<abstract xmlns="http://www.w3.org/1999/xhtml">

<sec>
<h3>Background</h3>
<p>Methods used to upright lingually tilted mandibular molars frequently result in extrusion and unwanted rotations.</p>
</sec>
<sec>
<h3>Aim</h3>
<p>To use the finite element method (FEM) to compare three springs designed to upright a lingually tilted mandibular first molar.</p>
</sec>
<sec>
<h3>Methods</h3>
<p>A 3-D computer model of a lingually tilted mandibular first molar was designed. The FEM was used to compare movement of the molar during uprighting with either a single horizontal helix, an open vertical loop, or a new spring with two vertical helices wound around and perpendicular to the long axis of the archwire. Each spring was assumed to be part of a continuous 0.016 x 0.022 inch stainless steel archwire, and each spring was placed mesial to the buccal tube on the first molar.</p>
</sec>
<sec>
<h3>Results</h3>
<p>From the mesial perspective, all designs moved the crown of the lingually tilted molar buccally and the root apex lingually. From the occlusal perspective: the horizontal helix uprighted the molar with a disto-buccal rotation; the open vertical loop uprighted the molar with a mesio-buccal rotation; and the new design uprighted the lingually tilted molar around a mesio-distal axis.</p>
</sec>
<sec>
<h3>Conclusion</h3>
<p>Using FEM, the most suitable design was a double helix formed around and perpendicular to the long axis of the archwire and sited mesial to the tilted molar. It was the only spring to upright the lingually tilted molar without an unwanted rotation.</p>
</sec>
</abstract>

Background
Methods used to upright lingually tilted mandibular molars frequently result in extrusion and unwanted rotations.


Aim
To use the finite element method (FEM) to compare three springs designed to upright a lingually tilted mandibular first molar.


Methods
A 3-D computer model of a lingually tilted mandibular first molar was designed. The FEM was used to compare movement of the molar during uprighting with either a single horizontal helix, an open vertical loop, or a new spring with two vertical helices wound around and perpendicular to the long axis of the archwire. Each spring was assumed to be part of a continuous 0.016 x 0.022 inch stainless steel archwire, and each spring was placed mesial to the buccal tube on the first molar.


Results
From the mesial perspective, all designs moved the crown of the lingually tilted molar buccally and the root apex lingually. From the occlusal perspective: the horizontal helix uprighted the molar with a disto-buccal rotation; the open vertical loop uprighted the molar with a mesio-buccal rotation; and the new design uprighted the lingually tilted molar around a mesio-distal axis.


Conclusion
Using FEM, the most suitable design was a double helix formed around and perpendicular to the long axis of the archwire and sited mesial to the tilted molar. It was the only spring to upright the lingually tilted molar without an unwanted rotation.

Comparison of methods used to correct a lingually tilted mandibular molar: 3-D analysis using the finite element method (FEM)

Australasian Orthodontic Journal

This work is licensed under the Creative Commons Attribution 4.0 International License.

Background
Methods used to upright lingually tilted mandibular molars frequently result in extrusion and unwanted rotations.


Aim
To use the finite element...

Comparison of methods used to correct a lingually tilted mandibular molar: 3-D analysis using the finite element method (FEM)

Pubblicato online: 13 dic 2023

Pagine: 96 - 101

Ricevuto: 01 feb 2008

Accettato: 01 giu 2008

DOI: https://doi.org/10.2478/aoj-2008-0014

© 2008 Allahyar Geramy et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.