<abstract xmlns="http://www.w3.org/1999/xhtml">The influence of the sintering temperature on the structure and on the hysteresis loops of Fe3+ doped Pb(ZrxTi1-x)O3 system has been investigated. Three compositions have been selected in the following mode: one in rhombohedral region, one in MPB region and one in tetragonal region have been obtained by solid state reaction technique. Sintering has been carried out at 12000C and 12500C respectively. The nature of the phases has been investigated in detail using X-ray diffraction analysis (XRD). All the sintered samples reveal a perovskite type structure. The surfaces have been lapped and metalized in order to obtaine the hysteresis loops at room temperature. The results showed a similar behaviour with “hard” PZT ceramics.</abstract>

The influence of the sintering temperature on the structure and on the hysteresis loops of Fe3+ doped Pb(ZrxTi1-x)O3 system has been investigated. Three compositions have been selected in the following mode: one in rhombohedral region, one in MPB region and one in tetragonal region have been obtained by solid state reaction technique. Sintering has been carried out at 12000C and 12500C respectively. The nature of the phases has been investigated in detail using X-ray diffraction analysis (XRD). All the sintered samples reveal a perovskite type structure. The surfaces have been lapped and metalized in order to obtaine the hysteresis loops at room temperature. The results showed a similar behaviour with “hard” PZT ceramics.

Effects of Sintering Temperature on Structural and Electrical Properties of Fe3+ Doping PZT Ceramics

National Institute for Research & Development in Electrical Engineering ICPE-CA

University of Medicine, Pharmacy, Science and Technology”G.E.Palade”of Tîrgu Mures

Acta Marisiensis. Seria Technologica

This work is licensed under the Creative Commons Attribution 4.0 International License.

Effects of Sintering Temperature on Structural and Electrical Properties of Fe Doping PZT Ceramics

The influence of the sintering temperature on the structure and on the hysteresis loops of Fe3+ doped Pb(ZrxTi1-x)O3 system has been investigated. Three...

Effects of Sintering Temperature on Structural and Electrical Properties of Fe³⁺ Doping PZT Ceramics

Pubblicato online: 12 dic 2020

Pagine: 4 - 7

DOI: https://doi.org/10.2478/amset-2020-0012

Parole chiave
doped PZT, hard PZT, dielectric properties, piezoelectric properties

© 2020 Alina Iulia Dumitru et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Effects of Sintering Temperature on Structural and Electrical Properties of Fe3+ Doping PZT Ceramics

Pubblicato online: 12 dic 2020

Pagine: 4 - 7

DOI: https://doi.org/10.2478/amset-2020-0012

Parole chiavedoped PZT, hard PZT, dielectric properties, piezoelectric properties

© 2020 Alina Iulia Dumitru et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Effects of Sintering Temperature on Structural and Electrical Properties of Fe³⁺ Doping PZT Ceramics

Parole chiave
doped PZT, hard PZT, dielectric properties, piezoelectric properties