<abstract xmlns="http://www.w3.org/1999/xhtml"><p>This paper presents a new concept for a power electronic converter - the extended T-type (eT) inverter, which is a combination of a three-phase inverter and a three-level direct current (dc)/dc converter. The novel converter shows better performance than a comparable system composed of two converters: a T-type inverter and a boost converter. At first, the three-level dc/dc converter is able to boost the input voltage but also affects the neutral point potential. The operation principles of the eT inverter are explained and a simulation study of the SiC-based 6 kVA system is presented in this paper. Presented results show a serious reduction of the DC-link capacitors and the input inductor. Furthermore, suitable SiC power semiconductor devices are selected and power losses are estimated using Saber software in reference to a comparative T-type inverter. According to the simulations, the 50 kHz/6 kVA inverter feed from the low voltage (250 V) shows &lt;2.5% of power losses in the suggested SiC metal oxide-semiconductor field-effect transistors (MOSFETs) and Schottky diodes. Finally, a 6 kVA laboratory model was designed, built and tested. Conducted measurements show that despite low capacitance (2 × 30 μF/450 V), the neutral point potential is balanced, and the observed efficiency of the inverter is around 96%.</p></abstract>

This paper presents a new concept for a power electronic converter - the extended T-type (eT) inverter, which is a combination of a three-phase inverter and a three-level direct current (dc)/dc converter. The novel converter shows better performance than a comparable system composed of two converters: a T-type inverter and a boost converter. At first, the three-level dc/dc converter is able to boost the input voltage but also affects the neutral point potential. The operation principles of the eT inverter are explained and a simulation study of the SiC-based 6 kVA system is presented in this paper. Presented results show a serious reduction of the DC-link capacitors and the input inductor. Furthermore, suitable SiC power semiconductor devices are selected and power losses are estimated using Saber software in reference to a comparative T-type inverter. According to the simulations, the 50 kHz/6 kVA inverter feed from the low voltage (250 V) shows <2.5% of power losses in the suggested SiC metal oxide-semiconductor field-effect transistors (MOSFETs) and Schottky diodes. Finally, a 6 kVA laboratory model was designed, built and tested. Conducted measurements show that despite low capacitance (2 × 30 μF/450 V), the neutral point potential is balanced, and the observed efficiency of the inverter is around 96%.

Extended T-type Inverter

Power Electronics and Drives

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

{"article-title":"Extended T-type Inverter"}

This paper presents a new concept for a power electronic converter - the extended T-type (eT) inverter, which is a combination of a three-phase inverter and a...

Extended T-type Inverter

Pubblicato online: 17 nov 2018

Pagine: 55 - 64

Ricevuto: 23 mag 2018

Accettato: 25 lug 2018

DOI: https://doi.org/10.2478/pead-2018-0015

Parole chiave
Multilevel inverter, T-type inverter, Boost converter, Silicon carbide

© 2018 Jacek Rąbkowski, Rafał Kopacz, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Extended T-type Inverter

Pubblicato online: 17 nov 2018

Pagine: 55 - 64

Ricevuto: 23 mag 2018

Accettato: 25 lug 2018

DOI: https://doi.org/10.2478/pead-2018-0015

Parole chiaveMultilevel inverter, T-type inverter, Boost converter, Silicon carbide

© 2018 Jacek Rąbkowski, Rafał Kopacz, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Parole chiave
Multilevel inverter, T-type inverter, Boost converter, Silicon carbide