<abstract xmlns="http://www.w3.org/1999/xhtml"><p>More and more EMC tests have shown that the radiated emission problems of the equipment under test mainly concentrate on the intercon- nected power cables and cable connectors. Measurement of shielding performance is a prerequisite for quantitative and qualitative evaluation of the frequency-dependent characteristic of braided-shield power cables and cable connectors. Due to the asymmetric geometric structures of these cable assemblies, compared with the coaxial and symmetrical communication cables, the commonly used transfer impedance testing methods may not be suitable. In view of this, several improved simple and effective measurement methods, including transfer impedance and shield reduction factor testing methods, were proposed in recent years. These methods, based on the equivalent circuit model of the characteristic parameters, provide good repeatability for the measurement of shielding performance. This paper presents an overview analysis of various measurement techniques for shielding performance of power cables and cable connectors, highlights some of its equivalence principle in measurement setups, and showcases a brief comparison between transfer impedance and shield reduction factor.</p></abstract>

More and more EMC tests have shown that the radiated emission problems of the equipment under test mainly concentrate on the intercon- nected power cables and cable connectors. Measurement of shielding performance is a prerequisite for quantitative and qualitative evaluation of the frequency-dependent characteristic of braided-shield power cables and cable connectors. Due to the asymmetric geometric structures of these cable assemblies, compared with the coaxial and symmetrical communication cables, the commonly used transfer impedance testing methods may not be suitable. In view of this, several improved simple and effective measurement methods, including transfer impedance and shield reduction factor testing methods, were proposed in recent years. These methods, based on the equivalent circuit model of the characteristic parameters, provide good repeatability for the measurement of shielding performance. This paper presents an overview analysis of various measurement techniques for shielding performance of power cables and cable connectors, highlights some of its equivalence principle in measurement setups, and showcases a brief comparison between transfer impedance and shield reduction factor.

Measurement Techniques for Electromagnetic Shielding Behavior of Braided-Shield Power Cables: An Overview and Comparative Study

Measurement Science Review

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

More and more EMC tests have shown that the radiated emission problems of the equipment under test mainly concentrate on the intercon- nected power cables and...

Measurement Techniques for Electromagnetic Shielding Behavior of Braided-Shield Power Cables: An Overview and Comparative Study

Pubblicato online: 07 ott 2019

Pagine: 213 - 221

Ricevuto: 29 mag 2019

Accettato: 30 ago 2019

DOI: https://doi.org/10.2478/msr-2019-0028

Parole chiave
Braided-shield power cable, shielding performance, measurement techniques, transfer impedance, shield reduction factor

© 2019 Peng Hu et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Measurement Techniques for Electromagnetic Shielding Behavior of Braided-Shield Power Cables: An Overview and Comparative Study

Pubblicato online: 07 ott 2019

Pagine: 213 - 221

Ricevuto: 29 mag 2019

Accettato: 30 ago 2019

DOI: https://doi.org/10.2478/msr-2019-0028

Parole chiaveBraided-shield power cable, shielding performance, measurement techniques, transfer impedance, shield reduction factor

© 2019 Peng Hu et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Parole chiave
Braided-shield power cable, shielding performance, measurement techniques, transfer impedance, shield reduction factor