<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The breaking capacity of a medium voltage (MV) rotary SF<sub>6</sub> load break switch (LBS) can be improved by incorporating permanent magnets into the stationary contacts. The magnetic field is intended to blow the switching arc root towards a recessed space at the stationary contacts thereby preventing reignition of the arc after current zero. Making and breaking tests of load current 630 A were performed comparing the switching performance of load break switches equipped without a permanent magnet, with a ferrite and with a neodymium magnet. The impact of different polarity arrangements of the magnets in the three phases is also considered and analysed. In order to understand the arc behaviour caused by the effect of permanent magnet, arcing times and arc voltage were measured and evaluated. The results show that the arc voltage depends on the direction of the electromagnetic force, which is determined by the phase current direction but also by the polarity of the magnets. When the force is directed towards the recessed space at the stationary contacts, the arc voltage is notably higher than in the case where the arc is blown in the opposite direction. The higher arc voltage is a reliable indication that the length of the arc is increased, which significantly reduces the risk of both thermal and dielectric breakdowns after the first current zero. The consequences are noticed first in the reduction of the number of missed current zeroes and second in shorter minimum arcing times. An adverse arrangement of the magnet polarity in the three phases increases the number of missed current zeroes.</p>
</abstract>

The breaking capacity of a medium voltage (MV) rotary SF6 load break switch (LBS) can be improved by incorporating permanent magnets into the stationary contacts. The magnetic field is intended to blow the switching arc root towards a recessed space at the stationary contacts thereby preventing reignition of the arc after current zero. Making and breaking tests of load current 630 A were performed comparing the switching performance of load break switches equipped without a permanent magnet, with a ferrite and with a neodymium magnet. The impact of different polarity arrangements of the magnets in the three phases is also considered and analysed. In order to understand the arc behaviour caused by the effect of permanent magnet, arcing times and arc voltage were measured and evaluated. The results show that the arc voltage depends on the direction of the electromagnetic force, which is determined by the phase current direction but also by the polarity of the magnets. When the force is directed towards the recessed space at the stationary contacts, the arc voltage is notably higher than in the case where the arc is blown in the opposite direction. The higher arc voltage is a reliable indication that the length of the arc is increased, which significantly reduces the risk of both thermal and dielectric breakdowns after the first current zero. The consequences are noticed first in the reduction of the number of missed current zeroes and second in shorter minimum arcing times. An adverse arrangement of the magnet polarity in the three phases increases the number of missed current zeroes.

Analysis and Tests of the Impact of Permanent Magnets on Current Interruption in a Medium Voltage Rotary Load Break Switch

B&H Electrical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The breaking capacity of a medium voltage (MV) rotary SF6 load break switch (LBS) can be improved by incorporating permanent magnets into the stationary...

Analysis and Tests of the Impact of Permanent Magnets on Current Interruption in a Medium Voltage Rotary Load Break Switch

Pubblicato online: 17 ott 2022

Pagine: 43 - 53

Ricevuto: 01 lug 2021

Accettato: 01 set 2021

DOI: https://doi.org/10.2478/bhee-2021-0005

Parole chiave
load break switch, permanent magnets, electromagnetic force, switching arc, arc voltage

© 2022 Sead Delić et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Analysis and Tests of the Impact of Permanent Magnets on Current Interruption in a Medium Voltage Rotary Load Break Switch

Pubblicato online: 17 ott 2022

Pagine: 43 - 53

Ricevuto: 01 lug 2021

Accettato: 01 set 2021

DOI: https://doi.org/10.2478/bhee-2021-0005

Parole chiaveload break switch, permanent magnets, electromagnetic force, switching arc, arc voltage

© 2022 Sead Delić et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Parole chiave
load break switch, permanent magnets, electromagnetic force, switching arc, arc voltage