[
[1] Yamaguchi, H., Shinmura, T., Kobayashi, A.: JSME Int. J. Series C, vol. 44, no. 1, 2001, p. 275.
]Search in Google Scholar
[
[2] Yin, S., Shinmura, T.: J. Japan Soc. Abrasive Technol., vol. 46, no. 3, 2002, p. 141.
]Search in Google Scholar
[
[3] Bando, S., Tsukada, A., Kondo, Y.: J. Japan Soc. Abrasive Technol., vol. 45, no. 1, 2001, p. 46.
]Search in Google Scholar
[
[4] Mehrdad, V., Nader, V.: J. Vac. Sci. & Technol., vol. 27, no. 3, 2009, p. 1503.
]Search in Google Scholar
[
[5] Chang, GW., Yan, BH., Hsu, RT.: Int. J. Mach. Tools & Manuf., vol. 42, 2002, p. 575.
]Search in Google Scholar
[
[6] Singh, L., Khangura, SS., Mishra, PS.: Int. J. Abrasive Technol., vol. 3, no. 3, 2010, p. 215.
]Search in Google Scholar
[
[7] Singh, P., Singh, L., Singh S.: Powder Metallurgy Progress, vol. 19, no. 2, 2019, p. 82.
]Search in Google Scholar
[
[8] Yamaguchi, H., Hanada, K.: J. Manuf. Sci. & Eng., vol. 130, 2008, p. 031107.
]Search in Google Scholar
[
[9] Jain, VK., Adsul, SG.: Int. J. Mach. Tools & Manuf., vol. 40, 2000, p. 1003.
]Search in Google Scholar
[
[10] Jha, S., Jain, VK.: Int. J. Mach. Tools & Manuf., vol. 44, 2004, p. 1019.
]Search in Google Scholar
[
[11] Kar, KK., Ravikumar, NL., Kumar, P., Tailor, B., Ramkumar, J., Sathiyamoorthy, D.: J. Mater. Processing Technol., vol. 209, 2009, p. 2212.
]Search in Google Scholar
[
[12] Kenda, J., Pusavec, F., Kermouche, G., Kopac, J.: CIRP Conference on Surface Integrity (CSI), vol. 19, 2011, p. 172.
]Search in Google Scholar
[
[13] Singh, S., Shan, HS.: Int. J. Mach. Tools & Manuf., vol. 42, 2002, p. 953.
]Search in Google Scholar
[
[14] Singh, S., Shan, HS., Kumar, P.: J. Mater. Processing Technol., vol. 128, 2002, p. 155.
]Search in Google Scholar
[
[15] Sankar, MR., Ramkumar, J., Jain, VK.: Wear 266, 2009, p.688.
]Search in Google Scholar
[
[16] Tzeng, HJ., Yan, BH., Hsu, RT., Chow, HM.: Int. J. Adv. Manuf. Technol., vol. 34, 2007, p. 649.
]Search in Google Scholar
[
[17] Sran, LS., Khangura, SS., Singh, A.: In ASME International Manufacturing Science and Engineering Conference Notre Dame Indiana USA, 2012, p. 933.
]Search in Google Scholar
[
[18] Patil, MG., Chandra, K., Mishra, PS.: Int. J. of Sci. Eng. & Res., vol. 3, no. 10, 2012, p. 1.
]Search in Google Scholar
[
[19] Singh, A., Singh, S., Singh, L.: Int. J. Adv. Manag. Technol. Eng. Sci., vol. 7, no. 11, 2017, p. 246.
]Search in Google Scholar
[
[20] Dehghan, GA., Vahdati, M.: J. Eng. Manuf.: Part B, vol. 229, no. 9, 2015, p. 1517.
]Search in Google Scholar
[
[21] Sankar, MR., Jain, VK., Ramkumara, J., Joshi, YM.: Int. J. Mach. Tools & Manuf., vol. 51, no. 12, 2001, p. 947.
]Search in Google Scholar
[
[22] Sachin, S., Deepu, K., Ravi, SM., Jain, VK.: Int. J. Adv. Manuf. Technol., vol. 100, no. 5-8, 2018, p. 1165.
]Search in Google Scholar
