI: https://doi.org/10.2478/pomr-2021-0005

Parole chiavewave energy converter, hydrodynamic performance, numerical simulation, physical experiment

© 2021 Wenbin Lai et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Parole chiave
wave energy converter, hydrodynamic performance, numerical simulation, physical experiment