<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>This paper scrutinizes bending performance of light weight half-slab mortar against bending and punching load. To produce the slab, 30 % round bud Styrofoam was used as fine aggregate substitution. Besides, glazed nylon fiber was applied to increase its tension strength and cavities at tension area of slab were also created. This method results in the significant reduction of self-weight of half-slab, while the cavities do not affect its bending performance and the fiber increases its ductility. Furthermore, the lower result of punching test should not to be a disadvantage as the slab is primarily to be used as a formwork.</p>
</abstract>

This paper scrutinizes bending performance of light weight half-slab mortar against bending and punching load. To produce the slab, 30 % round bud Styrofoam was used as fine aggregate substitution. Besides, glazed nylon fiber was applied to increase its tension strength and cavities at tension area of slab were also created. This method results in the significant reduction of self-weight of half-slab, while the cavities do not affect its bending performance and the fiber increases its ductility. Furthermore, the lower result of punching test should not to be a disadvantage as the slab is primarily to be used as a formwork.

Bending Performance of Half-Slab Styrofoam Mortar with Glazed Nylon Fiber

Civil Engineering Study Program Universitas Muhammadiyah Surakarta

Civil & Environmental Engineering Department

Universitas Muhammadiyah Kalimantan Timur

Civil and Environmental Engineering

This work is licensed under the Creative Commons Attribution 4.0 International License.

{"article-title":"Bending Performance of Half-Slab Styrofoam Mortar with Glazed Nylon Fiber"}

This paper scrutinizes bending performance of light weight half-slab mortar against bending and punching load. To produce the slab, 30 % round bud Styrofoam...

Bending Performance of Half-Slab Styrofoam Mortar with Glazed Nylon Fiber

Pubblicato online: 22 giu 2021

Pagine: 50 - 57

DOI: https://doi.org/10.2478/cee-2021-0006

Parole chiave
Half-slab, Light-weight mortar, Styrofoam, Fiber, Cavities

© 2021 Mochamad Solikin et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Bending Performance of Half-Slab Styrofoam Mortar with Glazed Nylon Fiber

Pubblicato online: 22 giu 2021

Pagine: 50 - 57

DOI: https://doi.org/10.2478/cee-2021-0006

Parole chiaveHalf-slab, Light-weight mortar, Styrofoam, Fiber, Cavities

© 2021 Mochamad Solikin et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Parole chiave
Half-slab, Light-weight mortar, Styrofoam, Fiber, Cavities