Trends in Rapid Prototyping and Smart Engineering for Central Europe Based on the 3DCentral Project

Deliverable D.T1.1.1, 2018. Report on knowledge, transfer and case management for the project core group and their stakeholders. 3DCentral project documentation.Search in Google Scholar

Deliverable D.T2.3.1, 2016. Curriculum & recruiting scheme for KITTS - Knowledge Innovation Technology Transfer Scouts network. 3DCentral project documentation.Search in Google Scholar

Deliverable D.T2.3.3, 2018. Report On KITTS Network. 3DCentral project documentation.Search in Google Scholar

Deliverable D.T2.3.4, 2018. Report on CE Brain Base. 3DCentral project documentation.Search in Google Scholar

Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Krawczyk, M., 2018a. Simulation of Cavitation Erosion in a Hydraulic Valve. Materials Research Proceedings, 5, 1-6. DOI: 10.21741/9781945291814-110.21741/9781945291814-1Open DOISearch in Google Scholar

Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Kwiatkowski, D., 2018b. Simulation of Particle Erosion in a Hydraulic Valve. Materials Research Proceedings, 5, 17-24. DOI: 10.21741/9781945291814-410.21741/9781945291814-4Open DOISearch in Google Scholar

Fabis-Domagala, J., Filo, G., Momeni, H., Domagala, M., 2018. Instruments of identification of hydraulic components potential failures. MATEC Web Conf., 183, art. 03008. DOI: 10.1051/matecconf/20181830300810.1051/matecconf/201818303008Open DOISearch in Google Scholar

Filo, G., Lisowski, E., Domagala, M., Fabis-Domagala, J., Momeni, H., 2018. Modelling of pressure pulse generator with the use of a flow control valve and a fuzzy logic controller. AIP Conf. Proc., 2029, art. 020015. DOI: 10.1063/1.506647710.1063/1.5066477Open DOISearch in Google Scholar

Gadek-Moszczak, A., Radek, N., Wronski, S., Tarasiuk, J., 2014. Application the 3D image analysis techniques for assessment the quality of material surface layer before and after laser treatment. Adv. Mat. Res. Switz., 874, 133-138. DOI: 10.4028/www.scientific.net/AMR.874.13310.4028/www.scientific.net/AMR.874.133Open DOISearch in Google Scholar

Goffin K., Mitchell R., 2016. Innovation Management: Efective strategy & implementation. Macmillan Education, London.Search in Google Scholar

Jashapara, A., 2010. Knowledge Management. Pearson Education Limited, London.Search in Google Scholar

Kozien, E., 2017. Identification of stage phase growth in the checklist method using different statistical parameters. 20^th Int. Sci. Conf. Economic and Social Development, Prague, Varazdin, 538-545.Search in Google Scholar

Kozien, E., Kozien, A., 2017. Commercialization of scientific research results and transfer knowledge and technologies to economy as determinants of development of universities and enterprises in Poland - legal and economic perspective. 26^th Int. Sci. Conf. Economic and Social Development, Zagreb, Varazdin, 326-335.Search in Google Scholar

Lipinski, T., 2010. The structure and mechanical properties of Al-7%SiMg alloy treated with a homogeneous modifier. Solid State Phenomena, 163, 183-186. DOI: 10.4028/www.scientific.net/SSP.163.18310.4028/www.scientific.net/SSP.163.183Open DOISearch in Google Scholar

Osocha, P., 2018. Calculation of Residual Life for P91 Material Based on Creep Rate and Time to Rupture. Materials Research Proceedings, 5, 177-182. DOI: 10.21741/9781945291814-3110.21741/9781945291814-31Open DOISearch in Google Scholar

Ouma-Onyango, R., 2018. Information resources and technology transfer management in developing countries. Routledge Library Editions.10.4324/9781351131230Search in Google Scholar

Pacana, J., Pacana, A., 2018. Analysis of Possibilities of Using Polymeric Materials for Testing Prototypes of Harmonic Drive. Materials Research Proceedings, 5, 61-66. DOI: 10.21741/9781945291814-1110.21741/9781945291814-11Open DOISearch in Google Scholar

Pasieczynski, L., Radek, N., Klonica, M., Kaminski, J., Swiderski, J., 2018. Properties of BO100-AGR Clearcoat Anti-Graffiti Coating Systems used in the Railway Industry. Materials Research Proceedings, 5, 225-230. DOI: 10.21741/9781945291814-4010.21741/9781945291814-40Open DOISearch in Google Scholar

Pietraszek, J., Kolomycki, M., Szczotok, A., Dwornicka, R., 2016. The fuzzy approach to assessment of ANOVA results. ICCCI 2016: Conf. on Comp. Collective Intell. Springer, 260-268. DOI: 10.1007/978-3-319-45243-2_2410.1007/978-3-319-45243-2_24Open DOISearch in Google Scholar

Pliszka, I., Radek, N., Gadek-Moszczak, A., Fabian, P., Paraska, O., 2018. Surface Improvement by WC-Cu Electro-Spark Coatings with Laser Modification. Materials Research Proceedings, 5, 237-242. DOI: 10.21741/9781945291814-4210.21741/9781945291814-42Open DOISearch in Google Scholar

Radek, N., Pietraszek, J., Szczotok, A., 2018a. Microstructure and Tribological Properties of ESD Coatings after Laser Processing. Materials Research Proceedings, 5, 206-209. DOI: 10.21741/9781945291814-3610.21741/9781945291814-36Open DOISearch in Google Scholar

Radek, N., Szczotok, A., Gadek-Moszczak, A., Dwornicka, R., Broncek, J., Pietraszek, J., 2018b. The impact of laser processing parameters on the properties of electro-spark deposited coatings. Arch. Metall. Mater., 63, 809-816. DOI: 10.24425/12240710.24425/122407Open DOISearch in Google Scholar

Skrzypczak-Pietraszek, E., Reiss, K., Zmudzki, P., Pietraszek, J., 2018. Enhanced accumulation of harpagide and 8-O-acetyl-harpagide in Melittis melissophyllum L. agitated shoot cultures analyzed by UPLC-MS/MS. PLoS ONE 2018, 13, art. e0202556. DOI: 10.1371/journal.pone.020255610.1371/journal.pone.020255610.1371/journal.pone.0202556Search in Google Scholar

Szczotok, A., Radek, N., Dwornicka, R., 2018. Effect of the induction hardening on microstructures of the selected steels. METAL 2018: 27th Int. Conf. Metallurgy and Materials. Ostrava, Tanger, 1264-1269.Search in Google Scholar

Ulewicz, R., Selejdak, R., 2018. Impact of Laser Machining on the Structure and Properties of Tool Steels. Materials Research Proceeding, 5, 37-40. DOI: 10.21741/9781945291814-710.21741/9781945291814-7Open DOISearch in Google Scholar

Work Package T1, 2016. BUILD! Transnational hub for common knowledge. MINDCONSULT, 3DCentral project documentation.Search in Google Scholar