<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The purpose of the work was to determine the properties of the developed material (bitumen). In this study, the technological process was improved by modifying low-molecular weight butadiene and chloroprene rubbers structured with carbon nanotubes (CNTs) to obtain a material with the necessary set of desired properties. The article shows the possibility of modifying the bituminous binder of asphalt concrete with elastomeric rubbers structured with CNTs. The article also considers the use of promising polymer composite materials and the increase in their reliability and service life. Improvements in the properties of the composite and in the technology due to direct reinforcement with nanomaterials are described. The article defines the areas of application and recommended improvement of composite materials, as well as existing limitations.</p>
</abstract>

The purpose of the work was to determine the properties of the developed material (bitumen). In this study, the technological process was improved by modifying low-molecular weight butadiene and chloroprene rubbers structured with carbon nanotubes (CNTs) to obtain a material with the necessary set of desired properties. The article shows the possibility of modifying the bituminous binder of asphalt concrete with elastomeric rubbers structured with CNTs. The article also considers the use of promising polymer composite materials and the increase in their reliability and service life. Improvements in the properties of the composite and in the technology due to direct reinforcement with nanomaterials are described. The article defines the areas of application and recommended improvement of composite materials, as well as existing limitations.

Technology for improving modern polymer composite materials

Department of Computer Technologies of Construction and Reconstruction of Airports, Faculty of Architecture, Civil Engineering and Design

Institute of the Chemistry of High-Molecular Compounds

Materials Science-Poland

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

{"article-title":"Technology for improving modern polymer composite materials"}

The purpose of the work was to determine the properties of the developed material (bitumen). In this study, the technological process was improved by modifying...

Technology for improving modern polymer composite materials

Pubblicato online: 31 dic 2022

Pagine: 27 - 41

Ricevuto: 28 giu 2022

Accettato: 28 ott 2022

DOI: https://doi.org/10.2478/msp-2022-0027

Parole chiave
polymer, composite materials, production technology, bitumen, nanomaterials

© 2022 Shilin Yang et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Technology for improving modern polymer composite materials

Pubblicato online: 31 dic 2022

Pagine: 27 - 41

Ricevuto: 28 giu 2022

Accettato: 28 ott 2022

DOI: https://doi.org/10.2478/msp-2022-0027

Parole chiavepolymer, composite materials, production technology, bitumen, nanomaterials

© 2022 Shilin Yang et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Parole chiave
polymer, composite materials, production technology, bitumen, nanomaterials