<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>This study presents the crucial parts of the final construction of a combined temperature meter with wireless transmission of temperature data. The wireless transmission of temperature information is realized by optical coupling between the photodiode and the phototransistor through the air, not through an optical fibre. The power source is structurally unique in that its output terminals have mechanical freedom and thus the possibility to rotate without using mechanical contacts. Transmission of the supply energy is mediated by the magnetic field in a pot core transformer. A linear symmetrical post-regulator stabilizing the output voltage and ensuring the symmetry of the output voltages is included at the output of the source.</p>
</abstract>

This study presents the crucial parts of the final construction of a combined temperature meter with wireless transmission of temperature data. The wireless transmission of temperature information is realized by optical coupling between the photodiode and the phototransistor through the air, not through an optical fibre. The power source is structurally unique in that its output terminals have mechanical freedom and thus the possibility to rotate without using mechanical contacts. Transmission of the supply energy is mediated by the magnetic field in a pot core transformer. A linear symmetrical post-regulator stabilizing the output voltage and ensuring the symmetry of the output voltages is included at the output of the source.

Construction and characteristics of a thermometer in a hot filament CVD reactor for synthesis of nanocomposites based on carbon nanotubes

Slovak University of Technology in Bratislava

Journal of Electrical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

This study presents the crucial parts of the final construction of a combined temperature meter with wireless transmission of temperature data. The wireless...

Construction and characteristics of a thermometer in a hot filament CVD reactor for synthesis of nanocomposites based on carbon nanotubes

Pubblicato online: 08 giu 2024

Pagine: 249 - 252

Ricevuto: 01 feb 2024

DOI: https://doi.org/10.2478/jee-2024-0030

Parole chiave
chemical vapour deposition, nanocomposites, carbon nanotubes, switched mode power supply, pot core transformer

© 2024 Magdaléna Kadlečíková et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Construction and characteristics of a thermometer in a hot filament CVD reactor for synthesis of nanocomposites based on carbon nanotubes

Pubblicato online: 08 giu 2024

Pagine: 249 - 252

Ricevuto: 01 feb 2024

DOI: https://doi.org/10.2478/jee-2024-0030

Parole chiavechemical vapour deposition, nanocomposites, carbon nanotubes, switched mode power supply, pot core transformer

© 2024 Magdaléna Kadlečíková et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Parole chiave
chemical vapour deposition, nanocomposites, carbon nanotubes, switched mode power supply, pot core transformer