Effect of laser welding on the microstructure and properties of ultrathin Inconel 718 sheets

[1] Sirignano, W.A., Liu, F., Performance increases for gas-turbine engines through combustion inside the turbine, J. Propuls. Power, 1999, 15(1): 111–118 Sirignano W.A. Liu F. Performance increases for gas-turbine engines through combustion inside the turbine J. Propuls. Power 1999 15 1 111 118 Search in Google Scholar

[2] Zurfluh, T., Bond, S., A new high temperature exhaust sealing system, SAE Trans., 2007, 116: 613–619 Zurfluh T. Bond S. A new high temperature exhaust sealing system SAE Trans. 2007 116 613 619 Search in Google Scholar

[3] Special Metals Corporation, INCONEL® Alloy 718 – Technical Bulletin [Internet], Special Metals, Huntington (WV) [cited 2025 Jul 22]. https://www.specialmetals.com/assets/documents/alloys/inconel/inconel-alloy-718.pdf Special Metals Corporation INCONEL® Alloy 718 – Technical Bulletin [Internet] Special Metals Huntington (WV) [cited 2025 Jul 22] https://www.specialmetals.com/assets/documents/alloys/inconel/inconel-alloy-718.pdf

[4] Kumar, N., Dhara, S., Masters, I., Das, A., Substituting resistance spot welding with flexible laser spot welding to join ultra-thin foil of Inconel 718 to thick 410 steel, Materials, 2022, 15(9): 3405. 10.3390/ma15093405 Kumar N. Dhara S. Masters I. Das A. Substituting resistance spot welding with flexible laser spot welding to join ultra-thin foil of Inconel 718 to thick 410 steel Materials 2022 15 9 3405 10.3390/ma15093405 Open DOI

[5] Li, W., Zhang, K., Yang, H., Diao, J., Design and optimization of V-shaped metallic sealing ring for automotive exhaust pipe, Lubr. Eng., 2023, 48(7): 159–166, 220 Li W. Zhang K. Yang H. Diao J. Design and optimization of V-shaped metallic sealing ring for automotive exhaust pipe Lubr. Eng. 2023 48 7 159 166, 220 Search in Google Scholar

[6] Ohata, M., Toda, Y., Toyoda, M., Takeno, S., Control of welding distortion in fillet welds of aluminium alloy thin plates, Weld. Int., 1999, 13(12): 967–976 Ohata M. Toda Y. Toyoda M. Takeno S. Control of welding distortion in fillet welds of aluminium alloy thin plates Weld. Int. 1999 13 12 967 976 Search in Google Scholar

[7] Hou, J., Li, R., Xu, C., Li, T., Shi, Z., A comparative study on microstructure and properties of pulsed laser welding and continuous laser welding of Al-25Si-4Cu-Mg high silicon aluminum alloy, J. Manuf. Process., 2021, 68: 657–667 Hou J. Li R. Xu C. Li T. Shi Z. A comparative study on microstructure and properties of pulsed laser welding and continuous laser welding of Al-25Si-4Cu-Mg high silicon aluminum alloy J. Manuf. Process. 2021 68 657 667 Search in Google Scholar

[8] Chai, D., Wu, D., Ma, G., Zhou, S., Jin, Z., Wu, D. The effects of pulse parameters on weld geometry and microstructure of a pulsed laser welding Ni-base alloy thin sheet with filler wire. Metals. 2016; 6(10): 237. Chai, D., Wu, D., Ma, G., Zhou, S., Jin, Z., Wu, D The effects of pulse parameters on weld geometry and microstructure of a pulsed laser welding Ni-base alloy thin sheet with filler wire Metals 2016 6 10 237 Search in Google Scholar

[9] Sheikhbahaee, H., Mirahmadi, S.J., Pakmanesh, M.R., Asghari, S., Investigating sensitivity to process parameters in pulsed laser micro-welding of stainless steel foils, Opt. Laser Technol., 2022, 148: 107737 Sheikhbahaee H. Mirahmadi S.J. Pakmanesh M.R. Asghari S. Investigating sensitivity to process parameters in pulsed laser micro-welding of stainless steel foils Opt. Laser Technol. 2022 148 107737 Search in Google Scholar

[10] Krolczyk, G., Sedmak, A., Kumar, U., Chattopadhyaya, S., Das, A.K., Pramanik, A., Study of heat-affected zone and mechanical properties of Nd-YAG laser welding process of thin titanium alloy sheet, Nat. Resour. Eng., 2016, 1(2): 51–58 Krolczyk G. Sedmak A. Kumar U. Chattopadhyaya S. Das A.K. Pramanik A. Study of heat-affected zone and mechanical properties of Nd-YAG laser welding process of thin titanium alloy sheet Nat. Resour. Eng. 2016 1 2 51 58 Search in Google Scholar

[11] Li, D., Han, Z., Zhao, P., Dong, Z., Zhao, S., Zhu, R., et al., Laser welding by focusing multi-laser beams, Opt. Express, 2024, 32(13): 23147–23160 Li D. Han Z. Zhao P. Dong Z. Zhao S. Zhu R. Laser welding by focusing multi-laser beams Opt. Express 2024 32 13 23147 23160 Search in Google Scholar

[12] Verhaeghe, G., Hilton, P., The effect of spot size and laser beam quality on welding performance when using high-power continuous wave solid-state lasers, In Proceedings of ICALEO 2005: 24th International Congress on Laser Materials Processing and Laser Microfabrication, AIP Publishing, Melville, NY, 2005 Verhaeghe G. Hilton P. The effect of spot size and laser beam quality on welding performance when using high-power continuous wave solid-state lasers In Proceedings of ICALEO 2005: 24th International Congress on Laser Materials Processing and Laser Microfabrication AIP Publishing Melville, NY 2005 Search in Google Scholar

[13] Saurabh, S.K., Chand, P., Yadav, U.S., Optimizing laser beam welding performance parameters on nimonic 80A superalloy: a study on experimentation, TGRA, and PCA, Soldag. Inspeção, 2024, 29: e2904. 10.1590/0104-9224/SI29.04 Saurabh S.K. Chand P. Yadav U.S. Optimizing laser beam welding performance parameters on nimonic 80A superalloy: a study on experimentation, TGRA, and PCA Soldag. Inspeção 2024 29 e2904 10.1590/0104-9224/SI29.04 Open DOI

[14] Voropaev, A., Stranko, M., Sorokin, A., Logachev, I., Kuznetsov, M., Laser welding of Inconel 718 nickel-based alloy layer-by-layer products, Mater. Today Proc., 2020, 30: 471–477. 10.1016/j.matpr.2019.12.032 Voropaev A. Stranko M. Sorokin A. Logachev I. Kuznetsov M. Laser welding of Inconel 718 nickel-based alloy layer-by-layer products Mater. Today Proc. 2020 30 471 477 10.1016/j.matpr.2019.12.032 Open DOI

[15] Sharif, S.M., Ramji, M., Akiyama, T., Saurabh, S.K., Ganesh, S., Petley, V.U., et al., A study on laser welding of Inconel 718 and evolution of strain field using digital image correlation to estimate the localized properties, Opt. Laser Technol., 2024, 164: 109472. 10.1016/j.optlastec.2024.109472 Sharif S.M. Ramji M. Akiyama T. Saurabh S.K. Ganesh S. Petley V.U. A study on laser welding of Inconel 718 and evolution of strain field using digital image correlation to estimate the localized properties Opt. Laser Technol. 2024 164 109472 10.1016/j.optlastec.2024.109472 Open DOI

[16] Uranga, G.U., Oiartzun, M.A., Cabello, M.J., Molpeceres, C., Morales, M., General methodology for laser welding finite element model calibration. Processes, 2024, 12(12): 2687. Uranga, G.U., Oiartzun, M.A., Cabello, M.J., Molpeceres, C., Morales, M. General methodology for laser welding finite element model calibration Processes 2024 12 12 2687 Search in Google Scholar

[17] Han, Q., Kim, D., Kim, D., Lee, H., Kim, N., Laser pulsed welding in thin sheets of Zircaloy-4, J. Mater. Process. Technol., 2012, 212(5): 1116–1122 Han Q. Kim D. Kim D. Lee H. Kim N. Laser pulsed welding in thin sheets of Zircaloy-4 J. Mater. Process. Technol. 2012 212 5 1116 1122 Search in Google Scholar

[18] Baruah, M., Bag, S., Influence of pulsation in thermo-mechanical analysis on laser micro-welding of Ti6Al4V alloy, Opt. Laser Technol., 2017, 90: 40–51 Baruah M. Bag S. Influence of pulsation in thermo-mechanical analysis on laser micro-welding of Ti₆Al₄V alloy Opt. Laser Technol. 2017 90 40 51 Search in Google Scholar

[19] Zhang, Y., Ying, Y., Liu, X., Wei, H., Deformation control during the laser welding of a Ti6Al4V thin plate using a synchronous gas cooling method, Mater. Des., 2016, 90: 931–941 Zhang Y. Ying Y. Liu X. Wei H. Deformation control during the laser welding of a Ti₆Al₄V thin plate using a synchronous gas cooling method Mater. Des. 2016 90 931 941 Search in Google Scholar

[20] Chen, J., Chang, Y., Wei, Y., Building ultra-thin Inconel 718 sheet joints using low-frequency PLBW scheme: Weld bead quality, keyhole dynamics, and solidification characteristics, J. Mater. Res. Technol., 2023, 27: 4145–4156 Chen J. Chang Y. Wei Y. Building ultra-thin Inconel 718 sheet joints using low-frequency PLBW scheme: Weld bead quality, keyhole dynamics, and solidification characteristics J. Mater. Res. Technol. 2023 27 4145 4156 Search in Google Scholar

[21] Li, L., Peng, G., Wang, J., Gong, J., Li, H., Experimental study on weld formation of Inconel 718 with fiber laser welding under reduced ambient pressure, Vacuum, 2018, 151: 140–147 Li L. Peng G. Wang J. Gong J. Li H. Experimental study on weld formation of Inconel 718 with fiber laser welding under reduced ambient pressure Vacuum 2018 151 140 147 Search in Google Scholar

[22] Zhu, W., Zhao, F., Yin, S., Liu, Y., Yang, R., Effect of tensile deformation on residual stress of GH4169 alloy, Materials, 2021, 14(7): 1773 Zhu W. Zhao F. Yin S. Liu Y. Yang R. Effect of tensile deformation on residual stress of GH4169 alloy Materials 2021 14 7 1773 Search in Google Scholar

[23] Wu, C.L., Yin, H., Huang, Z.H., Optimization of pulsed laser welding parameters for GH4169 nickel-based superalloy, Tool. Technol., 2020, 54(10): 38–42 (in Chinese) Wu C.L. Yin H. Huang Z.H. Optimization of pulsed laser welding parameters for GH4169 nickel-based superalloy Tool. Technol. 2020 54 10 38 42 (in Chinese) Search in Google Scholar

[24] Zhang, D., Wu, R., Zhang, H., Liu, Z., Numerical simulation of temperature field evolution in the process of laser metal deposition, Chin. J. Lasers, 2015, 42(5): 112–123 Zhang D. Wu R. Zhang H. Liu Z. Numerical simulation of temperature field evolution in the process of laser metal deposition Chin. J. Lasers 2015 42 5 112 123 Search in Google Scholar

[25] Ghosh, P.S., Sen, A., Chattopadhyaya, S., Sharma, S., Singh, J., Dwivedi, S.P., et al., Prediction of transient temperature distributions for laser welding of dissimilar metals, Appl. Sci., 2021, 11(13): 5829 Ghosh P.S. Sen A. Chattopadhyaya S. Sharma S. Singh J. Dwivedi S.P. Prediction of transient temperature distributions for laser welding of dissimilar metals Appl. Sci. 2021 11 13 5829 Search in Google Scholar

[26] Yang, Z., Li, W., Zhang, Y., Song M., Gao Q., Optimization and analysis of surface milling parameters of additive manufacturing maraging steel, Iron Steel., 2024, 59(6): 135–144. 10.13228/j.boyuan.issn0449-749x.20240091 Yang Z. Li W. Zhang Y. Song M. Gao Q. Optimization and analysis of surface milling parameters of additive manufacturing maraging steel Iron Steel 2024 59 6 135 144 10.13228/j.boyuan.issn0449-749x.20240091 Open DOI

[27] Cumming, G., Fidler, F., Vaux, D.L., Error bars in experimental biology, J. Cell Biol., 2004, 166(2): 247–251 Cumming G. Fidler F. Vaux D.L. Error bars in experimental biology J. Cell Biol. 2004 166 2 247 251 Search in Google Scholar

[28] Tzeng, Y., Parametric analysis of the pulsed Nd:YAG laser seam-welding process, J. Mater. Process. Technol., 2000, 102(1–3): 40–47 Tzeng Y. Parametric analysis of the pulsed Nd:YAG laser seam-welding process J. Mater. Process. Technol. 2000 102 1–3 40 47 Search in Google Scholar

[29] Liu, T., Mu, Z., Hu, R., Pang, S., Sinusoidal oscillating laser welding of 7075 aluminum alloy: hydrodynamics, porosity formation and optimization, Int. J. Heat. Mass. Transf., 2019, 140: 346–358 Liu T. Mu Z. Hu R. Pang S. Sinusoidal oscillating laser welding of 7075 aluminum alloy: hydrodynamics, porosity formation and optimization Int. J. Heat. Mass. Transf. 2019 140 346 358 Search in Google Scholar

[30] Yan, S, Zhu, Z, Ma, C, Qin, Q.H., Chen, H., Fu, Y.N., Porosity formation and its effect on the properties of hybrid laser welded Al alloy joints, Int. J. Adv. Manuf. Technol., 2019, 104: 2645–2656 Yan S Zhu Z Ma C Qin Q.H. Chen H. Fu Y.N. Porosity formation and its effect on the properties of hybrid laser welded Al alloy joints Int. J. Adv. Manuf. Technol. 2019 104 2645 2656 Search in Google Scholar

[31] Tadamalle, A.P., Reddy, Y.P., Ramjee, E., Influence of laser welding process parameters on weld pool geometry and duty cycle, Adv. Prod. Eng. Manag., 2013, 8(1): 52 Tadamalle A.P. Reddy Y.P. Ramjee E. Influence of laser welding process parameters on weld pool geometry and duty cycle Adv. Prod. Eng. Manag. 2013 8 1 52 Search in Google Scholar

[32] Stein, F., Leineweber, A., Laves phases: a review of their functional and structural applications and an improved fundamental understanding of stability and properties, J. Mater. Sci., 2021, 56(9): 5321–5427 Stein F. Leineweber A. Laves phases: a review of their functional and structural applications and an improved fundamental understanding of stability and properties J. Mater. Sci. 2021 56 9 5321 5427 Search in Google Scholar

[33] Wang, L, Cui, R, Li, B, Jia, X., Yao, L.H., Su, Y.Q., et al., Influence of laser parameters on segregation of Nb during selective laser melting of Inconel 718, China Foundry, 2021, 18: 379–388 Wang L Cui R Li B Jia X. Yao L.H. Su Y.Q. Influence of laser parameters on segregation of Nb during selective laser melting of Inconel 718 China Foundry 2021 18 379 388 Search in Google Scholar

[34] Artaza, T., Bhujangrao, T., Suárez, A., Veiga, F., Lamikiz, A., Influence of heat input on the formation of Laves phases and hot cracking in plasma arc welding (PAW) additive manufacturing of Inconel 718, Metals, 2020, 10(6): 771 Artaza T. Bhujangrao T. Suárez A. Veiga F. Lamikiz A. Influence of heat input on the formation of Laves phases and hot cracking in plasma arc welding (PAW) additive manufacturing of Inconel 718 Metals 2020 10 6 771 Search in Google Scholar

[35] Haisheng, Z., Lijia, F., Huan, L., Kaiqin, D., Effect of hot isostatic pressing on microstructure and high temperature properties of GH4169 alloy formed by selective laser melting, J. Aeronaut. Mater., 2024, 44(1): 44–50. (in Chinese) Haisheng Z. Lijia F. Huan L. Kaiqin D. Effect of hot isostatic pressing on microstructure and high temperature properties of GH4169 alloy formed by selective laser melting J. Aeronaut. Mater. 2024 44 1 44–50 (in Chinese) Search in Google Scholar

[36] Kontis, P., Chauvet, E., Peng, Z., He, J., da Silva, A.K., Raabe, D., et al., Atomic-scale grain boundary engineering to overcome hot-cracking in additively-manufactured superalloys, Acta Mater., 2019, 177: 209–221 Kontis P. Chauvet E. Peng Z. He J. da Silva A.K. Raabe D. Atomic-scale grain boundary engineering to overcome hot-cracking in additively-manufactured superalloys Acta Mater. 2019 177 209 221 Search in Google Scholar

[37] Sharma, S.K., Biswas, K., Nath, A.K., Manna, I., Majumdar, J.D., Microstructural change during laser welding of Inconel 718, Optik, 2020;218:165029 Sharma S.K. Biswas K. Nath A.K. Manna I. Majumdar J.D. Microstructural change during laser welding of Inconel 718 Optik 2020 218 165029 Search in Google Scholar

[38] Liang, R., Luo, Y., Study on weld pool behaviors and ripple formation in dissimilar welding under pulsed laser, Opt. Laser Technol., 2017, 93: 1–8 Liang R. Luo Y. Study on weld pool behaviors and ripple formation in dissimilar welding under pulsed laser Opt. Laser Technol. 2017 93 1 8 Search in Google Scholar