Influence of Steel Fiber on Flexural Strength of Pure Gypsum

[1] MUCHA, M., MRÓZ. P, KOCEMBA, A. Polymer composites based on gypsum matrix. In VIII International Conference on “Times of Polymers and Composites”, American Institute of Physics, (2016). Search in Google Scholar

[2] YU, Q., HJ BROUWERS. Microstructure and mechanical properties of b-hemihydrate produced gypsum: An insight from its hydration process. Construction and Building Materials. (2011); 25: 3149–3157. Search in Google Scholar

[3] JIA, RUIQUAN, QIANG WANG, and PENG FENG. “A comprehensive overview of fibre-reinforced gypsum-based composites (FRGCs) in the construction field.” Composites Part B: Engineering 205 (2021): 108540. Search in Google Scholar

[4] SALIH R.S, and SHAFIQU S.Q. The effect of adding mixture of gypsum- lime with geopolymer on the properties of swelling soil. Civil and Environmental Engineering vol. 20, issue 2, 978-992, doi: 10.2478/cee-2024-0071. Search in Google Scholar

[5] SANAD ME, COMBE, GRANT AA. The Use of Additives to Improve the mechanical properties of Gypsum Products. Journal of Dental Research. (1982); (61)6: 808-810. Search in Google Scholar

[6] PAPAGEORGIOU A, TZOUVALAS G TSIMAS S. Use of Inorganic Setting Retarders in Cement Industry. Cement and Concrete Research. (2005); 25:183-189. Search in Google Scholar

[7] ARIKAN, M, SOBOLEV, K. The optimization of a gypsum-based composite material. Cement Concr Res 2002;32(11):1725–8. Search in Google Scholar

[8] DENG YH, FURUNO T. Study on gypsum-bonded particleboard reinforced with polypropylene fibers. Jpn. Wood Res. Soc. 2001; 47:445–50. Search in Google Scholar

[9] SING M, GARG M. Glass fiber reinforced water-resistant gypsum-based composites. Cement Concr Compos 1992; 12:23–32. Search in Google Scholar

[10] ANG CN, WANG YC. Effect of moisture transfer on specific heat of gypsum plasterboard at high temperatures. Construct Build Mater 2009;23(2):675–86. Search in Google Scholar

[11] XIE S, JI ZJ, YANG Y, HOU GY, WANG J. Electromagnetic wave absorption enhancement of carbon black/gypsum based composites filled with expanded perlite. Compos. Part B-eng 2016; 106:10–9. Search in Google Scholar

[12] HENRIK LN. NOW: 100% wallboard recycling with gypsum recycling international. Global Gypsum Mag 2017; 98:122–9. Search in Google Scholar

[13] RASHAD AM. Phosphogypsum as a construction material. J Clean Prod 2017;166: 732–43. Search in Google Scholar

[14] HUANG XQ, JIANG MM, ZHAO XR, TANG CL. Mechanical properties and hydration mechanisms of high-strength fluorogypsum-blast furnace slag-based hydraulic cementitious binder. Construct Build Mater 2016;127(30):137–43. Search in Google Scholar

[15] ZHANG J, YAN Y, HU Z. Preparation and characterization of foamed concrete with ti-extracted residues and red gypsum. Construct Build Mater 2018; 171:109–19. Search in Google Scholar

[16] LIU XM, WEN HF, EDIL T, BENSON CH. Stabilization of flue gas desulfurization by-products with fly ash, cement, and sialite. Transport Res Rec 2011:102–9. Search in Google Scholar

[17] WANG JM, YANG PL. Potential flue gas desulfurization gypsum utilization in agriculture: a comprehensive review. Renew Sustain Energy Rev 2018;82: 1969–78. Search in Google Scholar

[18] WATTS DB, DICK WA. Sustainable uses of FGD gypsum in agricultural systems: introduction. J Environ Qual 2014; 43:246–52. Search in Google Scholar

[19] ZHANG Y, WANG F, HUANG H, GUO Y, LI B, LIU Y, CHU PK. Gypsum blocks produced from TiO2 production by-products. Environ Technol 2016; 37:1094–100. Search in Google Scholar

[20] BRACHACZEK W, CHLEBOS A. Testing the properties of cement andvgypsum boards reinforced with nonwoven fabrics made of waste and recycled fibres. Civil and Environmental Engineering vol. 19, issue 1, 357-363, doi: 10.2478/cee-2023-0032. Search in Google Scholar

[21] JOSHI RC, THOMAS JO, ADAM RB. Properties of gypsum wall boards containing fly ash. Journal of Materials in Civil Engineering. (1992);4(2):212–25. Search in Google Scholar

[22] BENTUR A, KOVLER K, GOLDMAN A, “Gypsum of improved perfromance using blends with portland cement and silica fume,” advance in cement research. (1995); (6) 23:109-116. Search in Google Scholar

[23] DENG Y, FURUNO T, UEHARA T. Improvement on the properties of gypsum particleboard by adding cement. Journal of Wood Science. (1998); 44:98-102. Search in Google Scholar

[24] HERNANDEZ F, BOLLATI MR, RIOC M, PARGA B. Development of cork gypsum composites for building applications. Construction and Building Materials. (1999); 13:179–86. Search in Google Scholar

[25] AL-RIDHA, S. D., ALI A. ABBOOD, and HUSSEIN H. HUSSEIN. “Improvement of gypsum properties using SF additive.” International Journal of Science and Research 6.8 (2015): 504-509. Search in Google Scholar

[26] ABBOOD A. A. “Improvement of Gypsum Characteristics using (T.G.P.) and (P.V.A.) Additives”, International Journal of Science and Research (IJSR), Volume 7, Issue 2, February 2018. Search in Google Scholar

[27] AL-RIDHA, AHMED SD, ALI A. ABBOOD, ALI F. ATSHAN, HUSSEIN H. HUSSEIN, LAYTH SAHIB DHEYAB, MOHAMMED SABAH MOHIALDEEN, AND HAMEED ZAIER ALI. “A Comparative Study Between the Individual, Dual and Triple Addition of (SF), (TGP) and (PVA) for Improving Local Gypsum (Juss) Properties.” In International Congress and Exhibition” Sustainable Civil Infrastructures”, pp. 65-79. Springer, Cham, 2019. https://doi.org/10.1007/978-3-030-34249-4_7. Search in Google Scholar

[28] DHAHEER, MS ABO, and H. K. AMMASH. “Improvement of ordinary and pure gypsum properties by using polyvinyl alcohol (PVA).” Int. J. Civ. Eng. Technol 9.9 (2018): 323-334. Search in Google Scholar

[29] AL-RIDHA, AHMED SD, ALI A. ABBOOD, YASIR M. AL-BADRAN, HUSSEIN H. HUSSEIN, LAYTH SAHIB DHEYAB, ALI F. ATSHAN, ISAM DHAHIR KHUDHUR, MAHDI RESHAM ALAK, AND AISHA ARKAN AHMED. “Comparative study between the individual, dual and triple addition of (SF), (TGP) and (PVA) for improving Local Plaster of Paris (LPOP) properties.” Materials Today: Proceedings 56 (2022): 2721-2729. Search in Google Scholar

[30] ABBOOD, ALI A., ALI F. ATSHAN, and AHMED SD AL-RIDHA. “Improvement of Local Gypsum Plaster Setting Time by the Combined Usage of (TGP) and (PVA) Additives.” In IOP Conference Series: Materials Science and Engineering, vol. 870, no. 1, p. 012106. IOP Publishing, 2020. https://doi.org/10.1088/1757-899X/870/1/012106. Search in Google Scholar

[31] AL-RIDHA, AHMED SD, ALI A. ABBOOD, ESSAM H. ELAIWI, HUSSEIN H. HUSSEIN, and LAYTH SAHIB DHEYAB. “Increasing the Setting Time of Local Gypsum (Joss) by the Use of TGP additive.” In IOP Conference Series: Materials Science and Engineering, vol. 888, no. 1, p. 012078. IOP Publishing, 2020. https://doi.org/10.1088/1757-899X/888/1/012078. Search in Google Scholar

[32] AL-CHALABI, SAEB F., ESSAM H. ELAIWI, FARAH M. HUSSEIN, ALI A. ABBOOD, SINAN KHALEEL IBRAHIM, HUSSEIN H. HUSSEIN, FIRAS SAEED ABBAS, ENG LUBNA NAJIM ABDULLAH, ENG ZINAH AHMED SHUKRI, and AHMED SD AL-RIDHA. “Evaluating the individual, dual usage of (TGP) and (SF) additives on improving gypsum characteristics.” Materials Today: Proceedings (2022). Search in Google Scholar

[33] ELAIWI, ESSAM H., et al. “The Influence of Water-Gypsum Ratio on the Properties of National Gypsum (Joss) for Various Additives” Materials Today: Proceedings (2023). Search in Google Scholar

[34] SINGH M, MRIDUL G. Glass fibre reinforced water resistant gypsum based composites. Cement Concrete Reasearch. (1992);14(1):23–32. Search in Google Scholar

[35] LI G, YU Y, ZHAO Z, LI J, LI C. Properties study of cotton stalk fiber/gypsum composites. Cement Concrete Reasearch. (2003);33(1):43–6. Search in Google Scholar

[36] MEDINA NF, BARBERO-BARRERA MM. Mechanical and physical enhancement of gypsum composites through a synergic work of polypropylene fiber and recycled isostatic graphite filler. Construction and Building Materials. (2017); 131:165-177. Search in Google Scholar

[37] WU YF, DARE MP. Flexural and shear strength of composite lintels in glass fiber reinforced gypsum wall constructions. Journal of Materials in Civil Engineering. (2006);18(3): 415-423. Search in Google Scholar

[38] AL-RIDHA, AHMED SD, ALI A. ABBOOD, LAITH S. M. AL-ASADI, HUSSEIN H. HUSSEIN and LAYTH SAHIB DHEYAB “Effect of Adding Chopped Carbon Fiber (CCF) on the Improvement of Gypsum Plaster Characteristics “ In IOP Conference Series: Materials Science and Engineering, IOP Publishing, 2020. Search in Google Scholar

[39] JAMEEL, MOHAMMED ABID, LAITH SM AL-ASADI, ZUHAIR ABD HACHEEM, and AHMED SD AL-RIDHA. “Effect of Chopped Carbon Fibre (CCF) on enhancing the compressive strength and density of gypsum plaster.” Materials Today: Proceedings (2022). Search in Google Scholar

[40] AL-RIDHA, AHMED SD, ABBAS FIRAS SAEED, MAHDI FARIS HAMID ABDUL, DHEYAB LAYTH SAHIB, ALI HAMEED ZAIER, and MOHIALDEEN MOHAMMED SABAH. “The influence of chopped copper fibre (CF) on the improvement of pure gypsum by compressive strength.” Journal of Applied Engineering Science 20, no. 2 (2022): 546-551. Search in Google Scholar

[41] SHUBBER, ARSHAD NADHOM, FIRAS SAEED ABBAS, HAYDER MOHAMMED AL-TAWEEL, SINAN KHALEEL IBRAHIM, ALI AL-BALHAWI, YASIR M. AL-BADRAN, LAYTH S. DHEYAB, and AHMED S. AL-RIDHA. “The Evaluation Effect of Copper Fibre Diameter on Enhancing Compressive Strength of Pure Gypsum”. Journal of Ecological Engineering 24 no. 11 (2023): 148-154. doi:10.12911/22998993/171293. Search in Google Scholar

[42] AL-RIDHA, AHMED SD, ALI A. ABBOOD, FARAH M. HUSSEIN, LAYTH SAHIB DHEYAB, ENG LUBNA NAJIM ABDULLAH, ENG HAMEED ZAIER ALI, ENG MOHAMMED SABAH MOHIALDEEN, and ENG AZALDEEN ALI ABDULHUSSEIN. “Effect of Chopped Sisal fiber (CSF) on enhancing the compressive strength of Local Plaster of Paris (LPOP).” Materials Today: Proceedings 47 (2021): 2575-2579. Search in Google Scholar

[43] JÓ´ZWIAK-NIED´ZWIEDZKA, D.; FANTILLI, A. P. Wool-reinforced cement-based composites. Materials 2020, 13, 3590. Cited by Fantilli, Alessandro P., Daria Jóźwiak-Niedźwiedzka, and Piotr Denis. “Bio-Fibres as a Reinforcement of Gypsum Composites.” Materials 14.17 (2021): 4830. Search in Google Scholar

[44] AL-RIDHA, AHMED SD, ALI KADHIM IBRAHIM, HAYDER MOHAMMED AL-TAWEEL, and LAYTH SAHIB DHEYAB. “Effect of Steel Fiber on Ultrasonic Pulse Velocity and Mechanical Properties of Self-Compact Light Weight Concrete.” In IOP Conference Series: Materials Science and Engineering, vol. 518, no. 2, p. 022017. IOP Publishing, 2019. https://doi.org/10.1088/1757-899X/518/2/022017. Search in Google Scholar

[45] AL-RIDHA A. S. D “The Influence of Size of Lightweight Aggregate on The Mechanical Properties Of Self-Compacting Concrete With and Without Steel Fiber” International Journal of Structural & Civil Engineering Research, Vol. 3, No. 1, February 2014. Search in Google Scholar

[46] AL-RIDHA, AHMED SD, ALI A. ABBOOD, SAEB F. AL-CHALABI, ABAA M. AZIZ, and LAYTH SAHIB DHEYAB. “A Comparative Study between the Effect of Steel Fiber on Ultrasonic Pulse Velocity (UPV) in Light and Normal Weight Self-Compacting Concretes.” In IOP Conference Series: Materials Science and Engineering, vol. 888, no. 1, p. 012081. IOP Publishing, 2020. https://doi.org/10.1088/1757-899X/888/1/012081. Search in Google Scholar

[47] AL-RIDHA, AHMED SD, ALI A. ABBOOD, and ALI F. ATSHAN. “Assessment of the Effect of Replacing Normal Aggregate by Porcelinite on the Behaviour of Layered Steel Fibrous Self-Compacting Reinforced Concrete Slabs under Uniform Load.” Journal of Engineering 2020 (2020). https://doi.org/10.1155/2020/3650363. Search in Google Scholar

[48] AL-RIDHA, AHMED SD, A. HAMEED, and SINAN KHALEEL IBRAHIM. “Effect of steel Fiber on the Performance of Hot Mix Asphalt with Different Temperatures and Compaction” Australian Journal of Basic and Applied Sciences 8, no. 6 (2014): 123-132. Search in Google Scholar

[49] AL-RIDHA, AHMED SD, ASST LEC SINAN K. IBRAHIM, and ENG LAYTH SAHIB DHEYAB. “Steel Fiber Effect on the Behavior of Hot Mixture Asphalt with Variable Asphalt Content” International Journal of Advanced Technology in Engineering and Science, Volume No 04, Special Issue No. 01, February 2016. Search in Google Scholar

[50] AL-SARRAF, S. Z., DIAB, A.S., AL-SHAARBAF, I.A. and DIAB, A.S., 2011. Effect of Steel Fiber on the Behavior of Deep Beams with and without Web Opening. Engineering and Technology Journal, 29(1), pp.1-19. Search in Google Scholar

[51] ELAIWI EH, AL-CHALABI SF, AL-ASADI LS, ABBOOD AA, AL-RIDHA AS. “Evaluating the Performance of Fibrous Cement Mortar Containing Chopped Carbon Fiber (C.C.F.)” In IOP Conference Series: Materials Science and Engineering 2020. IOP Publishing. Search in Google Scholar

[52] AL-RIDHA, A.S.D., ABUZAID, E.K.M. and ABBOOD, A.A.R., 2018. Effect of Addition of Chopped Carbon Fiber on The Behavior of Reinforced Concrete Beams With Variable (Shear Distance To Effective Depth) Ratios. Journal of Engineering and Sustainable Development, 22(1), pp.137-148. Search in Google Scholar

[53] ROUX, N., C. ANREADEAND M.A.SANJUAN, 1996. Experimental Study of Durability of Reactive Powder Concretes. Journal of Materials in Civil Engineering, February, pp: 1-6. Search in Google Scholar

[54] ASTM C472-99(2014), Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete, ASTM International, West Conshohocken, PA, 2014. Search in Google Scholar

[55] “Iraqi standard specification for physical tests of gypsum for building purposes” NO.27. 1988. (In Arabic), Ministry of Planning. Search in Google Scholar

[56] J. LEWRY and J. WILLIAMSON, “The setting of gypsum plaster: part II The development of microstructure and strength,” Journal of Materials Science, vol. 29, pp.5 524-5528, 1994. Cited by reference Sayonara M. M. Pinheiro and Gladis Camarini “Characteristics of Gypsum Recycling in Different Cycles” IACSIT International Journal of Engineering and Technology, Vol. 7, No. 3, June 2015. Search in Google Scholar

[57] Q. L. YU AND H. J. H. BROUWERS, “Microstructure and mechanical properties of b-hemihydrate produced gypsum: An insight from its hydration process,” Construction and Building Materials, vol. 25, pp.3149-3157, 2011. Cited by reference Sayonara M. M. Pinheiro and Gladis Camarini “Characteristics of Gypsum Recycling in Different Cycles” IACSIT International Journal of Engineering and Technology, Vol. 7, No. 3, June 2015. Search in Google Scholar