<abstract xmlns="http://www.w3.org/1999/xhtml"><p> The lime tree is one of the rare and valuable species that found in the Hyrcanian moist forests with economic as well as ecological value. Identification of the quantitative and qualitative features of this species is important. In order to investigate the stem form of this species in the Shafaroud forests of Guilan Province, 141 lime trees in 39 plots were analyzed during the four stages of small pole, pole, saw-timber, and maturity. In each plot, stem-diameter at different heights was measured by using the Spiegel Relaskop. Measurements and analyses included diameter at breast height( d.b.h.) and total height. Same parameters was calculated: stem form factor based on diameter, stem form factor based on volume, form quotient, slenderness factor, ratio of stem height to total height, ratio of stem volume to total volume, correlation, and coefficient of determination to describe stem form factor. The results showed that the average stem form factor based on diameter was 0.554. The average stem form factor based on volume was 0.576, average form quotient was 2.32 and slenderness factor was 35.04%. The average ratio of stem height to total height was 82.45. In addition the results indicated a strong relationship between diameter at breast height and trunk coefficient. The ratio of stem volume to total volume revealed that 64.44 of lime volume is located in the bottom half of the trunk. The value of the parameters described here is towards a better description of stand characteristics. Obtained results indicating stability for natural lime tree in Iran.</p></abstract>

The lime tree is one of the rare and valuable species that found in the Hyrcanian moist forests with economic as well as ecological value. Identification of the quantitative and qualitative features of this species is important. In order to investigate the stem form of this species in the Shafaroud forests of Guilan Province, 141 lime trees in 39 plots were analyzed during the four stages of small pole, pole, saw-timber, and maturity. In each plot, stem-diameter at different heights was measured by using the Spiegel Relaskop. Measurements and analyses included diameter at breast height( d.b.h.) and total height. Same parameters was calculated: stem form factor based on diameter, stem form factor based on volume, form quotient, slenderness factor, ratio of stem height to total height, ratio of stem volume to total volume, correlation, and coefficient of determination to describe stem form factor. The results showed that the average stem form factor based on diameter was 0.554. The average stem form factor based on volume was 0.576, average form quotient was 2.32 and slenderness factor was 35.04%. The average ratio of stem height to total height was 82.45. In addition the results indicated a strong relationship between diameter at breast height and trunk coefficient. The ratio of stem volume to total volume revealed that 64.44 of lime volume is located in the bottom half of the trunk. The value of the parameters described here is towards a better description of stand characteristics. Obtained results indicating stability for natural lime tree in Iran.

Determination of lime tree (Tilia begonifolia Stev.) stems form based on quantitative parameters (Study area: Shafaroud forests of Guilan province, Iran)

University of Guilan, Faculty of Natural Resources, Forestry Department, No 62 Daneshgah St, Gaz Sq, P.O.Box 1144, Sowmeh Sara, Guilan, Iran, phone: +989116177552

University of Guilan, Faculty of Natural Resources, Forestry Department, No 62 Daneshgah St, Gaz Sq, P.O.Box 1144, Sowmeh Sara, Guilan, Iran

Lorestan Universitiy, Khoram Abad, Lorestan, Iran

Folia Forestalia Polonica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The lime tree is one of the rare and valuable species that found in the Hyrcanian moist forests with economic as well as ecological value. Identification of...

Determination of lime tree (Tilia begonifolia Stev.) stems form based on quantitative parameters (Study area: Shafaroud forests of Guilan province, Iran)

Pubblicato online: 04 ago 2015

Pagine: 165 - 170

Ricevuto: 02 lug 2013

Accettato: 31 mar 2014

DOI: https://doi.org/10.2478/ffp-2014-0018

Parole chiave
stemform factor, stem form quotient, slenderness factor, coefficient of determination

© 2015

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Determination of lime tree (Tilia begonifolia Stev.) stems form based on quantitative parameters (Study area: Shafaroud forests of Guilan province, Iran)

Pubblicato online: 04 ago 2015

Pagine: 165 - 170

Ricevuto: 02 lug 2013

Accettato: 31 mar 2014

DOI: https://doi.org/10.2478/ffp-2014-0018

Parole chiavestemform factor, stem form quotient, slenderness factor, coefficient of determination

© 2015

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Parole chiave
stemform factor, stem form quotient, slenderness factor, coefficient of determination