This work is licensed under the Creative Commons Attribution 4.0 International License.
Abbas, N., & Burhan, A. (2022). Investigating the causes of poor cost control in Iraqi construction projects. Engineering, Technology and Applied Science Research, 12(1), pp. 8075-8079.AbbasN. & BurhanA. (2022).Investigating the causes of poor cost control in Iraqi construction projects.,12(1), pp.8075-8079.Search in Google Scholar
Ahmed, A., & Altaie, M. (2021). Investigation the Opportunity of BIM with Agile Management Approach in Iraqi Construction Projects. EDP Sciences. doi: 10.1051/e3sconf/202131802001.AhmedA. & AltaieM. (2021)..EDP Sciences. doi:10.1051/e3sconf/202131802001.Open DOISearch in Google Scholar
Al Hamadani, S., Al Alawi, M., & Al Nuaimi, A. (2022). Constructability Practices in Construction industry in Muscat: Case study. Springer Nature Switzerland AG. doi: 10.1007/s42107-022-00475-3.Al HamadaniS.Al AlawiM. & Al NuaimiA. (2022)..Springer Nature Switzerland AG. doi:10.1007/s42107-022-00475-3.Open DOISearch in Google Scholar
Al-Fadhli, S. (2022). Value engineering and constructability assessment relating infrastructure projects. In: IOP Conference Series: Materials Science and Engineering. doi: 10.1088/1757-899X/737/1/012040.Al-FadhliS. (2022).. In:IOP Conference Series: Materials Science and Engineering. doi:10.1088/1757-899X/737/1/012040.Open DOISearch in Google Scholar
Boton, C. (2018). Supporting constructability analysis meetings with immersive virtual reality-based collaborative BIM 4D simulation. Automation in Construction, 96, pp. 1-15.BotonC. (2018).Supporting constructability analysis meetings with immersive virtual reality-based collaborative BIM 4D simulation.,96, pp.1-15.Search in Google Scholar
CII (Construction Industry Institute) (2019, July). CII’s Impact, Available at https://www.construction-institute.org/membership/ciis-impact.CII (Construction Industry Institute)(2019,July).,Available at https://www.construction-institute.org/membership/ciis-impact.Search in Google Scholar
Farooqui, R., & Ahmed, S. (2008). Assessment of constructability practices among general contractors in Pakistan’s Construction Industry. Journal of Engineering, Project, and Production Management, 11, pp. 169-180.FarooquiR. & AhmedS. (2008).Assessment of constructability practices among general contractors in Pakistan’s Construction Industry.,11, pp.169-180.Search in Google Scholar
Frost, J. (2022). ‘Cronbach’s Alpha: Definition, Calculations & Example, Statistics By Jim. Available at https://statisticsbyjim.com/basics/cronbachs-alpha/[accessed 10 September, 2022].FrostJ. (2022).‘Cronbach’s Alpha: Definition, Calculations & Example,.Available at https://statisticsbyjim.com/basics/cronbachs-alpha/[accessed 10 September, 2022].Search in Google Scholar
Gambatese, J., Pocock, J., & Dunston, P. (2007). Constructability Concepts and Practice, Construction Institute. American Society of Civil Engineers, Reston, VA.GambateseJ.PocockJ. & DunstonP. (2007)..American Society of Civil Engineers,Reston, VA.Search in Google Scholar
Garcia, M. (2009). Introduction to CII Practices. Special presentation to American Council for Construction Education, Jacksonville.GarciaM. (2009)..Special presentation to American Council for Construction Education,Jacksonville.Search in Google Scholar
Hijazi, W., Alkass, S., Eng, P., & Zayed, T. (2009). Constructability Assessment using BIM/4D CAD Simulation Model. AACE International Transactions.HijaziW.AlkassS.EngP. & ZayedT. (2009)..AACE International Transactions.Search in Google Scholar
Højbjerg, K., Kirkegaard, P., & Beatini, V. (2021). Implementation of constructability in conceptual design. In: The 7th International Conference on Spatial Structures Inspiring the Next Generation. doi: 10.15126/900337vHøjbjergK.KirkegaardP. & BeatiniV. (2021).. In:The 7th International Conference on Spatial Structures Inspiring the Next Generation. doi:10.15126/900337vOpen DOISearch in Google Scholar
Khan, S. (2019). Constructability a Tool for Project Management. Taylor & Francis Group, Boca Raton.KhanS. (2019)..Taylor & Francis Group,Boca Raton.Search in Google Scholar
Kifokeris, D., & Xenidis, Y. (2017). Constructability: Outline of past, present, and future research. Journal of Construction Engineering and Management, 143(8), pp. 1-13.KifokerisD. & XenidisY. (2017).Constructability: Outline of past, present, and future research.,143(8), pp.1-13.Search in Google Scholar
Kotze, D., & Wium, J. (2019). Structural design constructability verification using BIM. In: Conference: IABSE Congress the EvolvingMetropolis. doi: 10.2749/newyork.2019.1573.KotzeD. & WiumJ. (2019).. In:Conference: IABSE Congress the EvolvingMetropolis. doi:10.2749/newyork.2019.1573.Open DOISearch in Google Scholar
Nolan, P., & Gibson, G. (2022). Constructability in the design process: A review of current practice within the UK Construction Industry. In: The Canadian Society of Civil Engineering Annual Conference.NolanP. & GibsonG. (2022).. In:The Canadian Society of Civil Engineering Annual Conference.Search in Google Scholar
Othman, A. (2011). Improving building performance through integrating constructability in the design process. Organization, Technology and Management in Construction: An International Journal, 3(2), pp. 333-347.OthmanA. (2011).Improving building performance through integrating constructability in the design process.,3(2), pp.333-347.Search in Google Scholar
Pocock, J., Kuennen, S., Gambatese, J., & Rauschkolb, J. (2006). Constructability state of practice report. Journal of Construction Engineering and Management, ASCE, 132(4), pp. 373-383.PocockJ.KuennenS.GambateseJ. & RauschkolbJ. (2006).Constructability state of practice report.,ASCE,132(4), pp.373-383.Search in Google Scholar
Qi, B., Costin, A., & Razkenari, M. (2022). An ontology for manufacturability and constructability of prefabricated component. In: ASCE International Conference on Computing in Civil Engineering. doi: 10.1061/9780784483893.092.QiB.CostinA. & RazkenariM. (2022).. In:ASCE International Conference on Computing in Civil Engineering. doi:10.1061/9780784483893.092.Open DOISearch in Google Scholar
Rashed, S., & Mahjoob, A. (2014). Solving time-cost tradeoff problem with resource constraint using fuzzy mathematical model. Journal of Engineering, 20.RashedS. & MahjoobA. (2014).Solving time-cost tradeoff problem with resource constraint using fuzzy mathematical model.,20.Search in Google Scholar
Rezouki, S., & Alhilli, H. (2022). The causes influencing the occurrence of variation orders in the construction of buildings. Journal of Engineering, 27(8).RezoukiS. & AlhilliH. (2022).The causes influencing the occurrence of variation orders in the construction of buildings.,27(8).Search in Google Scholar
Russel, S., Swiggum, E., Shapiro, M., & Alaydrus, F. (1994). Constructability related to TQM, value engineering, and cost/benefits. Journal of Performance of Constructed Facilities, pp. 31-45.RusselS.SwiggumE.ShapiroM. & AlaydrusF. (1994).Constructability related to TQM, value engineering, and cost/benefits., pp.31-45.Search in Google Scholar
Science Buddies (2022). Variance & Standard Deviation. Available at https://www.sciencebuddies.org/science-fair-projects/science-fair/variance-and-standard-deviation [accessed 10 September, 2022].Science Buddies(2022)..Available at https://www.sciencebuddies.org/science-fair-projects/science-fair/variance-and-standard-deviation[accessed 10 September, 2022].Search in Google Scholar
Shash, A., & Almufadhi, S. (2021). Constructability: Owners, designers, and contractors practices in industrial projects. Journal of Engineering, Project, and Production Management, 11(3), pp. 169-180.ShashA. & AlmufadhiS. (2021).Constructability: Owners, designers, and contractors practices in industrial projects.,11(3), pp.169-180.Search in Google Scholar
Tauriainen, M., Mero, A., Lemström, A., Puttonen, J., & Saari, A. (2012). The Development of Constructability using BIM as an Intensifying Technology. Taylor & Francis Group, Finland, Aalto University, Espoo. doi: 10.1201/b12516-112.TauriainenM.MeroA.LemströmA.PuttonenJ. & SaariA. (2012)..Taylor & Francis Group, Finland, Aalto University,Espoo. doi:10.1201/b12516-112.Open DOISearch in Google Scholar
Tauriainen, M., Puttonen, J., & Saari, A. (2015). The assessment of constructability: BIM cases. Journal of Information Technology in Construction (ITcon), 20, pp. 51-67.TauriainenM.PuttonenJ. & SaariA. (2015).The assessment of constructability: BIM cases.,20, pp.51-67.Search in Google Scholar
Thirion, C. (2019). Introduction to Constructability and Constucta bility Programmes. Owner Team Consultation.ThirionC. (2019)..Owner Team Consultation.Search in Google Scholar
Unite for Sight, (2021). The Importance of Quality Sample Size. Available at https://www.uniteforsight.org/global-health-university/importance-of-quality-sample-size [accessed 31 December, 2022].Unite for Sight, (2021)..Available at https://www.uniteforsight.org/global-health-university/importance-of-quality-sample-size[accessed 31 December, 2022].Search in Google Scholar
Yang, H., Lee, M., Siao, F., & Lin, Y. (2013). Use of BIM for construtability analysis in construction. In: Proceedings of the Thirteenth East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-13).YangH.LeeM.SiaoF. & LinY. (2013).. In:Proceedings of the Thirteenth East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-13).Search in Google Scholar
Yoon, J., Yu, I., & Jung, D. (2018). Factors needed for the development of a constructability assessment model for building renovation and extension in Korea. In: Proceedings of the 34th Annual ARCOM Conference, pp. 806-814.YoonJ.YuI. & JungD. (2018).. In:Proceedings of the 34th Annual ARCOM Conference, pp.806-814.Search in Google Scholar
Zhang, C., Zayed, T., Hijazi, W., & Alkass, S. (2016). Quantitative Assessment of Building Constructability using BIM and 4D Simulation. Scientific Research Publishing, pp. 442-461.ZhangC.ZayedT.HijaziW. & AlkassS. (2016)..Scientific Research Publishing, pp.442-461.Search in Google Scholar
Zolfagharian, S., & Irizarry, J. (2017). Constructability Assessment Model for Commercial Building Designs in the United States. American Society of Civil Engineers. doi: 10.1061/(ASCE)CO.19437862.0001323.ZolfagharianS. & IrizarryJ. (2017)..American Society of Civil Engineers. doi:10.1061/(ASCE)CO.19437862.0001323.Open DOISearch in Google Scholar