A Refined Model for Predicting Concrete-Related Failure Load of Tension Loaded Cast-in-Place Headed Anchors in Uncracked Concrete

1. Eligehausen R, Mallée R & Silva J F: “Anchorage in Concrete Construction”. Ernst & Sohn, Berlin, Germany, 2006, 378 pp.Search in Google Scholar

2. ACI Committee 349: “Code Requirements for Nuclear Safety-Related Concrete Structures (ACI 349-85)”. American Concrete Institute, Detroit, USA, 1985.Search in Google Scholar

3. Fuchs W, Eligehausen R & Breen J E: “Concrete Capacity Design (CCD) Approach for Fastening to Concrete”. ACI Structural Journal, Vol. 92, No. 1, 1995, pp. 73–94.10.14359/1533Search in Google Scholar

4. CEB: “Design of Fastenings in Concrete, Comité Euro-International du Béton”. Thomas Telford, Lausanne, Switzerland, 1997, 92 pp.Search in Google Scholar

5. CEN/TS 1992-4: “CEN Technical Specification (TS): Design of Fastenings for Use in Concrete, Final Draft”. European Organization for Standardization (CEN), Brussels, Belgium, 2009, 166 pp.Search in Google Scholar

6. fib Bulletin 58. “Design of Anchorages in concrete – Guide to good practice”. International Federation for Structural Concrete, Lausanne, Switzerland, 2011, 280 pp.Search in Google Scholar

7. ACI 349: “Code Requirements for Nuclear Safety-Related Concrete Structures, Appendix D”. American Concrete Institute, Farmington Hills, MI, USA, 2006.Search in Google Scholar

8. ACI 318: “Building Code Requirements for Structural Concrete and Commentary”. American Concrete Institute, Farmington Hills, MI, USA, 2014, 524 pp.Search in Google Scholar

9. Ožbolt J, Eligehausen R, Periškić G & Mayer U: “3D FE Analysis of Anchor Bolts with Large Embedment Depths,” Engineering Fracture Mechanics, Vol. 74, Nos. 1-2, 2007, pp.168-178.10.1016/j.engfracmech.2006.01.019Search in Google Scholar

10. Eligehausen R, Bouška P, Červenka V & Pukl, R: “Size Effect of the Concrete Cone Failure Load of Anchor Bolts”. Proceedings, 1^st International Conference of Fracture Mechanics of Concrete Structures (FRAMCOS 1), Z.P. Bazant, ed., 1992, pp. 517–525.Search in Google Scholar

11. Nilsson M, Ohlsson U & Elfgren L: “Effects of Surface Reinforcement on Bearing Capacity of Concrete with Anchor Bolts.” Nordic Concrete Research, No. 44, 2011, pp. 161–174.Search in Google Scholar

12. Zhao G: “Tragverhalten von randfernen Kopfbolzenverankerungen bei Betonbruch”. Ph.D. Dissertation, University of Stuttgart, Stuttgart, Germany, 1993, 204 pp. (In German).Search in Google Scholar

13. Lee, N. H., Kim, K. S., Bang, C. J., & Park, K. R., (2007). “Tensile-headed anchors with large diameter and deep embedment in concrete”. ACI Structural Journal, Vol. 104, No. 4, 2007, pp. 479-486.10.14359/18778Search in Google Scholar

14. Ožbolt J, Li Y & Kožar I: “Microplane Model for Concrete with Relaxed Kinematic Constraint,” International Journal of Solids and Structures, Vol. 38, No. 16, 2001, pp. 2683-2711.10.1016/S0020-7683(00)00177-3Apri DOISearch in Google Scholar

15. Bažant Z P & Oh B H: “Crack Band Theory for Fracture of Concrete,” Materials and Structures (RILEM), Vol. 16, No. 3, 1983, pp. 155-177.10.1007/BF02486267Search in Google Scholar

16. Nilforoush R: “Anchorage in Concrete Structures: Numerical and Experimental Evaluations of Load-Carrying Capacity of Cast-in-Place Headed Anchors and Post-Installed Adhesive Anchors”. Ph.D. Dissertation, Dep. of Civil, Environment and Natural Resources Engineering, Div. of Structural and Fire Engineering, Luleå University of Technology, Luleå, Sweden, 2017, 354 pp.Search in Google Scholar

17. EN 12390-3 (2009). “Testing hardened concrete. Compressive strength of test specimens”. 19 pp.Search in Google Scholar

18. EN 12390-6 (2009). “Testing hardened concrete. Tensile splitting strength of test specimens”. 11 pp.Search in Google Scholar

19. Nilforoush R, Nilsson M, Elfgren L, Ožbolt J, Hofmann J & Eligehausen, R: “Tensile Capacity of Anchor Bolts in Uncracked Concrete: Influence of Member Thickness and Anchor’s Head Size”. ACI Structural Journal, Vol. 114, No. 6, 2017, pp. 1519-153010.14359/51689503Search in Google Scholar

20. Nilforoush R, Nilsson M, Elfgren L, Ožbolt J, Hofmann J & Eligehausen R: “Influence of Surface Reinforcement, Member Thickness, and Cracked Concrete on Tensile Capacity of Anchor Bolts”. ACI Structural Journal, Vol. 114, No. 6, 2017, pp. 1543-155610.14359/51689505Search in Google Scholar

21. Nilforoush, R., Nilsson, M., Elfgren, L., “Experimental Evaluation of Influence of Member Thickness, Anchor-Head Size, and Reinforcement on the Tensile Capacity of Headed Anchors in Uncracked Concrete”, Journal of Structural Engineering, Vol. 144, No. 4, 2018, 14 pp, 04018012-1-14.10.1061/(ASCE)ST.1943-541X.0001976Search in Google Scholar

• Is Cement Paste Modified with Carbon Nanomaterials Capable of Self-Repair after a Fire?
• Effect of Set Accelerator on Capillary Suction and Porosity of Concrete – Cast Samples with Constant Water/Binder Ratio
• Preface
• Evaluation of Crushed Fine Materials
• Failure Mechanisms of Fibre Reinforced Shotcrete: Numerical Simulations Considering Local Variations in Thickness and Bond Strength
• Effect of High-Pressure Washing on Chloride Ingress in Concrete – Development of an Accelerated Test Method
• Empirical Modelling of Lithium Mitigation for Alkali-Silica Reactivity