<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The bearing response of pile foundations for cross-sea bridge subjected to lateral loading is investigated through threedimensional finite element numerical analyses. In the analyses, non-linear behavior of concrete is simulated using smeared cracking model, and the strain-stress relationship of rebar is modeled through perfectly elasto-plastic model obeying Mises yield criterion. The finite element model is validated against published lateral static loading test in situ. The effect of reinforcement ratio of reinforced concrete and vertical load level is explored on the displacement of pile head and lateral capacity of pile. The results show that for the pile with low reinforcement ratio, the allowable lateral capacity is controlled by concrete cracking, however the allowable lateral capacity is controlled by the displacement of pile head with high reinforcement ratio. The vertical load applied on the pile head may reduce its displacement but increase simultaneously the maximum moment in the pile body. Therefore, the optimum vertical load level is 0.4~0.6 times of the vertical ultimate load of a single pile.</p></abstract>

The bearing response of pile foundations for cross-sea bridge subjected to lateral loading is investigated through threedimensional finite element numerical analyses. In the analyses, non-linear behavior of concrete is simulated using smeared cracking model, and the strain-stress relationship of rebar is modeled through perfectly elasto-plastic model obeying Mises yield criterion. The finite element model is validated against published lateral static loading test in situ. The effect of reinforcement ratio of reinforced concrete and vertical load level is explored on the displacement of pile head and lateral capacity of pile. The results show that for the pile with low reinforcement ratio, the allowable lateral capacity is controlled by concrete cracking, however the allowable lateral capacity is controlled by the displacement of pile head with high reinforcement ratio. The vertical load applied on the pile head may reduce its displacement but increase simultaneously the maximum moment in the pile body. Therefore, the optimum vertical load level is 0.4~0.6 times of the vertical ultimate load of a single pile.

Effect of Reinforcement Ratio and Vertical Load Level on Lateral Capacity of Bridge Pile Foundations

Polish Maritime Research

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

The bearing response of pile foundations for cross-sea bridge subjected to lateral loading is investigated through threedimensional finite element numerical...

Effect of Reinforcement Ratio and Vertical Load Level on Lateral Capacity of Bridge Pile Foundations

Pubblicato online: 11 gen 2019

Pagine: 120 - 126

DOI: https://doi.org/10.2478/pomr-2018-0120

Parole chiave
cross-sea bridge, pile foundations, lateral capacity, concrete damage, numerical analysis

© 2019 Fan Qinglai, Gao Yufeng, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Effect of Reinforcement Ratio and Vertical Load Level on Lateral Capacity of Bridge Pile Foundations

Pubblicato online: 11 gen 2019

Pagine: 120 - 126

DOI: https://doi.org/10.2478/pomr-2018-0120

Parole chiavecross-sea bridge, pile foundations, lateral capacity, concrete damage, numerical analysis

© 2019 Fan Qinglai, Gao Yufeng, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Parole chiave
cross-sea bridge, pile foundations, lateral capacity, concrete damage, numerical analysis