<abstract xmlns="http://www.w3.org/1999/xhtml"><p> Introduction of new advanced electrical connections into a transmission grid reduces the capacity of existing overhead lines (OHLs). At the same time, designing &amp; building of new OHLs and substations involves considerable technical, environmental and economical problems. The authors propose a concept of the multi-objective optimization for selection of transmission line routes, towers (their type, placement and geometry), of conductors, insulators, dampers, earthing and lightning protection systems, span lengths, etc.. The optimization is organized in five stages. At the first and second stages a search for optimum solutions is performed along with determination of the main impacting factors. The next two stages present a two-objective optimization based on Pareto’s approach. At the last stage (exemplified by a case study), the probability of the restriction removal conditions is assessed, and preventive measures are identified. The presented approach uses a real line design and is intended for minimizing the total invested capital and maximizing the net present value. In the framework of this approach 20 alternatives have been elaborated, which can successfully be applied in the cases described in the paper.</p></abstract>

Introduction of new advanced electrical connections into a transmission grid reduces the capacity of existing overhead lines (OHLs). At the same time, designing & building of new OHLs and substations involves considerable technical, environmental and economical problems. The authors propose a concept of the multi-objective optimization for selection of transmission line routes, towers (their type, placement and geometry), of conductors, insulators, dampers, earthing and lightning protection systems, span lengths, etc.. The optimization is organized in five stages. At the first and second stages a search for optimum solutions is performed along with determination of the main impacting factors. The next two stages present a two-objective optimization based on Pareto’s approach. At the last stage (exemplified by a case study), the probability of the restriction removal conditions is assessed, and preventive measures are identified. The presented approach uses a real line design and is intended for minimizing the total invested capital and maximizing the net present value. In the framework of this approach 20 alternatives have been elaborated, which can successfully be applied in the cases described in the paper.

Multi-Objective Optimization of Transmission Lines / Elektropārvades Līnijas Daudzkriteriālā Optimizācija

Riga Technical University, Institute of Power Engineering, 1 Kronvalda Blvd., Riga, LATVIA

Vattenfall Research and Development, Vattenfall AB, 169 92, Stockholm, SWEDEN

Latvian Journal of Physics and Technical Sciences

Introduction of new advanced electrical connections into a transmission grid reduces the capacity of existing overhead lines (OHLs). At the same time,...

Multi-Objective Optimization of Transmission Lines / Elektropārvades Līnijas Daudzkriteriālā Optimizācija

Pubblicato online: 17 nov 2013

Pagine: 54 - 67

DOI: https://doi.org/10.2478/lpts-2013-0033

This content is open access.