<abstract xmlns="http://www.w3.org/1999/xhtml"><p> This paper provides analysis of losses in the hysteresis-driven three-phase power converter with IGBTs and free-wheeling diodes. The converter under consideration is part of the self-excited induction generator (SEIG) vector control system. For the analysis, the SEIG vector control system is used in which the induction generator iron losses are taken into account. The power converter losses are determined by using a suitable loss estimation algorithm reported in literature. The chosen algorithm allows the power converter losses to be determined both by type (switching/conduction losses) and by converter component (IGBT/diode losses). The overall power converter losses are determined over wide ranges of rotor speed, dc-link voltage and load resistance, and subsequently used for offline correction of the overall control system’s losses (efficiency) obtained through control system simulations with an ideal power converter. The control system’s efficiency values obtained after the correction are compared with the measured values.</p></abstract>

This paper provides analysis of losses in the hysteresis-driven three-phase power converter with IGBTs and free-wheeling diodes. The converter under consideration is part of the self-excited induction generator (SEIG) vector control system. For the analysis, the SEIG vector control system is used in which the induction generator iron losses are taken into account. The power converter losses are determined by using a suitable loss estimation algorithm reported in literature. The chosen algorithm allows the power converter losses to be determined both by type (switching/conduction losses) and by converter component (IGBT/diode losses). The overall power converter losses are determined over wide ranges of rotor speed, dc-link voltage and load resistance, and subsequently used for offline correction of the overall control system’s losses (efficiency) obtained through control system simulations with an ideal power converter. The control system’s efficiency values obtained after the correction are compared with the measured values.

Analysis of Power Converter Losses in Vector Control System of a Self–Excited Induction Generator

University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture R. Boškovića 32, 21000 Split, Croatia

Journal of Electrical Engineering

This article is distributed under the terms of the Creative Commons Attribution Non-Commercial License, which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

This paper provides analysis of losses in the hysteresis-driven three-phase power converter with IGBTs and free-wheeling diodes. The converter under...

Analysis of Power Converter Losses in Vector Control System of a Self–Excited Induction Generator

Pubblicato online: 23 apr 2014

Pagine: 65 - 74

DOI: https://doi.org/10.2478/jee-2014-0010

Parole chiave
self-excited induction generator, vector control, converter losses, hysteresis switching, efficiency

© Faculty of Electrical Engineering and Information Technology, Slovak University of Technology

This article is distributed under the terms of the Creative Commons Attribution Non-Commercial License, which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Analysis of Power Converter Losses in Vector Control System of a Self–Excited Induction Generator

Pubblicato online: 23 apr 2014

Pagine: 65 - 74

DOI: https://doi.org/10.2478/jee-2014-0010

Parole chiaveself-excited induction generator, vector control, converter losses, hysteresis switching, efficiency

© Faculty of Electrical Engineering and Information Technology, Slovak University of Technology

This article is distributed under the terms of the Creative Commons Attribution Non-Commercial License, which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Parole chiave
self-excited induction generator, vector control, converter losses, hysteresis switching, efficiency