<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The joints of bars composed of flanges and high-strength bolts are currently used in steel structures as simple and economical construction solutions. This paper presents some theoretical aspects regarding the behavior and calculation of joints with flanges and partially pre-tensioned bolts. The overloading of the pretensioned high-strength bolts produced by the tensile effort resulting from the external actions is usually neglected in the technical materials and in the design norms for constructions, as long this tensioning effort does not exceed the pretensioning force of the high-strength bolts. The overloading effort of the bolts can be evaluated theoretically by estimating the relative stiffness of the flanges and bolts and confirmed through experimental tests and computer simulations. This paper also theoretically and computationally analyzes a joint for a tensioned bar made up of pre-stressed high-strength bolts and end flanges.</p>
</abstract>

The joints of bars composed of flanges and high-strength bolts are currently used in steel structures as simple and economical construction solutions. This paper presents some theoretical aspects regarding the behavior and calculation of joints with flanges and partially pre-tensioned bolts. The overloading of the pretensioned high-strength bolts produced by the tensile effort resulting from the external actions is usually neglected in the technical materials and in the design norms for constructions, as long this tensioning effort does not exceed the pretensioning force of the high-strength bolts. The overloading effort of the bolts can be evaluated theoretically by estimating the relative stiffness of the flanges and bolts and confirmed through experimental tests and computer simulations. This paper also theoretically and computationally analyzes a joint for a tensioned bar made up of pre-stressed high-strength bolts and end flanges.

Effect of Bolts Overloading in Flange-Type Joints

Technical University of Cluj-Napoca, Faculty of Civil Engineering

Journal of Applied Engineering Sciences

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

{"article-title":"Effect of Bolts Overloading in Flange-Type Joints"}

The joints of bars composed of flanges and high-strength bolts are currently used in steel structures as simple and economical construction solutions. This...

Effect of Bolts Overloading in Flange-Type Joints

Pubblicato online: 20 mag 2024

Pagine: 65 - 70

Ricevuto: 09 mag 2023

Accettato: 06 giu 2023

DOI: https://doi.org/10.2478/jaes-2024-0008

Parole chiave
flange type connections, partially prestressed bolts, relative stiffness of plate and bolts, prying action, overloading efforts, computer simulation

© 2024 I. Chindriș et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Effect of Bolts Overloading in Flange-Type Joints

Pubblicato online: 20 mag 2024

Pagine: 65 - 70

Ricevuto: 09 mag 2023

Accettato: 06 giu 2023

DOI: https://doi.org/10.2478/jaes-2024-0008

Parole chiaveflange type connections, partially prestressed bolts, relative stiffness of plate and bolts, prying action, overloading efforts, computer simulation

© 2024 I. Chindriș et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Parole chiave
flange type connections, partially prestressed bolts, relative stiffness of plate and bolts, prying action, overloading efforts, computer simulation