<abstract xmlns="http://www.w3.org/1999/xhtml">This study investigates microstructures and mechanical properties of the alloys obtained by adding Cu (0.7 % and 0.9 %) and Al (0.7 % and 0.9 %) to lead-free Sn-9Zn eutectic soldering alloy produced by investment casting method. The results show that Cu5Zn8 phase has formed in the structure of Cu added alloys and the Al2O3 phase has formed due to addition of Al. It was found that small and round-shaped Al2O3 phase increased the tensile strength of the new alloy compared to the eutectic alloy. In addition, it was observed that the microhardness of Cu added alloys was lower than that of Sn-9Zn eutectic alloy, but the microhardness of alloys containing Al was higher compared to the other eutectic Sn-9Zn alloy.</abstract>

This study investigates microstructures and mechanical properties of the alloys obtained by adding Cu (0.7 % and 0.9 %) and Al (0.7 % and 0.9 %) to lead-free Sn-9Zn eutectic soldering alloy produced by investment casting method. The results show that Cu5Zn8 phase has formed in the structure of Cu added alloys and the Al2O3 phase has formed due to addition of Al. It was found that small and round-shaped Al2O3 phase increased the tensile strength of the new alloy compared to the eutectic alloy. In addition, it was observed that the microhardness of Cu added alloys was lower than that of Sn-9Zn eutectic alloy, but the microhardness of alloys containing Al was higher compared to the other eutectic Sn-9Zn alloy.

Microstructure and mechanical properties of Sn-9Zn-xAl and Sn-9Zn-xCu lead-free solder alloys

Materials Science-Poland

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

This study investigates microstructures and mechanical properties of the alloys obtained by adding Cu (0.7 % and 0.9 %) and Al (0.7 % and 0.9 %) to lead-free...

Microstructure and mechanical properties of Sn-9Zn-xAl and Sn-9Zn-xCu lead-free solder alloys

Pubblicato online: 08 mag 2020

Pagine: 34 - 40

Ricevuto: 04 mag 2017

Accettato: 23 apr 2019

DOI: https://doi.org/10.2478/msp-2020-0025

Parole chiave
Sn-Zn lead-free alloys, investment casting, mechanical properties

© 2020 B. Yavuzer et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Microstructure and mechanical properties of Sn-9Zn-xAl and Sn-9Zn-xCu lead-free solder alloys

Pubblicato online: 08 mag 2020

Pagine: 34 - 40

Ricevuto: 04 mag 2017

Accettato: 23 apr 2019

DOI: https://doi.org/10.2478/msp-2020-0025

Parole chiaveSn-Zn lead-free alloys, investment casting, mechanical properties

© 2020 B. Yavuzer et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Parole chiave
Sn-Zn lead-free alloys, investment casting, mechanical properties