<abstract xmlns="http://www.w3.org/1999/xhtml"><p>In order to improvement of the performances for wind energy conversions systems (WECS), an advanced control techniques must be used. In this paper, as an alternative to conventional PI-type control methods, a nonlinear predictive control (NPC) approach is developed for DFIG-based wind turbine. To enhance the robustness of the controller, a disturbance observer is designed to estimate the aerodynamic torque which is considered as an unknown perturbation. An explicitly analytical form of the optimal predictive controller is given consequently on-line optimization is not necessary The DFIG is fed through the rotor windings by a back-to-back converter controlled by Pulse Width Modulation (PWM), where the stator winding is directly connected to the grid. The presented simulation results show a good performance in trajectory tracking of the proposed strategy and rejection of disturbances is successfully achieved.</p></abstract>

In order to improvement of the performances for wind energy conversions systems (WECS), an advanced control techniques must be used. In this paper, as an alternative to conventional PI-type control methods, a nonlinear predictive control (NPC) approach is developed for DFIG-based wind turbine. To enhance the robustness of the controller, a disturbance observer is designed to estimate the aerodynamic torque which is considered as an unknown perturbation. An explicitly analytical form of the optimal predictive controller is given consequently on-line optimization is not necessary The DFIG is fed through the rotor windings by a back-to-back converter controlled by Pulse Width Modulation (PWM), where the stator winding is directly connected to the grid. The presented simulation results show a good performance in trajectory tracking of the proposed strategy and rejection of disturbances is successfully achieved.

Nonlinear Predictive Control of Wind Energy Conversion System Using Dfig with Aerodynamic Torque Observer

Laboratory LTII, University of Bejaia, Algeria

Laboratory LICOME, University of Quebec at Chicoutimi, Canada

Journal of Electrical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

In order to improvement of the performances for wind energy conversions systems (WECS), an advanced control techniques must be used. In this paper, as an...

Nonlinear Predictive Control of Wind Energy Conversion System Using Dfig with Aerodynamic Torque Observer

Pubblicato online: 31 gen 2015

Pagine: 333 - 341

Ricevuto: 11 mag 2013

DOI: https://doi.org/10.2478/jee-2014-0055

© 2015 Faculty of Electrical Engineering and Information Technology, Slovak University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.