Parameter optimization for wire-cut electrical discharge machining of stir cast AA6063 alloy/SiC (black and green) using Taguchi method with grey relational analysis
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Kutz M. Mechanical engineers’ handbook, volume 4: energy and power. John Wiley & Sons; United States of America, 2015.KutzMJohn Wiley & SonsUnited States of America2015Search in Google Scholar
Shi J, Wang Y. Development of metal matrix composites by laser-assisted additive manufacturing technologies: a review. J Mater Sci. 2020;55(23):9883–917. https://doi.org/10.1007/s10853-020-04730-3ShiJWangYDevelopment of metal matrix composites by laser-assisted additive manufacturing technologies: a review202055239883917https://doi.org/10.1007/s10853-020-04730-3Search in Google Scholar
Choudhary R, Kumar A, Raj H, Kumar S, Tiwari S, Khan S, et al. Fabrication and characterization of stir cast Al2024/SiCp metal matrix composite. Mater Today Proc. 2020; https://doi.org/10.1016/j.matpr.2020.02.471ChoudharyRKumarARajHKumarSTiwariSKhanSFabrication and characterization of stir cast Al2024/SiCp metal matrix composite2020https://doi.org/10.1016/j.matpr.2020.02.471Search in Google Scholar
Coyal A, Yuvaraj N, Butola R, Tyagi L. An experimental analysis of tensile, hardness and wear properties of aluminium metal matrix composite through stir casting process. SN Appl Sci. 2020;2:892. https://doi.org/10.1007/s42452-020-2657-8CoyalAYuvarajNButolaRTyagiLAn experimental analysis of tensile, hardness and wear properties of aluminium metal matrix composite through stir casting process20202892https://doi.org/10.1007/s42452-020-2657-8Search in Google Scholar
Adebisi A, Maleque M, Rahman MM. Metal matrix composite brake rotor: historical development and product life cycle analysis. Int J Automot Mech Eng. 2011;4(1):471–80.AdebisiAMalequeMRahmanMMMetal matrix composite brake rotor: historical development and product life cycle analysis2011414718010.15282/ijame.4.2011.8.0038Search in Google Scholar
Bae W, Kim S, Kim Y, Lee S-K. Suppression of machine tool spindle vibration by using TiC-SKH51 metal matrix composite. Compos Res. 2020;33(5):262–7. https://doi.org/10.7234/composres.2020.33.5.262BaeWKimSKimYLeeS-KSuppression of machine tool spindle vibration by using TiC-SKH51 metal matrix composite20203352627https://doi.org/10.7234/composres.2020.33.5.262Search in Google Scholar
Bawa M, Umaru O, Abur B, Salako I, Jatau J. Effect of locust bean pod ash on the hardness and wear rate of heat treated A356 alloy metal matrix composite for production of automobile brake rotor. Eng Technol. 2020;57(1):36–43. https://doi.org/10.47119/IJRP100571720201325BawaMUmaruOAburBSalakoIJatauJEffect of locust bean pod ash on the hardness and wear rate of heat treated A356 alloy metal matrix composite for production of automobile brake rotor20205713643https://doi.org/10.47119/IJRP100571720201325Search in Google Scholar
Mason CJT. Structure-property-process relations of solid-state additively manufactured aerospace aluminum alloys. University of Alabama Libraries; United States of America, 2020.MasonCJTUniversity of Alabama LibrariesUnited States of America202010.1016/j.addma.2021.101879Search in Google Scholar
Mallick PK. Materials, design and manufacturing for lightweight vehicles. Woodhead Publishing; United Kingdom, 2020.MallickPKWoodhead PublishingUnited Kingdom202010.1016/B978-0-12-818712-8.00008-2Search in Google Scholar
Hikku G, Jeyasubramanian K, Venugopal A, Ghosh R. Corrosion resistance behaviour of graphene/polyvinyl alcohol nanocomposite coating for aluminium-2219 alloy. J Alloys Compd. 2017;716:259–69. https://doi.org/10.1016/j.jallcom.2017.04.324HikkuGJeyasubramanianKVenugopalAGhoshRCorrosion resistance behaviour of graphene/polyvinyl alcohol nanocomposite coating for aluminium-2219 alloy201771625969https://doi.org/10.1016/j.jallcom.2017.04.324Search in Google Scholar
Nino A, Takahashi N, Sugiyama S, Taimatsu H. Effects of carbide grain growth inhibitors on the microstructures and mechanical properties of WC–SiC–Mo2C hard ceramics. Int J Refract Met Hard Mater. 2014;43:150–6. https://doi.org/10.1016/j.ijrmhm.2013.11.016NinoATakahashiNSugiyamaSTaimatsuHEffects of carbide grain growth inhibitors on the microstructures and mechanical properties of WC–SiC–Mo2C hard ceramics2014431506https://doi.org/10.1016/j.ijrmhm.2013.11.016Search in Google Scholar
Loto RT, Babalola P. Corrosion resistance of low SiC particle variation at low weight content on 1060 aluminum matrix composite in sulfate-contaminated sea-water. Results Phys. 2019;13:102241. https://doi.org/10.1016/j.rinp.2019.102241LotoRTBabalolaPCorrosion resistance of low SiC particle variation at low weight content on 1060 aluminum matrix composite in sulfate-contaminated sea-water201913102241. https://doi.org/10.1016/j.rinp.2019.102241Search in Google Scholar
Hu Q, Zhao H, Li F. Microstructures and properties of SiC particles reinforced aluminum-matrix composites fabricated by vacuum-assisted high pressure die casting. Mater Sci Eng A. 2017;680:270–7. https://doi.org/10.1016/j.msea.2016.10.090HuQZhaoHLiFMicrostructures and properties of SiC particles reinforced aluminum-matrix composites fabricated by vacuum-assisted high pressure die casting20176802707https://doi.org/10.1016/j.msea.2016.10.090Search in Google Scholar
Mousavian RT, Khosroshahi RA, Yazdani S, Brabazon D, Boostani A. Fabrication of aluminum matrix composites reinforced with nano-to micrometer-sized SiC particles. Mater Des. 2016;89:58–70. https://doi.org/10.1016/j.matdes.2015.09.130MousavianRTKhosroshahiRAYazdaniSBrabazonDBoostaniAFabrication of aluminum matrix composites reinforced with nano-to micrometer-sized SiC particles2016895870https://doi.org/10.1016/j.matdes.2015.09.130Search in Google Scholar
Fenghong C, Chang C, Zhenyu W, Muthuramalingam T, Anbuchezhiyan G. Effects of silicon carbide and tungsten carbide in aluminium metal matrix composites. Silicon. 2019;11(6):2625–32. https://doi.org/10.1007/s12633-018-0051-6FenghongCChangCZhenyuWMuthuramalingamTAnbuchezhiyanGEffects of silicon carbide and tungsten carbide in aluminium metal matrix composites2019116262532https://doi.org/10.1007/s12633-018-0051-6Search in Google Scholar
Ortega-Celaya F, Pech-Canul M, López-Cuevas J, Rendón-Ángeles J, Pech-Canul M. Microstructure and impact behavior of Al/SiCp composites fabricated by pressureless infiltration with different types of SiCp. J Mater Process Technol. 2007;183(2–3):368–73. https://doi.org/10.1016/j.jmatprotec.2006.10.029Ortega-CelayaFPech-CanulMLópez-CuevasJRendón-ÁngelesJPech-CanulMMicrostructure and impact behavior of Al/SiCp composites fabricated by pressureless infiltration with different types of SiCp20071832–336873https://doi.org/10.1016/j.jmatprotec.2006.10.029Search in Google Scholar
Rojas JI, Siva BV, Sahoo KL, Crespo D. Viscoelastic behavior of a novel aluminum metal matrix composite and comparison with pure aluminum, aluminum alloys, and a composite made of Al–Mg–Si alloy reinforced with SiC particles. J Alloys Compd. 2018;744:445–52. https://doi.org/10.1016/j.jallcom.2018.02.103RojasJISivaBVSahooKLCrespoDViscoelastic behavior of a novel aluminum metal matrix composite and comparison with pure aluminum, aluminum alloys, and a composite made of Al–Mg–Si alloy reinforced with SiC particles201874444552https://doi.org/10.1016/j.jallcom.2018.02.103Search in Google Scholar
Dongre G, Zaware S, Dabade U, Joshi SS. Multi-objective optimization for silicon wafer slicing using wire-EDM process. Mater Sci Semicond Process. 2015;39:793–806. https://doi.org/10.1016/j.mssp.2015.06.050DongreGZawareSDabadeUJoshiSSMulti-objective optimization for silicon wafer slicing using wire-EDM process201539793806https://doi.org/10.1016/j.mssp.2015.06.050Search in Google Scholar
Vijayabhaskar S, Rajmohan T, Pranay Sisir T, Phani Abishek J, Mohankrishna Reddy R, editors. Review of WEDM studies on metal matrix composites. IOP Conference Series Materials Science Engineering, The 3rd International Conference on Materials and Manufacturing Engineering 2018 8–9 March 2018, Tamilnadu, India; 2018. https://doi.org/10.1088/1757-899X/390/1/012051VijayabhaskarSRajmohanTPranay SisirTPhani AbishekJMohankrishna ReddyReditors.IOP Conference Series Materials Science Engineering, The 3rd International Conference on Materials and Manufacturing Engineering 20188–9 March 2018Tamilnadu, India2018https://doi.org/10.1088/1757-899X/390/1/012051Search in Google Scholar
Bilal A, Jahan MP, Talamona D, Perveen A. Electro-discharge machining of ceramics: a review. Micromachines. 2019;10(1):10. https://doi.org/10.3390/mi10010010BilalAJahanMPTalamonaDPerveenAElectro-discharge machining of ceramics: a review201910110https://doi.org/10.3390/mi10010010635649230585198Search in Google Scholar
Shandilya P, Jain P, Jain N. Wire electric discharge machining of metal matrix composite materials. DAAAM Int Sci Book. 2011:383–401.ShandilyaPJainPJainNWire electric discharge machining of metal matrix composite materials201138340110.2507/daaam.scibook.2011.30Search in Google Scholar
Nguyen PH, Banh TL, Mashood KA, Tran DQ, Muthuramalingam T, Nguyen DT. Application of TGRA-based optimisation for machinability of high-chromium tool steel in the EDM process. Arab J Sci Eng. 2020;45(7):5555–62. https://doi.org/10.1007/s13369-020-04456-zNguyenPHBanhTLMashoodKATranDQMuthuramalingamTNguyenDTApplication of TGRA-based optimisation for machinability of high-chromium tool steel in the EDM process2020457555562https://doi.org/10.1007/s13369-020-04456-zSearch in Google Scholar
Selvakumar G, Sornalatha G, Sarkar S, Mitra S. Experimental investigation and multi-objective optimization of wire electrical discharge machining (WEDM) of 5083 aluminum alloy. Trans Nonferrous Met Soc China. 2014;24(2):373–9. https://doi.org/10.1016/S1003-6326(14)63071-5SelvakumarGSornalathaGSarkarSMitraSExperimental investigation and multi-objective optimization of wire electrical discharge machining (WEDM) of 5083 aluminum alloy20142423739https://doi.org/10.1016/S1003-6326(14)63071-5Search in Google Scholar
Mandal K, Sarkar S, Mitra S, Bose D. Parametric analysis and GRA approach in WEDM of Al 7075 alloy. Mater Today Proc. 2020;26:660–4. https://doi.org/10.1016/j.matpr.2019.12.361MandalKSarkarSMitraSBoseDParametric analysis and GRA approach in WEDM of Al 7075 alloy2020266604https://doi.org/10.1016/j.matpr.2019.12.361Search in Google Scholar
Ramu I, Srinivas P, Vekatesh K, editors. Taguchi based grey relational analysis for optimization of machining parameters of CNC turning steel 316. International Conference on Mechanical, Materials and Renewable Energy; 2018. https://doi.org/10.1088/1757-899X/377/1/012078RamuISrinivasPVekateshKeditors.International Conference on Mechanical, Materials and Renewable Energy2018https://doi.org/10.1088/1757-899X/377/1/012078Search in Google Scholar
Sarraf F, Nejad SH. Improving performance evaluation based on balanced scorecard with grey relational analysis and data envelopment analysis approaches: case study in water and wastewater companies. Eval Program Plann. 2020;79:101762. https://doi.org/10.1016/j.evalprogplan.2019.101762SarrafFNejadSHImproving performance evaluation based on balanced scorecard with grey relational analysis and data envelopment analysis approaches: case study in water and wastewater companies202079101762. https://doi.org/10.1016/j.evalprogplan.2019.10176231835153Search in Google Scholar
Yue G, Lu X, Zhu Y, Zhang X, Zhang S. Surface morphology, crystal structure and orientation of aluminium coatings electrodeposited on mild steel in ionic liquid. Chem Eng J. 2009;147(1):79–86. https://doi.org/10.1016/j.cej.2008.11.044YueGLuXZhuYZhangXZhangSSurface morphology, crystal structure and orientation of aluminium coatings electrodeposited on mild steel in ionic liquid200914717986https://doi.org/10.1016/j.cej.2008.11.044Search in Google Scholar
Pramanik D, Kuar A, Bose D. Effects of wire EDM machining variables on material removal rate and surface roughness of Al 6061 alloy. Renew Energ Innov Technol 2019231–41. https://doi.org/10.1007/978-981-13-2116-0_19PramanikDKuarABoseDEffects of wire EDM machining variables on material removal rate and surface roughness of Al 6061 alloy201923141https://doi.org/10.1007/978-981-13-2116-0_19Search in Google Scholar
Kapoor J, Khamba JS, Singh S. The effect of machining parameters on surface roughness and material removal rate with cryogenic treated wire in WEDM. Int J Mach Mach Mater. 2012;12(1–2):126–41. https://doi.org/10.1016/j.matdes.2010.01.013KapoorJKhambaJSSinghSThe effect of machining parameters on surface roughness and material removal rate with cryogenic treated wire in WEDM2012121–212641https://doi.org/10.1016/j.matdes.2010.01.013Search in Google Scholar
Azam M, Jahanzaib M, Abbasi JA, Abbas M, Wasim A, Hussain S. Parametric analysis of recast layer formation in wire-cut EDM of HSLA steel. Int J Adv Manuf Technol. 2016;87(1):713–22. https://doi.org/10.1007/s00170-016-8518-3AzamMJahanzaibMAbbasiJAAbbasMWasimAHussainSParametric analysis of recast layer formation in wire-cut EDM of HSLA steel201687171322https://doi.org/10.1007/s00170-016-8518-3Search in Google Scholar
Tanjilul M, Ahmed A, Kumar AS, Rahman M. A study on EDM debris particle size and flushing mechanism for efficient debris removal in EDM-drilling of Inconel 718. J Mater Process Technol. 2018;255:263–74. https://doi.org/10.1016/j.jmatprotec.2017.12.016TanjilulMAhmedAKumarASRahmanMA study on EDM debris particle size and flushing mechanism for efficient debris removal in EDM-drilling of Inconel 718201825526374https://doi.org/10.1016/j.jmatprotec.2017.12.016Search in Google Scholar