<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>This article presents a study carried out on a 2 kN·m torque transducer at the Central Office of Measures (GUM) and the Physikalisch-Technische Bundesanstalt (PTB). The weighted least squares method was used to generate the linear regression equations for this torque transducer. The Monte Carlo method and the law of uncertainty propagation were used to calculate the expanded uncertainty. In addition, a creep study was carried out at eight measurement points ranging from 200 N·m to 2000 N·m. The investigations showed that the highest readings of the torque transducer, expressed in electrical units as mV/V, occur within the initial few seconds of the test after the removal of the maximum reference torque.</p>
</abstract>

This article presents a study carried out on a 2 kN·m torque transducer at the Central Office of Measures (GUM) and the Physikalisch-Technische Bundesanstalt (PTB). The weighted least squares method was used to generate the linear regression equations for this torque transducer. The Monte Carlo method and the law of uncertainty propagation were used to calculate the expanded uncertainty. In addition, a creep study was carried out at eight measurement points ranging from 200 N·m to 2000 N·m. The investigations showed that the highest readings of the torque transducer, expressed in electrical units as mV/V, occur within the initial few seconds of the test after the removal of the maximum reference torque.

Study of a 2 kN·m Torque Transducer Tested at GUM and PTB, Including Creep Behaviour

Measurement Science Review

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

This article presents a study carried out on a 2 kN·m torque transducer at the Central Office of Measures (GUM) and the Physikalisch-Technische Bundesanstalt...

Study of a 2 kN·m Torque Transducer Tested at GUM and PTB, Including Creep Behaviour

Pubblicato online: 13 apr 2024

Pagine: 88 - 94

Ricevuto: 01 ago 2023

Accettato: 12 mar 2024

DOI: https://doi.org/10.2478/msr-2024-0012

Parole chiave
Creep, torque transducer, uncertainty, calibration, wind energy

© 2024 Janusz D. Fidelus et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Study of a 2 kN·m Torque Transducer Tested at GUM and PTB, Including Creep Behaviour

Pubblicato online: 13 apr 2024

Pagine: 88 - 94

Ricevuto: 01 ago 2023

Accettato: 12 mar 2024

DOI: https://doi.org/10.2478/msr-2024-0012

Parole chiaveCreep, torque transducer, uncertainty, calibration, wind energy

© 2024 Janusz D. Fidelus et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Parole chiave
Creep, torque transducer, uncertainty, calibration, wind energy