<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The aim of this work was to investigate the effect of processing parameters of the electrospinning method on the resulting poly (vinylidene fluoride) (PVDF) fiber diameter. A three factorial Box-Behnken experimental design was employed to study the influence of applied voltage, the capillary-to-collector distance and the applied flow rate on the resulting fiber diameter. We successfully prepared bead-free PVDF nanofibers with fiber diameters ranging from 510-1300 nm. The experimental design analysis did not show significant influence of the studied process parameters under the used boundary conditions on the fiber diameter, thus indicating the robustness of the process.</p>
</abstract>

The aim of this work was to investigate the effect of processing parameters of the electrospinning method on the resulting poly (vinylidene fluoride) (PVDF) fiber diameter. A three factorial Box-Behnken experimental design was employed to study the influence of applied voltage, the capillary-to-collector distance and the applied flow rate on the resulting fiber diameter. We successfully prepared bead-free PVDF nanofibers with fiber diameters ranging from 510-1300 nm. The experimental design analysis did not show significant influence of the studied process parameters under the used boundary conditions on the fiber diameter, thus indicating the robustness of the process.

Process Optimization of PVDF Piezoelectric Nanofiber Production via Electrospinning

Sapientia Hungarian University of Transylvania

Faculty of Technical and Human Sciences, Târgu Mureș, Department of Mechanical Engineering

Acta Universitatis Sapientiae, Electrical and Mechanical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The aim of this work was to investigate the effect of processing parameters of the electrospinning method on the resulting poly (vinylidene fluoride) (PVDF)...

Process Optimization of PVDF Piezoelectric Nanofiber Production via Electrospinning

Pubblicato online: 30 dic 2021

Pagine: 1 - 13

Ricevuto: 20 ott 2021

Accettato: 01 nov 2021

DOI: https://doi.org/10.2478/auseme-2021-0001

Parole chiave
PVDF, electrospinning, nanofiber, piezoelectricity, polymer processing

© 2021 Attila Levente Gergely et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Process Optimization of PVDF Piezoelectric Nanofiber Production via Electrospinning

Pubblicato online: 30 dic 2021

Pagine: 1 - 13

Ricevuto: 20 ott 2021

Accettato: 01 nov 2021

DOI: https://doi.org/10.2478/auseme-2021-0001

Parole chiavePVDF, electrospinning, nanofiber, piezoelectricity, polymer processing

© 2021 Attila Levente Gergely et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Parole chiave
PVDF, electrospinning, nanofiber, piezoelectricity, polymer processing