<abstract xmlns="http://www.w3.org/1999/xhtml"><p>A plate-cavity coupling method based on modal expansion technique in the closed sound cavity was introduced, aiming at ship cabin structural noise. Using this method, a coupled equation was established. The structural vibration acceleration of the target cabin was extracted from a ship vibration response calculation, applied to the model. Then the target cabin noise value was obtained through numerical calculation. The effectiveness and reliability of the method were validated through experiments. The coupled model predicts noise in the cabin does not require fluid finite element model of the cabin air, thus greatly reducing the calculation time compared with the pure finite element method. It was shown that the method is suitable for the calculation of noise in a single ship cabin; the method has a high calculation efficiency. Furthermore, the calculated result is a continuum. On the one hand, it can be conveniently converted to an octave or 1/3 octave according to the specification. On the other hand, the form of the continuum also provides a corresponding response to the subsequent vibration and noise control.</p></abstract>

A plate-cavity coupling method based on modal expansion technique in the closed sound cavity was introduced, aiming at ship cabin structural noise. Using this method, a coupled equation was established. The structural vibration acceleration of the target cabin was extracted from a ship vibration response calculation, applied to the model. Then the target cabin noise value was obtained through numerical calculation. The effectiveness and reliability of the method were validated through experiments. The coupled model predicts noise in the cabin does not require fluid finite element model of the cabin air, thus greatly reducing the calculation time compared with the pure finite element method. It was shown that the method is suitable for the calculation of noise in a single ship cabin; the method has a high calculation efficiency. Furthermore, the calculated result is a continuum. On the one hand, it can be conveniently converted to an octave or 1/3 octave according to the specification. On the other hand, the form of the continuum also provides a corresponding response to the subsequent vibration and noise control.

Low to Middle Vibro-Acoustic Noise Prediction in Ship Cabin by Using Plate-Cavity Coupling Model

School of Civil Engineering and Transportation

Polish Maritime Research

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

A plate-cavity coupling method based on modal expansion technique in the closed sound cavity was introduced, aiming at ship cabin structural noise. Using this...

Low to Middle Vibro-Acoustic Noise Prediction in Ship Cabin by Using Plate-Cavity Coupling Model

Pubblicato online: 10 set 2018

Pagine: 149 - 157

DOI: https://doi.org/10.2478/pomr-2018-0086

Parole chiave
low to middle frequencies, vibration, ship noise, analysis model, rapid calculation method

© 2018 Zhenwei Zhou et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Low to Middle Vibro-Acoustic Noise Prediction in Ship Cabin by Using Plate-Cavity Coupling Model

Pubblicato online: 10 set 2018

Pagine: 149 - 157

DOI: https://doi.org/10.2478/pomr-2018-0086

Parole chiavelow to middle frequencies, vibration, ship noise, analysis model, rapid calculation method

© 2018 Zhenwei Zhou et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Parole chiave
low to middle frequencies, vibration, ship noise, analysis model, rapid calculation method