[
AASHTO, Transportation Officials. AASHTO Guide for Design of Pavement Structures, 1993. Vol. 1. Aashto, 1993.
]Search in Google Scholar
[
Al-Qadi, Imad L., Thomas L. Brandon, Richard J. Valentine, Bruce A. Lacina, and Timothy E. Smith. “Laboratory evaluation of geosynthetic-reinforced pavement sections.” Transportation research record 1439 (1994): 25-31.
]Search in Google Scholar
[
Barenberg, Ernest J., James H. Dowland, and John H. Hales. Evaluation of soil-aggregate systems with Mirafi fabric. University of Illinois at Urbana-Champaign, 1975.
]Search in Google Scholar
[
Baadiga, Ramu, Sireesh Saride, Umashankar Balunaini, and Madhav R. Madhira. “Influence of tensile strength of geogrid and subgrade modulus on layer coefficients of granular bases.” Transportation Geotechnics 29 (2021): 100557.
]Search in Google Scholar
[
Barksdale, Richard D., Stephen F. Brown, and Francis Chan. Potential benefits of geosynthetics in flexible pavement systems. No. 315. 1989.
]Search in Google Scholar
[
Burmister, Donald M. “Evaluation of pavement systems of the WASHO road test by layered system methods.” Highway Research Board Bulletin 177 (1958).
]Search in Google Scholar
[
Christopher, B. R., and R. D. Holtz. “Geotextiles for subgrade stabilization in permanent roads and highways.” In Geosynthetics, Conference, 1991, Atlanta, Georgia, USA, vol. 2. 1991.
]Search in Google Scholar
[
Collin, J. G., T. C. Kinney, and X. Fu. “Full scale highway load test of flexible pavement systems with geogrid reinforced base courses.” Geosynthetics International 3, no. 4 (1996): 537-549.
]Search in Google Scholar
[
Cuelho, Eli V., and Steve W. Perkins. “Geosynthetic subgrade stabilization–Field testing and design method calibration.” Transportation Geotechnics 10 (2017): 22-34.
]Search in Google Scholar
[
Jayalakshmi Dheiveekan, and S. S. Bhosale. “Laboratory investigation to identify subgrade soil in Maharashtra to satisfy reinforcement need for pavement design.” Materials Today: Proceedings 85 (2023): 127-133.
]Search in Google Scholar
[
Dondi, G. “Three-dimensional finite element analysis of a reinforced paved road.” In Proceedings of the fifth international conference on geotextiles, geomembranes and related products, vol. 1, pp. 95-100. 1994.
]Search in Google Scholar
[
Giroud, Jean-Pierre, and Laure Noiray. “Geotextile-reinforced unpaved road design.” Journal of the Geotechnical Engineering Division 107, no. 9 (1981): 1233-1254.
]Search in Google Scholar
[
Giroud, Jean Pierre, and Jie Han. “Design method for geogrid-reinforced unpaved roads. I. Development of design method.” Journal of Geotechnical and Geoenvironmental Engineering 130, no. 8 (2004): 775-786.
]Search in Google Scholar
[
Giroud, J. P., and Jie Han. “Design method for geogrid-reinforced unpaved roads. II. Calibration and applications.” Journal of Geotechnical and Geoenvironmental Engineering 130, no. 8 (2004): 787-797.
]Search in Google Scholar
[
Giroud, J. P., C. Ah-Line, and R. Bonaparte. “Design Of Unpaved Roads And Trafficked Areas With Geogrids. Polymer Grid Reinforcement: Proceedings Of A Conference Sponsored By The Science And Engineering Research Council And Netlon Ltd And Held In London 22-23 March 1984.” Publication of: Telford (Thomas) Limited (1985).
]Search in Google Scholar
[
Haas, Ralph, Jamie Walls, and R. G. Carroll. “Geogrid reinforcement of granular bases in flexible pavements.” Transportation research record 1188, no. 1 (1988): 19-27.
]Search in Google Scholar
[
Hammit, “Thickness requirements for unsurfaced roads and airfield bare base support,” Technical Report S-70-5, US Army Engineers, Waterways Experiment Station, Vicksburg, Miss, 1970.
]Search in Google Scholar
[
Hufenus, Rudolf, Rudolf Rueegger, Robert Banjac, Pierre Mayor, Sarah M. Springman, and Rolf Brönnimann. “Full-scale field tests on geosynthetic reinforced unpaved roads on soft subgrade.” Geotextiles and Geomembranes 24, no. 1 (2006): 21-37.
]Search in Google Scholar
[
Ingle, G. S., and S. S. Bhosale. “Full-scale laboratory accelerated test on geotextile reinforced unpaved road.” International Journal of Geosynthetics and Ground Engineering 3 (2017): 1-11.
]Search in Google Scholar
[
IRC (Indian Roads Congress): SP (Special Publication): 72, 2015. “Guidelines for the design of flexible pavements for low volume rural roads,” Indian Road Congress, New Delhi.
]Search in Google Scholar
[
IRC (Indian Road Congress): 37, 2012. Guidelines for the design of flexible pavements, Third revision, Indian Road Congress, New Delhi.
]Search in Google Scholar
[
IRC SP 77-2008 “Manual For Design Construction & Maintenance of Gravel Roads Indian Roads Congress 2008.”
]Search in Google Scholar
[
IRC (Indian Road Congress): 37, 1984. “Guidelines for the design of flexible pavements.” First revision, Indian Road Congress, New Delhi.
]Search in Google Scholar
[
Jayalakshmi, D., and S. Bhosale. “Geosynthetic Reinforced Unpaved Road: Literature Study and Design Example.” International Journal of Urban and Civil Engineering 15, no. 3 (2021): 142-147.
]Search in Google Scholar
[
Milligan, G. W. E., R. A. Jewell, G. T. Houlsby, and H. J. Burd. “A NEW APPROACH TO THE DESIGN OF UNPAVED ROADS--PART 1.” Ground Engineering 22, no. 3 (1989).
]Search in Google Scholar
[
Milligan, G. W. E., R. J. Fannin, and D. M. Farrar. “Model and full-scale tests of granular layers reinforced with a geogrid.” In Proceedings of third international conference on geotextiles, vol. 1, pp. 61-66. 1986.
]Search in Google Scholar
[
Perkins, S. W., B. R. Christopher, B. A. Lacina, and J. Klompmaker. “Mechanistic-empirical modeling of geosynthetic-reinforced unpaved roads.” International Journal of Geomechanics 12, no. 4 (2012): 370-380.
]Search in Google Scholar
[
Sellmeijer, J. B., C. J. Kenter, and C. Van den Berg. “Calculation method for fabric reinforced road.” In Proc. Second Int. Conf. on Geotextiles, vol. 2, pp. 393-8. Industrial Fabrics Association International St. Paul, MN, USA, 1982.
]Search in Google Scholar
[
Sellmeijer, J. B., and C. J. Kenter. “Increase in bearing capacity due to the application of Geolon fabric below granular base of road.” Delft Soil Mechanics Laboratory, Delft (1983).
]Search in Google Scholar
[
Singh, Meenakshi, Ashutosh Trivedi, and Sanjay Kumar Shukla. “Influence of geosynthetic reinforcement on unpaved roads based on CBR, and static and dynamic cone penetration tests.” International Journal of Geosynthetics and Ground Engineering 6, no. 2 (2020): 13.
]Search in Google Scholar
[
Singh, Meenakshi, Ashutosh Trivedi, and Sanjay Kumar Shukla. “Unpaved test sections reinforced with geotextile and geogrid.” Materials Today: Proceedings 32 (2020): 706-711.
]Search in Google Scholar
[
Tingle, Jeb S., and Sarah R. Jersey. “Empirical design methods for geosynthetic-reinforced low-volume roads.” Transportation research record 1989, no. 1 (2007): 91-101.
]Search in Google Scholar
[
Tingle, Jeb S., and Steve L. Webster. “Corps of Engineers Design of Geosynthetic-Reinforced Unpawed Roads.” Transportation research record 1849, no. 1 (2003): 193-201.
]Search in Google Scholar