Study the Effect of Adding Waste Tire Rubber on Permeation and Thermal Properties of Fiber-Reinforced Foam Concrete

[1] RAJ, B., et al., Mechanical and durability properties of hybrid fiber reinforced foam concrete. Construction and Building Materials, 2020. 245: p. 118373. Search in Google Scholar

[2] IBRAHIM, H.A. and W.A. ABBAS, Fresh Properties of Self-Consolidating Expired Cement-Fly Ash Cold Bonded Lightweight Aggregate Concrete With Different Mineral Admixtures. Engineering and Technology Journal, 2023. 41(05): p. 734-744. Search in Google Scholar

[3] ALMALKAWI, A.T., et al., Behavior of a lightweight frame made with aerated slurry-infiltrated chicken mesh under cyclic lateral loading. Construction and Building Materials, 2018. 160: p. 679-686. Search in Google Scholar

[4] SUN, C., et al., Effects of foaming agent type on the workability, drying shrinkage, frost resistance and pore distribution of foamed concrete. Construction and Building Materials, 2018. 186: p. 833-839. . Search in Google Scholar

[5] ABBAS, M.L. and W.A. ABBAS, Cold-bonded lightweight synthetic aggregate involving high reactive attapulgite at different curing conditions. Engineering and Technology Journal, 2023. 41(11): p. 1-14. Search in Google Scholar

[6] HASSANLI, R., et al., Experimental and numerical study on the behavior of rubberized concrete. Advances in Civil Engineering Materials, 2017. 6(1): p. 134-156. . Search in Google Scholar

[7] ZÁLESKÁ, M., et al., Eco-friendly concrete with scrap-tyre-rubber-based aggregate–Properties and thermal stability. Construction and Building Materials, 2019. 225: p. 709-722. Search in Google Scholar

[8] LI, D., et al., Compressive stress strain behavior of crumb rubber concrete (CRC) and application in reinforced CRC slab. Construction and Building Materials, 2018. 166: p. 745-759.. Search in Google Scholar

[9] AHMED, S.N., A.L. ALMUTAIRI, and W.B. DOMAT, Non-Linear Analysis of Hybrid Reinforced T-Beam with Partial Substitution Recycled Rubberized Concrete. Civil and Environmental Engineering, 2024. 20(1): p. 397-410. Search in Google Scholar

[10] HILAL, A.A., Effect of crumb tyres rubber on some properties of foamed concrete. Anbar Journal for Engineering Sciences, 2011. 4(2): p. 1-17. . Search in Google Scholar

[11] AHMED, H.K., W.A. ABBAS, and D.M. ABDUL-RAZZAQ, Effect of plastic fibers on properties of foamed concrete. Eng Technol J, 2013. 31(Part A (7): p. 1313-30. Search in Google Scholar

[12] MEHRANI, S.A., et al., Utilization of Rubber powder of waste tyres in foam concrete. Journal of Applied Engineering Sciences, 2019. 9(1): p. 87-90. Search in Google Scholar

[13] KASHANI, A., et al., A sustainable application of recycled tyre crumbs as insulator in lightweight cellular concrete. Journal of cleaner production, 2017. 149: p. 925-935. . Search in Google Scholar

[14] KASHANI, A., et al., Effects of surface treatments of recycled tyre crumb on cement-rubber bonding in concrete composite foam. Construction and Building Materials, 2018. 171: p. 467-473. Search in Google Scholar

[15] EIRAS, J., et al., Physical and mechanical properties of foamed Portland cement composite containing crumb rubber from worn tires. Materials & Design, 2014. 59: p. 550-557. . Search in Google Scholar

[16] BAYRAKTAR, O.Y., et al., Effect of cement dosage and waste tire rubber on the mechanical, transport and abrasion characteristics of foam concretes subjected to H2SO4 and freeze–thaw. Construction and Building Materials, 2021. 302: p. 124229. . Search in Google Scholar

[17] DAMIANI, R.M., Y. Song, and D.A. Lange, Effect of Waste Rubber Inclusion on the Microstructure and Mechanical Performance of Low-Density Foam Concrete. Journal of Materials in Civil Engineering, 2024. 36(7): p. 04024159. Search in Google Scholar

[18] ASTM C150/C150M, Standard Specification for Portland Cement, ASTM International: PA, USA, 2022. Search in Google Scholar

[19] ASTM C 618-19, Standard specification for coal fly ash and raw or calcined natural pozzolan for use as a mineral admixture in Portland cement concrete, ASTM International: PA, USA, 2019. Search in Google Scholar

[20] HILAL, A.A., N.H. THOM, and A.R. DAWSON, Pore structure and permeation characteristics of foamed concrete. Journal of Advanced Concrete Technology, 2014. 12(12): p. 535-544. . Search in Google Scholar

[21] ASTM C33-18, Standard specification for concrete aggregates, ASTM International: PA, USA, 2018. Search in Google Scholar

[22] OBAID, H.A. and A.A. HILAL, Foam concrete made with micro and nano silica sand: Pore structure and properties. Volume 12, Number 3, September 2021, p. 207-216. Search in Google Scholar

[23] ASTM C494/C494M-17 Standard Specification for Chemical Admixtures for Concrete, ASTM International: PA, USA, 2017. Search in Google Scholar

[24] ACI 523.3R-14, Guide for Cellular Concretes above 50 lb/ft3(800 kg/m3). 2014. Search in Google Scholar

[25] Jaffal, A.N., A.A. Hilal, and A.S. Mahmoud, Behavior of Reinforced Composite Foamed-Normal Concrete Beams. Journal of Engineering, 2023. 2023(1): p. 3653472. Search in Google Scholar

[26] ASTM C796/C796M-19, Standard test method for foaming agent for use in producing cellular concrete using preformed foam, ASTM International: PA, USA, 2019. Search in Google Scholar

[27] RAMAMURTHY, K., E.K. NAMBIAR, and G.I.S. RANJANI, A classification of studies on properties of foam concrete. Cement and concrete composites, 2009. 31(6): p. 388-396. Search in Google Scholar

[28] HILAL, A.A., N.H. THOM, and A.R. DAWSON, On void structure and strength of foamed concrete made without/with additives. Construction and Building Materials, 2015. 85: p. 157-164. . Search in Google Scholar

[29] ASTM C1113-99, Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique, ASTM International: PA, USA,1999. Search in Google Scholar

[30] KEARSLEY, E. and P. WAINWRIGHT, The effect of porosity on the strength of foamed concrete. Cement and concrete research, 2002. 32(2): p. 233-239. Search in Google Scholar

[31] ASTM C1585-20, Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes, ASTM International: West Conshohocken, PA, USA, 2011. Search in Google Scholar

[32] KEARSLEY, E. and P. WAINWRIGHT, Porosity and permeability of foamed concrete. Cement and concrete research, 2001. 31(5): p. 805-812. Search in Google Scholar

[33] NAMBIAR, E.K. and K. RAMAMURTHY, Sorption characteristics of foam concrete. Cement and concrete research, 2007. 37(9): p. 1341-1347. . Search in Google Scholar

[34] KEARSLEY, E.P., The effect of high volumes of ungraded fly ash on the properties of foamed concrete. 1999, university of leeds. Search in Google Scholar

[35] OREN, O.H., et al., Physical and mechanical properties of foam concretes containing granulated blast furnace slag as fine aggregate. Construction and Building Materials, 2020. 238: p. 117774. Search in Google Scholar

[36] ZÁLESKÁ, M., et al. Mechanical and thermal properties of light-weight concrete with incorporated waste tire rubber as coarse aggregate. in AIP Conference Proceedings. 2019. AIP Publishing. Search in Google Scholar

[37] ZÁLESKÁ, M., et al. Evaluation of the size effect of waste tyre rubber particles on properties of lightweight rubber concrete. in IOP Conference Series: Materials Science and Engineering. 2019. IOP Publishing. Search in Google Scholar

[38] ZHANG, H., et al., Properties of silt-based foamed concrete: A type of material for use in backfill behind an abutment. Construction and Building Materials, 2020. 261: p. 119966. Search in Google Scholar

[39] ZHENG, G., Study on Properties of Fiber Reinforced Foam Concrete. 2022. Search in Google Scholar

[40] ZHANG, P. and Q.-F. LI, Effect of polypropylene fiber on durability of concrete composite containing fly ash and silica fume. Composites Part B: Engineering, 2013. 45(1): p. 1587-1594. Search in Google Scholar