On Rough Set Theory on Achieving High Quality Cable Material Production by Green Low Carbon Technology

[1] Broniszewski M, Werle S. Energy efficiency modernizations at the industrial plant: A case study. Ecol Chem Eng S. 2020;27(2):183-93. DOI: 10.2478/eces-2020-0011.10.2478/eces-2020-0011 Search in Google Scholar

[2] Klugmann-Radziemska E, Rudnicka M. Energy yield generated by a small building integrated photovoltaic installation. Ecol Chem Eng S. 2020;27(3):335-46. DOI: 10.2478/eces-2020-0021.10.2478/eces-2020-0021 Search in Google Scholar

[3] Rodziewicz T, Zaremba A, Wacławek M. Photovoltaics: Solar energy resources and the possibility of their use. Ecol Chem Eng S. 2016;23(1):9-32. DOI: 10.1515/eces-2016-0001.10.1515/eces-2016-0001 Search in Google Scholar

[4] Liu T, Wang Q, Sui Y, Wang Q. Microstructure and mechanical properties of overcast 6101-6101 wrought Al alloy joint by squeeze casting. J Mater Sci Technol. 2016;32(4):298-304. DOI: 10.1016/j.jmst.2015.11.020.10.1016/j.jmst.2015.11.020 Search in Google Scholar

[5] Singh D, Jayaganthan R. Effect of post cryorolling treatments on microstructural and mechanical behaviour of ultrafine grained Al-Mg-Si alloy. J Mater Sci Technol. 2014;30(10):998-1005. DOI: 10.1016/j.jmst.2014.03.009.10.1016/j.jmst.2014.03.009 Search in Google Scholar

[6] Sabirov I, Murashkin MY, Valiev RZ. Nanostructured aluminium alloys produced by severe plastic deformation: New horizons in development. Mater Sci Eng A. 2013;560:1-24. DOI: 10.1016/j.msea.2012.09.02010.1016/j.msea.2012.09.020 Search in Google Scholar

[7] Murashkin MY, Sabirov I, Sauvage X, Valiev RZ. Nanostructured Al and Cu alloys with superior strength and electrical conductivity. Mater Sci. 2016;51(1):33-49. DOI: 10.1007/s10853-015-9354-9.10.1007/s10853-015-9354-9 Search in Google Scholar

[8] Huang X, Hansen N, Tsuji N. Hardening by annealing and softening by deformation in nanostructured metals. Science. 2006;312(5771):249-51. DOI: 10.1126/science.1124268.10.1126/science.112426816614217 Search in Google Scholar

[9] Rhee H, Whittington WR, Oppedal AL, Sherif AR, King RL, Kim HJ, et al. Mechanical properties of novel aluminum metal matrix metallic composites: Application to overhead conductors. Materials Design. 2015;88:16-21. DOI: 10.1016/j.matdes.2015.08.109.10.1016/j.matdes.2015.08.109 Search in Google Scholar

[10] Karnesky RA, Meng L, Dunand DC. Strengthening mechanisms in aluminum containing coherent Al3Sc precipitates and incoherent Al₂O₃ dispersoids. Acta Materialia. 2007;55(4):1299-308. DOI: 10.1016/j.actamat.2006.10.004.10.1016/j.actamat.2006.10.004 Search in Google Scholar

[11] Samaee M, Najafi S, Eivani AR, Jafarian HR, Zhou J. Simultaneous improvements of the strength and ductility of fine-grained AA6063 alloy with increasing number of ECAP passes. Mater Sci Eng A. 2016;669:350-7. DOI: 10.1016/j.msea.2016.05.070.10.1016/j.msea.2016.05.070 Search in Google Scholar

[12] Lin G, Zhang Z, Wang H, Zhou K, Wei Y. Enhanced strength and electrical conductivity of Al-Mg-Si alloy by thermo-mechanical treatment. Mater Sci Eng A. 2016;650:210-7. DOI: 10.1016/j.msea.2015.10.050.10.1016/j.msea.2015.10.050 Search in Google Scholar

[13] Liu CH, Chen J, Lai YX, Zhu DH, Gu Y, Chen JH. Enhancing electrical conductivity and strength in Al alloys by modification of conventional thermo-mechanical process. Mater Des. 2015;87:1-5. DOI: 10.1016/j.matdes.2015.07.133.10.1016/j.matdes.2015.07.133 Search in Google Scholar

[14] Valiev RZ, Murashkin MY, Sabirov I. A nanostructural design to produce high-strength Al alloys with enhanced electrical conductivity. Scr Mater. 2014;76:13-6. DOI: 10.1016/j.scriptamat.2013.12.002.10.1016/j.scriptamat.2013.12.002 Search in Google Scholar

[15] Bobruk EV, Murashkin MY, Kazykhanov VU, Valiev RZ. Aging behavior and properties of ultrafine-grained aluminum alloys of Al-Mg-Si system. Rev Adv Mater Sci. 2012;31:109-15. Available from: www.ipme.ru/e-journals/RAMS/no_23112/03_23112_bobruk.html. Search in Google Scholar

[16] Cubero-Sesin JM, Arita M, Horita Z. High strength and electrical conductivity of Al-Fe alloys produced by synergistic combination of high-pressure torsion and aging. Adv Eng Mater. 2015;17(12):1792-803. DOI: 10.1002/adem.201500103.10.1002/adem.201500103 Search in Google Scholar

[17] Luo J, Gao J, Wang A, Huang J. Bulk nanostructured materials based on two-dimensional building blocks: a roadmap. ACS Nano. 2015;9(10):9432-6. DOI: 10.1021/acsnano.5b05259.10.1021/acsnano.5b05259 Search in Google Scholar

[18] Xu C, Schroeder S, Berbon PB, Langdon TG. Principles of ECAP–Conform as a continuous process for achieving grain refinement: Application to an aluminum alloy. Acta Mater. 2010;58(4):1379-86. DOI: 10.1016/j.actamat.2009.10.044.10.1016/j.actamat.2009.10.044 Search in Google Scholar

[19] Dadbakhsh S, Taheri AK, Smith CW. Strengthening study on 6082 Al alloy after combination of aging treatment and ECAP process. Mater Sci Eng A. 2010;527(18-19):4758-66. DOI: 10.1016/j.msea.2010.04.017.10.1016/j.msea.2010.04.017 Search in Google Scholar

[20] Valiev RZ, Islamgaliev RK, Alexandrov IV. Bulk nanostructured materials from severe plastic deformation. Prog Mater Sci. 2000;45(2):103-89. DOI: 10.1016/S0079-6425(99)00007-9.10.1016/S0079-6425(99)00007-9 Search in Google Scholar

[21] Shuai L, Li Z, Zhang DT, Tong YX, Li L. The mechanical property and electrical conductivity evolution of Al-Fe alloy between room temperature and elevated temperature ECAP. Vacuum. 2021;183:109813. DOI: 10.1016/j.vacuum.2020.109813.10.1016/j.vacuum.2020.109813 Search in Google Scholar

[22] Liu W, Ma H, Walsh A. Advance in photonic crystal solar cells. Renew Sust Energy Rev. 2019;116:109436. DOI: 10.1016/j.rser.2019.109436.10.1016/j.rser.2019.109436 Search in Google Scholar

[23] Zhang X, Zang C, Ma H, Wang Z. Study on removing calcium carbonate plug from near wellbore by high-power ultrasonic treatment. Ultrason Sonochem. 2020:104515. DOI: 10.1016/j.ultsonch.2019.03.006.10.1016/j.ultsonch.2019.03.00631753547 Search in Google Scholar

[24] Ma H, Zhang X, Ju F, Tsai S-B. A study on curing kinetics of nano-phase modified epoxy resin. Sci Rep. 2018;8:3045. DOI: 10.1038/s41598-018-21208-0.10.1038/s41598-018-21208-0581301729445228 Search in Google Scholar

[25] Ma H, Tsai S-B. Design of research on performance of a new iridium coordination compound for the detection of Hg²⁺. Int J Env Res Public Health. 2017;14:1232. DOI: 10.3390/ijerph14101232.10.3390/ijerph14101232566473329035349 Search in Google Scholar

[26] Baffari D, Reynolds AP, Masnata A, Fratini L, Ingarao G. Friction stir extrusion to recycle aluminum alloys scraps: energy efficiency characterization. J Manuf Processes. 2019;43:63-9. DOI: 10.1016/j.jmapro.2019.03.049.10.1016/j.jmapro.2019.03.049 Search in Google Scholar

[27] Srinivasan R, Cherukuri B, Chaudhury PK. Scaling up of equal channel angular pressing (ECAP) for the production of forging stock. Mater Sci Forum. 2006;503:371-8. DOI: 10.4028/www.scientific.net/MSF.503-504.371.10.4028/www.scientific.net/MSF.503-504.371 Search in Google Scholar

[28] Hakala M, Nygård K, Manninen S, Huitari S, Buslaps T, Nilsson A, et al. J Chem Phys. 2006:125:084504. DOI: 10.1063/1.2273627.10.1063/1.227362716965026 Search in Google Scholar

[29] Simeonov V. Chem Didact Ecol Metrol. 2019;24(1-2):7-21. DOI: 10.2478/cdem-2019-0001.10.2478/cdem-2019-0001 Search in Google Scholar