Effect of Relative Humidity on Tribological and Mechanical Properties of PA6-Based Composites

[1] Çetin, M.E., Tatar, A.C., Demir, O., Önal, G. and Avcı, A, “Effects of cryogenic and warm temperatures on quasi-static penetration resistance of carbon-aramid hybrid nanocomposites reinforced using halloysite nanotubes,” Mechanics of Materials, vol. 155, 2021 https://doi.org/10.1016/j.mechmat.2021.103780. Search in Google Scholar

[2] Bertagna, S., Braidotti, L., Laurini, E., Marinò, A., Pricl, S., & Bucci, V, “Thermoplastic Materials for the Metal Replacement of Non-Structural Components in Marine Engines,” Applied Sciences, vol. 12, 2022. https://doi.org/10.3390/app12178766. Search in Google Scholar

[3] Çetin, M.E., “The effect of carbon nanotubes modified polyurethane adhesive on the impact behavior of sandwich structures,” Polymer Composites, vol. 42 (9), 2021, pp. 4353-4365. https://doi.org/10.1002/pc.26153. Search in Google Scholar

[4] Farfan-Cabrera, I.L., Gaspar, T.M, González, P.J., “Tribology of polymer matrix composites within the automotive industry,” Encyclopedia of Materials: Composites, vol. 1, 2021, pp. 970-982. https://doi.org/10.1016/B978-0-12-819724-0.00029-X. Search in Google Scholar

[5] Pogačnik, A., Kupec, A. and Kalin, M, “Tribological properties of polyamide (PA6) in self-mated contacts and against steel as a stationary and moving body,” Wear, vol. 378-379, 2017, pp. 17-26. https://doi.org/10.1016/j.wear.2017.01.118. Search in Google Scholar

[6] Kar, K.K. and Pramanik, S. Hydroxyapatite poly(ether-etherketone) nanocomposites and method of manufacturing same. U.S. Patent, 2014, No. 8652373 B2. Search in Google Scholar

[7] Fathi, R., Ma, A., Saleh, B., Xu, Q. and Jiang, J., “Investigation on mechanical properties and wear performance of functionally graded AZ91-SiCp composites via centrifugal casting,” Materials Today Communications, vol 24. 2020, pp. 101169. https://doi.org/10.1016/j.mtcomm.2020.101169 Search in Google Scholar

[8] Kumar, S. and Panneerselvam, K., “Two-body abrasive wear behavior of nylon 6 and glass fiber reinforced (GFR) nylon 6 composite,” Procedia Technology, vol. 25, 2016 pp. 1129-1136. https://doi.org/10.1016/j.protcy.2016.08.228. Search in Google Scholar

[9] Kumar, R., Mishra, S.K., Raj, U., Sengupta, S., Chatterjee, R., Pandey, S., Mozammil Hasnain, S.M., Ragab, A.E., Dei-falla, A.F. and Jayapalan, S., “Influence of graphene nanoplatelets (GnPs) and titanium dioxide (TiO₂) hybrid fillers on the mechanical, thermal, and morphological performance of polypropylene (PP) based hybrid composites,” Polymers and Polymer Composites, vol. 32, 2024. https://doi.org/10.1177/09673911241260. Search in Google Scholar

[10] Monson, L., Braunwarth, M. and Extrand, C., “Moisture absorption by various polyamides and their associated dimensional changes,” Journal of Applied Polymer Science, vol. 107 (1), 2008, pp. 355-363. https://doi.org/10.1002/app.27057. Search in Google Scholar

[11] Deopura, B.L., Alagirusamy, R., Joshi, M. and Gupta, B. (eds) (2008) Polyesters and Polyamides. Woodhead Publishing. Search in Google Scholar

[12] Broudin, M., Le Gac, P.Y., Le Saux, V., Champy, C., Robert, G., Charrier, P. and Marco, Y., “Water diffusivity in PA66: Experimental characterization and modeling based on free volume theory,” European Polymer Journal, vol. 67, 2015, pp. 326-334. https://doi.org/10.1016/j.eurpolymj.2015.04.015. Search in Google Scholar

[13] Gautier, L., Mortaigne, B. and Bellenger, V., “Interface damage study of hydrothermally aged glass-fibre-reinforced polyester composites,” Composites Science and Technology, vol. 59(16), 1999, pp. 2329-2337. doi: 10.1016/S0266-3538(99)00085-8. Search in Google Scholar

[14] Ma, T., Zhang, Y., Ruan, K., Guo, H., He, M., Shi, X., Guo, Y., Kong, J., Gu, J., “ Advance in 3D printing for polymer composites: A review,” InfoMat, vol. 6, 2024, https://doi.org/10.1002/inf2.12568. Search in Google Scholar

[15] Park, S., Shou, W., Makatura, L., Matusik, W., Fu, K., “3D printing of polymer composites: materials, processes, and applications,” Matter, vol. 5, 2022, doi: 10.1016/j.matt.2021.10.018. Search in Google Scholar

[16] Tóth, L.F., Sukumaran, J., Stebényi, G. and De Baets, P.,”Tribo-mechanical interpretation for advanced thermoplastics and the effects of wear-induced crystallization,” Wear, vol. 440-441, 2019, pp. 203083. https://doi.org/10.1016/j.wear.2019.203083 Search in Google Scholar

[17] Xin, L., Zhike, L., Hongxin, L., Nanqi, S., Cheng, F., Bin, H., Changging, Y. and Haiyan, L., “Preparation of inorganic oil-containing carbon nanocapsules and tribological properties of PA6 composites,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 698, 2024. https://doi.org/10.1016/j.colsurfa.2024.134590. Search in Google Scholar

[18] Sun, S., Ye, J. and Cai, Z., “Heterogeneous nucleation of calcium sulfate whisker in polyamide 6 and its efficient reinforcement on tribology performance, “ Polymer Composites, vol. 46 (2), 2024, pp. 1371-1382. https://doi.org/10.1002/pc.29044. Search in Google Scholar

[19] Aparna, S., Purnima, D. and Adusumali, B.R., “Effect of short carbon fiber content and water absorption on tensile and impact properties of PA6/PP blend-based composites,” Polymer Composites, vol. 41(12), 2020, pp. 5167-5181. doi:10.1002/pc.25784. Search in Google Scholar

[20] Walter, R., Selzer, R., Gurka, M. and Friedrich, K., “Effect of filament quality, structure, and processing parameters on the properties of fused filament fabricated short fiber-reinforced thermoplastics,” Structure and Properties of Additive Manufactured Polymer Components, 2020 pp. 253-302. https://doi.org/10.1016/B978-0-12-819535-2.00009-0. Search in Google Scholar

[21] Zaghloul, M.M.Y., Steel, K., Veidt, M., Martin, D., Firouzi, M. and Heitzmann, T.M., “Influence of counter-face grit size and lubricant on the abrasive wear behaviour of thermoplastic polymers reinforced with glass fibres,” Tribology Letters, vol. 71, 2023, pp. 102. doi:10.1007/s11249-023-01774-9. Search in Google Scholar

[22] Abdulridha, H.H., Abbas, T.F. and Bedan, A.S., “Predicting mechanical strength and optimized parameters in FDM-printed polylactic acid parts via artificial neural networks and desirability analysis,” Management Systems in Production Engineering, vol. 32(3), 2024, pp. 428-437. doi: 10.2478/mspe-2024-0040. Search in Google Scholar

[23] Kumar, S. and Panneerselvam, K., “ Research on tribological behaviors of pure and glass fiber reinforced nylon 6 composites against polymer disc,” Journal of Material Science and Mechanical Engineering, vol. 2(6), 2015, pp. 24-28. https://www.researchgate.net/publica-tion/309735319_Research_on_Tribological_Behaviors_of_Pure_and_Glass_Fiber_Reinforced_Nylon_6_Composites_against_Polymer_Disc. Search in Google Scholar

[24] Dawoud, M., Taha, I. and Ebeid, S.J., “Effect of processing parameters and graphite content on the tribological behaviour of 3D printed acrylonitrile butadiene styrene,” Materials Science & Engineering Technology, vol. 46 (12), 2015, pp. 1185-1195. https://doi.org/10.1002/mawe.201500450. Search in Google Scholar

[25] Mylski, J., Godzierz, M. and Olesik, P., “Effect of carbon fillers on the wear resistance of PA6 thermoplastic composites,” Polymers, vol. 12(10), 2020. https://doi.org/10.3390/polym12102264. Search in Google Scholar

[26] Prabhakaran, R.T.D. and Toftegaard, H., “Environmental effect on the mechanical properties of commingled-yarn-based carbon fibre/polyamide 6 composites,” Journal of Composite Materials, vol. 48, 2014, pp. 2551-2565. doi:10.1177/0021998313501012. Search in Google Scholar

[27] Palma, T., Munther, M., Damasus, P., Salari, S., Beheshti, A. and Davami, K., “Multiscale mechanical and tribological characterizations of additively manufactured polyamide 12 parts with different print orientations,” Journal of Manufacturing Processes, vol. 40, 2019, pp. 76-83. https://doi.org/10.1016/j.jmapro.2019.03.004. Search in Google Scholar

[28] Mohamed, O., Masood, H. and Bhowmik, J., “Analysis of wear behavior of additively manufactured PC-ABS parts,” Materials Letters, vol. 230,2018, pp. 261-265. https://doi.org/10.1016/j.matlet.2018.07.139. Search in Google Scholar

[29] Arifvianto, B., Prayoga, B., Suyitno, D., Mahardika, M., Dharmastiti, R. and Salim, U., “Sliding wear characteristics of FDM-processed polylactic-acid in bovine blood serum,” Mechanical Engineering and Sciences, vol. 13(4), 2019, pp. 5848-5861. doi: 10.15282/jmes.13.4.2019.10.0466. Search in Google Scholar

[30] ISO 527-2 (n.d.) Plastics – Determination of tensile properties. International Organization for Standardization. Search in Google Scholar

[31] Titko, M., Novák, L. and Jánošíková, M. (2021) Praktická štatistika. Žilina: EDIS – Žilinská univerzita. ISBN 978-80-554-1814-8. Search in Google Scholar

[32] Sudin, M.N., Ramli, F.R., Alkahari, M.R. and Abdullah, M.A., “Comparison of wear behavior of ABS and ABS composite parts fabricated via fused deposition modelling,” vol. 5(1), 2018, pp.164-169. https://doi.org/10.21833/ijaas.2018.01.022. Search in Google Scholar

[33] Zhou, S., Tashiro, K. and Tadaoki, I., “Moisture effect on structure and mechanical property of nylon 6 as studied by the time-resolved and simultaneous measurements of FT-IR and dynamic viscoelasticity under the controlled humidity at constant scanning rate,” Polymer Journal, vol. 33, 2001, pp. 344-355. https://doi.org/10.1295/polymj.33.344. Search in Google Scholar

[34] Mitaľ, G., Gajdoš, I., Spišák, E., Majerníková, J. and Jezný, T., “An analysis of selected technological parameters’ influences on the tribological properties of products manufactured using the FFF technique, “Applied Sciences, vol. 12, 2022 pp. 3853. doi: https://doi.org/10.3390/app12083853. Search in Google Scholar

[35] Clavería, I., Elduque, D., Santolaria, J., Pina, C., Javierre, C. and Fernandez, A., “The influence of environmental conditions on the dimensional stability of components injected with PA6 and PA66,” Polymer Testing, vol. 50, 2016, pp. 15-25. https://doi.org/10.1016/j.polymertesting.2015.12.008. Search in Google Scholar