<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>In this study, we evaluate the thermal and mechanical properties of materials based on polypropylene (PP), high-density polyethylene (HDPE), and polyethylene terephthalate (PET) using the thermogravimetric analysis and impulse excitation technique. The results show that even if the melted input material together with the pressure of ~4 MPa was used to produce the samples, we can find small cavities around the sand grains in the samples. In case of thermal stability, the results show that in case of HDPE + PET combination, higher temperature should be used. Besides that, the results show that sand should increase the Young’s modulus of the samples from recycled materials.</p>
</abstract>

In this study, we evaluate the thermal and mechanical properties of materials based on polypropylene (PP), high-density polyethylene (HDPE), and polyethylene terephthalate (PET) using the thermogravimetric analysis and impulse excitation technique. The results show that even if the melted input material together with the pressure of ~4 MPa was used to produce the samples, we can find small cavities around the sand grains in the samples. In case of thermal stability, the results show that in case of HDPE + PET combination, higher temperature should be used. Besides that, the results show that sand should increase the Young’s modulus of the samples from recycled materials.

Thermal and Mechanical Properties of Materials with Adverse Effect on the Environment

Acta Technologica Agriculturae

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

In this study, we evaluate the thermal and mechanical properties of materials based on polypropylene (PP), high-density polyethylene (HDPE), and polyethylene...

Thermal and Mechanical Properties of Materials with Adverse Effect on the Environment

Pubblicato online: 23 mag 2023

Pagine: 79 - 83

DOI: https://doi.org/10.2478/ata-2023-0011

Parole chiave
polymers, sand, thermogravimetric analysis, impulse excitation technique

© 2023 Ladislav Smutný et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Thermal and Mechanical Properties of Materials with Adverse Effect on the Environment

Pubblicato online: 23 mag 2023

Pagine: 79 - 83

DOI: https://doi.org/10.2478/ata-2023-0011

Parole chiavepolymers, sand, thermogravimetric analysis, impulse excitation technique

© 2023 Ladislav Smutný et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Parole chiave
polymers, sand, thermogravimetric analysis, impulse excitation technique