INFORMAZIONI SU QUESTO ARTICOLO

Cita

ABRAHÁM, R. – MAJDAN, R. – DRLIČKA, R. 2019. Special tractor driving wheels with two modification of spikes inclination angle. In Agronomy Research, vol. 17, pp. 333–342. Search in Google Scholar

ABRAHÁM, R. – MAJDAN, R. – KOLLÁROVÁ, K. – TKÁČ, Z. – OLEJÁR, M. – MATEJKOVÁ, E. – KUBÍK, Ľ. 2021. Frequency spectra analysis of drawbar pulls generated by special driving wheels improving tractive performance. In Sensors, vol. 21, article no. 2903. Search in Google Scholar

ABRAHÁM, R. – VARGA, F. – MAJDAN, R. – MOJŽIŠ, M. 2012. Design of improvement of adhesive properties of tyres on snow, ice and soil. In Acta Technologica Agriculturae, vol. 15, no. 1, pp. 1–4. Search in Google Scholar

BATTIATO, A. – DISEREN, E. 2013. Influence of tyre inflation pressure and wheel load on the traction performance of a 65 kW MFWD tractor on a cohesive soil. In Journal of Agricultural Science, vol. 5, no. 8, pp. 197–215. Search in Google Scholar

BULKO, R. – GAGO, F. 2017. Deformation parameters of soils determined by the cone penetration test. In MATEC Web of Conferences, 26th R-S-P Seminar on Theoretical Foundation of Civil Engineering (RSP), vol. 117, no. 00025, pp. 1–8. Search in Google Scholar

FORSTER, M. – UGARTE, C. – LAMANDÉ, M. – FAUCON, M. P. 2020. Relationships between root traits and soil physical properties after field traffic from the perspective of soil compaction mitigation. In Agronomy, vol. 10, article no. 1697. Search in Google Scholar

FREITAG, D. R. 1965. Wheels on Soft Soils: An Analysis of Existing Data. Vicksburg, Mississippi, USA : Army MRC. Search in Google Scholar

GASPARETTO, E. – FEBO, P. – PESSINA, D. – RIZZATO, E. 1992. The rolling resistance of narrow steel wheels in Italian paddy fields. In Journal of Agricultural Engineering Research, vol. 52, pp. 91–100. Search in Google Scholar

GE, J. – WANG, X. – KITO, K. 2016. Comparing tractive performance of steel and rubber single grouser shoe under different soil moisture contents. In International Journal of Agricultural & Biological Engineering, vol. 9, no. 2, pp. 11–20. Search in Google Scholar

GEE-CLOUGH, D. – McALLISTER, R. M. – EVERNDEN, D. W. 1977. Tractive performance of tractor drive tyres. In Journal of Agricultural Engineering Research, vol. 22, no. 4, pp. 385–395. Search in Google Scholar

HELEXA, M. 2014. Monitoring the impact of tyre inflation pressure on tensile properties of forest tractor. In Research in Agricultural Engineering, vol. 60, no. 4, pp. 127–133. Search in Google Scholar

HELEXA, M. – KOVÁČ, J. – KRILEK, J. – MELICHERČÍK, J. – KUVIK, T. 2022. Comparison of achieved rolling resistance values of two selected tires on a solid surface. In Applied Sciences, vol. 12, article no. 2251. Search in Google Scholar

HENDRIADI, A. – SALOKHE, V. M. 2002. Improvement of a power tiller cage wheel for use in swampy peat soils. In Journal of Terramechanics, vol. 39, no. 2, pp. 55–70. Search in Google Scholar

HERMAWAN, W. – YAMAZAKI, M. – OIDA, A. 1998. Theoretical analysis of soil reaction on a lug of the movable lug cage wheel. In Journal of Terramechanics, vol. 37, no. 2, pp. 65–86. Search in Google Scholar

HUJO, Ľ. – JABLONICKÝ, J. – MARKOVIČ, J. – TULÍK, J. – SIMIKIĆ, M. – ZASTEMPOWSKI, M. – JANOUŠKOVÁ, R. 2021. Design of laboratory test equipment for automotive oil filters to evaluate the technical life of engine oil. In Applied Sciences, vol. 11, article no. 483. Search in Google Scholar

IRANI, R. A. – BAUER, R. J. – WARKENTIN, A. 2011. A dynamic terramechanic model for small lightweight vehicles with rigid wheels and grousers operating in sandy soil. In Journal of Terramechanics, vol. 48, no. 2, pp. 307–318. Search in Google Scholar

KOSIBA, J. – TKÁČ, Z. – HUJO, Ľ. – BUREŠ, Ľ. 2011. Operating modes of hydraulic circuit of tractor Zetor Forterra 114 41. In Acta Technologica Agriculturae, vol. 14, no. 2, pp. 46–49. Search in Google Scholar

KUČERA, M. – HELEXA, M. – MOLENDA, M. 2016. Selected tire characteristics and their relation to its radial stiffness. In MM Science Journal, vol. 9, no. 6, pp. 1524–1530. Search in Google Scholar

MAJDAN, R. – ABRAHÁM, R. – TKÁČ, Z. – DRLIČKA, R. – MATEJKOVÁ, E. – KOLLÁROVÁ, K. – MAREČEK, J. 2021. Static lateral stability of tractor with rear wheel ballast weights: comparison of ISO 16231-2 (2015) with experimental data regarding tyre deformation. In Applied Sciences, vol. 11, article no. 381. Search in Google Scholar

MAJDAN, R. – ABRAHÁM, R. – TKÁČ, Z. – MOJŽIŠ, M. 2018. Drawbar parameters of tractor with prototypes of driving wheels and standard tyres. In Acta Technologica Agriculturae, vol. 21, no. 2, pp. 63–68. Search in Google Scholar

MALÝ, V. – KUČERA M. 2014. Determination of mechanical properties of soil under laboratory conditions. In Research in Agricultural Engineering, vol. 60, pp. S66–S69. Search in Google Scholar

MALÝ, V. – TÓTH, F. – MAREČEK, J. – KRČÁLOVÁ, E. 2015. Laboratory test of the soil compaction. In Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, vol. 63, no. 1, pp. 77–85. Search in Google Scholar

MOLARI, G. – BELLENTANI, L. – GUARNIERI, A. – WALKER, M. – SEDONI, E. 2020. Performance of an agricultural tractor fitted with rubber tracks. In Biosystems Engineering, vol. 111, no. 1, pp. 57–63. Search in Google Scholar

RASOOL, S. – RAHEMAN, H. 2018. Improving the tractive performance of walking tractors using rubber tracks. In Biosystems Engineering, vol. 167, pp. 51–62. Search in Google Scholar

SALOKHE, V. M. – MANZOOR, S. – GEE-CLOUGH, D. 1989. The measurement of forces on a cage wheel lug when operating in wet clay soil. In Soil and Tillage Research, vol. 14, no. 4, pp. 327–340. Search in Google Scholar

SCHREIBER, M. – KUTZBACH, H. D. 2008. Influence of soil and tire parameters on traction. In Research in Agricultural Engineering, vol. 54, no. 2, pp. 43–49. Search in Google Scholar

SEMETKO, J. – JANOŠKO, I. – PERNIS, P. 2002. Determination of driving force of tractor and trailer wheels. In Acta Technologica Agriculturae, vol. 5, no. 1, pp. 1–4. Search in Google Scholar

SEMETKO, J. – JANOŠKO, I. – PERNIS, P. 2004. Determination of power of multidrive vehicles. In Acta Technologica Agriculturae, vol. 7, no. 1, pp. 20–23. Search in Google Scholar

ŠMERDA, T. – ČUPERA, J. 2010. Tire inflation and its influence on drawbar characteristics and performance – energetic indicators of a tractor set. In Journal of Terramechanics, vol. 47, no. 6, pp. 395–400. Search in Google Scholar

STN ISO 789-9. 1993. Power Test for Drawbar. Bratislava, Slovakia : Slovak Office of Standards, Metrology and Testing. Search in Google Scholar

TKÁČ, Z. – ČORŇÁK, Š. – CVIKLOVIČ, V. – KOSIBA, J. – GLOS, J. – JABLONICKÝ, J. – BERNÁT, R. 2017. Research of biodegradable fluid impacts on operation of tractor hydraulic system. In Acta Technologica Agriculturae, vol. 20, no. 2, 42–45. Search in Google Scholar

TRIRATANASIRICHAI, K. T. – OIDA, A. – HONDA, M. 1990. The performance of cage wheels for small power tillers in agricultural soil. In Journal of Terramechanics, vol. 27, no. 3, pp. 193–205. Search in Google Scholar

VARANI, M. – MATTETTI, M. – MARALDI, M. – MOLARI, G. 2020. Mechanical devices for mass distribution adjustment: Are they really convenient? In Agronomy, vol. 10, article no. 1820. Search in Google Scholar

WANG, X. L. – YAMAZAKI, M. – TANAKA, T. 1995. Characteristics of soil reactions of an open lugged wheel under paddy soil conditions. In Journal of Terramechanics, vol. 32, pp. 115–125. Search in Google Scholar

WATYOTHA, C. – GEE-CLOUGH, D. – SALOKHE, V. M. 2001. Effect of circumferential angle, lug spacing and slip on lug wheel forces. In Journal of Terramechanics, vol. 38, pp. 1–14. Search in Google Scholar

WATYOTHA, C. – SALOKHE, V. M. 2001. PM – Power and machinery: tractive performance of cage wheels with opposing circumferential lugs. In Journal of Agricultural Engineering Research, vol. 79, no. 4, pp. 398–398. Search in Google Scholar

YANG, Y. – YI, S. – SHUGEN, M. 2014. Drawbar pull of a wheel with an actively actuated lug on sandy terrain. In Journal of Terramechanics, vol. 56, pp. 17–24. Search in Google Scholar

eISSN:
1338-5267
Lingua:
Inglese
Frequenza di pubblicazione:
4 volte all'anno
Argomenti della rivista:
Engineering, Introductions and Overviews, other