<abstract xmlns="http://www.w3.org/1999/xhtml"><p>Twin rotor system is a laboratory setup resembling a simplified helicopter model that moves along both horizontal and vertical axes. The literature on control of twin rotor systems reflects a good amount of research on designing PID controllers and their extensions considering several aspects, as well as onsome nonlinear controllers. However, there is almost no previous work on design of lag-lead type compensators for twin rotor systems. In this study, by considering this open research problem, lag and lead type compensators are designed and then experimentally verified on the twin rotor system. Specifically, first, lag and lag-lag compensators are designed to obtain a reduced steady state error as compared with proportional controllers. Secondly, lead compensation is discussed to obtain a reduced overshoot. Finally, lag-lead compensators are designed to make use of their favorable properties. All compensators are applied to the twin rotor system in our laboratory. From experimental studies, it was observed that steady state error was reduced when a lag compensator was used in conjunction with a lead compensator.</p></abstract>

Twin rotor system is a laboratory setup resembling a simplified helicopter model that moves along both horizontal and vertical axes. The literature on control of twin rotor systems reflects a good amount of research on designing PID controllers and their extensions considering several aspects, as well as onsome nonlinear controllers. However, there is almost no previous work on design of lag-lead type compensators for twin rotor systems. In this study, by considering this open research problem, lag and lead type compensators are designed and then experimentally verified on the twin rotor system. Specifically, first, lag and lag-lag compensators are designed to obtain a reduced steady state error as compared with proportional controllers. Secondly, lead compensation is discussed to obtain a reduced overshoot. Finally, lag-lead compensators are designed to make use of their favorable properties. All compensators are applied to the twin rotor system in our laboratory. From experimental studies, it was observed that steady state error was reduced when a lag compensator was used in conjunction with a lead compensator.

Experimental Verification of Lead-Lag Compensators on a Twin Rotor System

Missouri Science and Technology University

Electrical, Control and Communication Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

{"article-title":"Experimental Verification of Lead-Lag Compensators on a Twin Rotor System"}

Twin rotor system is a laboratory setup resembling a simplified helicopter model that moves along both horizontal and vertical axes. The literature on control...

Experimental Verification of Lead-Lag Compensators on a Twin Rotor System

Pubblicato online: 12 mar 2019

Pagine: 164 - 171

DOI: https://doi.org/10.2478/ecce-2018-0020

Parole chiave
Linear feedback control systems, Pitch control (position), Position control

© 2018 Meryem Deniz et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Experimental Verification of Lead-Lag Compensators on a Twin Rotor System

Pubblicato online: 12 mar 2019

Pagine: 164 - 171

DOI: https://doi.org/10.2478/ecce-2018-0020

Parole chiaveLinear feedback control systems, Pitch control (position), Position control

© 2018 Meryem Deniz et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Parole chiave
Linear feedback control systems, Pitch control (position), Position control