<abstract xmlns="http://www.w3.org/1999/xhtml">

Maintaining a stable carbon dioxide content in the process of producing breathing air is important both for the safety of divers performing underwater work and for avoiding financial losses resulting from poor product quality. This paper deals with the implementation of safety measurement systems for online control of the breathing air production process. On the basis of a qualified control system, the capability of the rationalised process was assessed, identifying both its current status and its potential for improvement in terms of eliminating defects caused by excessive carbon dioxide content. For process reasons, the effectiveness of online process monitoring was evaluated against the previously used periodic sample control by means of laboratory methods of instrumental analysis. The analysis was conducted at KTPP AMW1 for the compressed air supply system of the DGKN - 1202 complex.
</abstract>

Maintaining a stable carbon dioxide content in the process of producing breathing air is important both for the safety of divers performing underwater work and for avoiding financial losses resulting from poor product quality. This paper deals with the implementation of safety measurement systems for online control of the breathing air production process. On the basis of a qualified control system, the capability of the rationalised process was assessed, identifying both its current status and its potential for improvement in terms of eliminating defects caused by excessive carbon dioxide content. For process reasons, the effectiveness of online process monitoring was evaluated against the previously used periodic sample control by means of laboratory methods of instrumental analysis. The analysis was conducted at KTPP AMW1 for the compressed air supply system of the DGKN - 1202 complex.

Use of a Carbon Dioxide Measurement System to Control the Process of Obtaining Breathing Air for Hyperbaric Oxygen Conditions

Department of Underwater Works Technology of the Naval Academy in Gdynia

Polish Hyperbaric Research

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Maintaining a stable carbon dioxide content in the process of producing breathing air is important both for the safety of divers performing underwater work and...

Use of a Carbon Dioxide Measurement System to Control the Process of Obtaining Breathing Air for Hyperbaric Oxygen Conditions

Pubblicato online: 05 apr 2022

Pagine: 7 - 26

Ricevuto: 15 feb 2020

Accettato: 27 mar 2020

DOI: https://doi.org/10.2478/phr-2020-0020

Parole chiave
process capability, diving breathing air quality, diving gases, measurement systems, process variation, carbon dioxide elimination

© 2020 Arkadiusz Woźniak, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Use of a Carbon Dioxide Measurement System to Control the Process of Obtaining Breathing Air for Hyperbaric Oxygen Conditions

Pubblicato online: 05 apr 2022

Pagine: 7 - 26

Ricevuto: 15 feb 2020

Accettato: 27 mar 2020

DOI: https://doi.org/10.2478/phr-2020-0020

Parole chiaveprocess capability, diving breathing air quality, diving gases, measurement systems, process variation, carbon dioxide elimination

© 2020 Arkadiusz Woźniak, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Parole chiave
process capability, diving breathing air quality, diving gases, measurement systems, process variation, carbon dioxide elimination