<abstract xmlns="http://www.w3.org/1999/xhtml"><p> The electrical energy consumption of battery-operated screwdrivers, which are widely used in many industries, e.g. automotive, heavy, chemical, etc., can be considerably reduced. This would allow increasing the service life of a battery and reducing the time of its charging, thus increasing the productivity and decreasing the prime cost of this battery. It is shown that up to 17.9% of electrical energy could be saved at assembling fixed threaded joints by removing power from the screwdriver immediately after reaching the required tightening torque.</p></abstract>

The electrical energy consumption of battery-operated screwdrivers, which are widely used in many industries, e.g. automotive, heavy, chemical, etc., can be considerably reduced. This would allow increasing the service life of a battery and reducing the time of its charging, thus increasing the productivity and decreasing the prime cost of this battery. It is shown that up to 17.9% of electrical energy could be saved at assembling fixed threaded joints by removing power from the screwdriver immediately after reaching the required tightening torque.

Energy Consumption of Battery-Operated Screwdriver at Assembling Fixed Threaded Joints / Akumulatora Skrūvgrieža Elektroenerģijas Patēriņa Aprēķins, Veicot Nekustīga Vītņu Savienojuma Salikšanu Atkarībā No Operatora Reakcijas Laika

Daugavpils Branch of the Riga Technical University 90 Smilshu Str., Daugavpils, LV-5410, LATVIA

the Riga Technical University 6 Ezermalas Str., Riga, LV-1006, LATVIA

Latvian Journal of Physics and Technical Sciences

The electrical energy consumption of battery-operated screwdrivers, which are widely used in many industries, e.g. automotive, heavy, chemical, etc., can be...

Energy Consumption of Battery-Operated Screwdriver at Assembling Fixed Threaded Joints / Akumulatora Skrūvgrieža Elektroenerģijas Patēriņa Aprēķins, Veicot Nekustīga Vītņu Savienojuma Salikšanu Atkarībā No Operatora Reakcijas Laika

Pubblicato online: 17 nov 2013

Pagine: 74 - 80

DOI: https://doi.org/10.2478/lpts-2013-0035

This content is open access.