Based on the shortcomings of the current intelligent management of distribution networks, the article designs and implements a remote intelligent detection system for live distribution networks. The article constructs and realises an algorithm based on a genetic algorithm (GA) and agent system. The algorithm is applied to energy-saving intelligent supervision of equipment in the distribution network. The simulation experiment shows that the integrated algorithm based on GA and agent system can accurately detect power quality in real time. At the same time, the algorithm can monitor the energy consumption of equipment in the distribution network under multiple disturbances.

#### Keywords

- intelligent identification and judgement
- distribution network
- energy saving and consumption reduction
- monitoring management
- genetic algorithm

#### AMS 2010 codes

- 17D92

Energy conservation has become a long-term strategic policy for Chinese economic and social development, and power conservation is an integral part of the national energy conservation strategy. At present, the energysaving technology of enterprise distribution networks has the following shortcomings: 1) The entire distribution network lacks overall planning and management methods, and the energy management level is not high. At present, the distribution network has not formed an ‘all-round and multifaceted’ comprehensive energy saving and consumption reduction strategy. 2) The enterprise distribution network is only partially optimised and managed, which has significant limitations. 3) The energy-saving equipment of the enterprise power distribution network is still in a single operation. This has formed a situation of ‘isolated islands’, resulting in scattered information and low integration [1]. Such a situation is not convenient for high-level management and control. 4) The energy-saving equipment of a single independent node influences other nodes. Once the local regulation is excessive or insufficient, it causes the fault of the adjacent line to form a ‘critical area’. 5) A single energysaving device only has only a particular aspect of the energy-saving function, which cannot meet the needs of society for energy saving in all aspects. In addition, the independent control of energy-saving equipment quickly leads to too frequent equipment adjustments. The service life of power distribution equipment is shortened, and maintenance costs increase.

An agent is an entity that can perceive, solve problems and communicate with the outside world. A multiagent system (MAS) is a network structure composed of multiple loosely coupled, coarse-grained, perceptual, problem-solving agents that are able to communicate with other agents in the system. While taking into account the advantages of a single-agent system, MAS accomplishes complex control tasks or solves complex problems through negotiation, coordination and collaboration.

A genetic algorithm (GA) is an adaptive global optimisation algorithm formed by simulating living beings’ genetic and evolution processes in the natural environment. This paper combines the GA and the MAS technology to construct a multi-agent genetic optimisation algorithm, namely the GA-MAS. The algorithm uses the agent’s local perception, competition, cooperation and self-learning characteristics to achieve biological adaptation to the environment. Because all operations act instead of the entire population, the diversity of the population is maintained [2]. This suppresses the premature phenomenon of GAs to a certain extent.

Because of the above-mentioned shortcomings of the existing technology and its existing defects, we combined the GA and the MAS technology to propose a comprehensive management system for energy-saving and consumption-reducing distribution networks based on a multi-agent genetic optimisation algorithm, i.e. the GA-MAS. The article gives the basic structural model of the management system and the energy-saving equipment multi-agent structural model. The article uses the GA-MAS algorithm to get the best adjustment intensity of energy-saving equipment. This enables the energy-saving equipment to obtain the maximum energy-saving benefit with the minimum adjustment cost. The simulation of specific examples and practical engineering applications show that the management system proposed in this paper can reduce the total active power loss and the total number of capacitor input groups [3]. At the same time, this also shows that the GA-MAS algorithm has good computational efficiency and convergence stability.

In actual engineering applications, reactive power compensation devices inevitably produce active power loss and operation and maintenance costs. In addition, when the reactive power resources of the distribution network are insufficient, we need to add reactive power compensation equipment, which generates additional investment [4]. Therefore, the system needs to comprehensively consider the minimum total investment of the reactive power compensation device while pursuing the minimum active power loss to establish the objective function:
_{Ci}_{C}_{1}_{ij}_{ij}_{ij}_{ui}_{cost}_{n}_{n}

Objective function

Equality constraints

Inequality constraints
_{i}_{CiSVC}_{CiHAPF}_{CiIVC}_{CiDSTATCOM}_{i}_{Gi}

The multi-agent optimisation GA is an algorithm that combines the main features of the GA and MAS. We first construct the living environment of the Agent. Each Agent interacts with its neighbourhood [7]. Combined with the evolution mechanism of the GA, experiments enable it to converge to the optimal global solution quickly and accurately. We equate any agent α to a body in the GA. Its fitness value is as follows:

The purpose of Agent α is to reduce its fitness value as much as possible while meeting the constraints of the operating conditions. All agents are put into a living environment, i.e. an

The flowchart of the GA-MAS algorithm is shown in Figure 2.

Each Agent searches for the optimal solution according to its local environment and its neighbours. In the local environment of any agent, if the individual is better than other surrounding individuals, then the individual is the Paleto optimal solution in its neighbourhood [9]. Since selecting the best is performed in the local environment of each individual, it ensures the diversity of the group.

We assume that the two parents involved in mating are _{1,1}, ⋯,_{1,n}),_{1} = (_{2,1}, ⋯,_{2,n}), and the parent solution space is [_{p}, n_{p}

If the distance between the two points of the Agent corresponds to the distance of the objective function, let one of the agents die. Then a new agent is randomly generated in the domain to replace it. If an agent’s performance is worse than other agents in its neighbourhood, one will be randomly selected from the solution after Pareto’s selection.

According to the multi-agent hierarchical distributed system theory, the structural diagram of the integrated management system for energy saving and consumption reduction of a distribution network based on a multiagent setup is shown in Figure 3. The system includes two levels of multi-agents and management layers on the high-pressure side and low-pressure side.

The interaction and coordination of each Agent on the high-/low-voltage side are completed by the task coordination agent, and the task coordination agents can communicate with each other. Each Agent is connected to the management layer through the task decomposition agent, enabling different agents to connect to the corresponding management layer systems [10]. The various systems of the management layer are connected through the communication and interaction between the agents to realise the interconnection, interoperability and mutual coordination of the operating platform. The data of each system of the management layer can be accessed through Transmission Control Protocol/Internet Protocol (TCP/IP) protocol to achieve the purpose of data sharing and exchange. As a result, the various systems in the management layer connect the high-pressure-side multi-agents and the low-pressure-side multi-agents to realise the interaction and collaboration of the high- and low-pressure-side agents. This further realises multi-level energy saving and consumption reduction.

To verify the correctness and feasibility of the above algorithm, we use Pascal language to compile a programme in the Delphi environment to calculate and analyse the Institute of Electrical and Electronics Engineers (IEEE) 14-node system. In the IEEE 14-node system selected in this paper, we assume 14 nodes, six generators, four transformers and six energy-saving devices [11]. The transformer is regarded as an on-load tap-changing transformer, and the adjustment range of the transformer ratio is 1 ± 1.25% × 8. The gears are divided into 0–16 and 17 gears. We limit the primary adjustment gear position of the transformer to ±2 gears, and the conversion relationship between the gear position and the actual transformation ratio is

Tables 1 and 2 show the comparison results of energy saving and consumption reduction in distribution networks based on the GA-MAS optimisation algorithm and the particle swarm optimisation (PSO) algorithm. We use optimisation algorithms to solve the number of high- and low-voltage energy-saving equipment investment sets [12]. We find that the total active power loss is the smallest while satisfying the node voltage constraints. Such a control scheme is reasonable and achieves the optimal operation effect of the energy-saving equipment. In terms of node voltage control, generator active power output and voltage maximum and minimum distortion rate, the GA-MAS-based distribution network energy-saving and consumption-reducing system proposed in this paper has shown excellent results. Compared with the PSO algorithm, the GA-MAS optimisation algorithm reduces the total active power loss to 0.135 pu, while the PSO algorithm shows values as high as 0.138 pu. At the same time, the total investment in energy-saving equipment was reduced by two sets.

Comparison results of different optimisation algorithms

Compare items | PSO | GA-MAS |
---|---|---|

Maximum generator active power, pu | 1.998 | 1.972 |

Minimum generator active power, pu | 0.462 | 0.458 |

Maximum generator reactive power, pu | 0.245 | 0.102 |

Minimum generator reactive power, pu | 0.031 | 0.025 |

Maximum voltage distortion rate THDu, % | 4.02 | 3.63 |

Minimum voltage distortion rate THDu, % | 2.97 | 2.89 |

Maximum node voltage, pu | 1.085 | 1.05 |

Minimum node voltage, pu | 0.989 | 0.952 |

GA-MAS, genetic algorithm multi-agent system; PSO, particle swarm optimisation; pu, xxx; THDu, yyy.

Comparison of active power loss of different optimisation algorithms

Optimisation | Total active power loss, pu | Number of energy-saving equipment invested |
---|---|---|

0.138 | 5 | |

0.135 | 3 |

GA-MAS, genetic algorithm multi-agent system; PSO, particle swarm optimisation; pu, xxx.

Figure 4 shows the GA-MAS and PSO iterative curves. It can be seen from the figure that the convergence accuracy and speed of the GA-MAS algorithm are better than those of the PSO algorithm. In terms of algorithm calculation speed, the time optimised by GA-MAS and PSO is 16.3 s and 34.5 s, respectively. It can be seen that the calculation speed and convergence of GA-MAS are better than those of the PSO algorithm.

An enterprise’s power distribution network has one 110 kV substation, one self-provided thermal power plant and two 10 kV distribution substations. Among them are two sets of 25,000 kVA capacity 110 ± 8 × 1.25% on-load tapping transformers and two 110 kV lines. The distribution network was introduced from different substations to supply power to the plant. There were four on-load tapping transformers with a capacity of 6,300 kVA of 10 ± 8 × 1.25%, 143 circuits of 10 kV feeders, 256 circuits of 6 kV feeders and two generators sets of 6300 kVA. The system is connected to 16 sets of various types of high- and low-voltage energy-saving equipment. The energy-saving and consumption-reducing management system of distribution networks based on the GA-MAS proposed in this paper has been successfully applied to the enterprise distribution network. The energy-saving and consumption-reducing benefits produced by the system are as follows:

Reduction in the number of actions of the tap switch of the on-load tapping transformer: The transformer taps are reduced from 3.87 times per week before the system mentioned in this article is put into operation to 2.08 times per week per unit currently. The number of actions has been reduced by 46%. The investment in the system increases the service life of the equipment and reduces the labour intensity of maintenance.

Improvement in voltage quality: Figure 5 shows the voltage curve at the hour of the 110 kV node. It can be seen that the voltage of each node is significantly improved after using the integrated energy-saving and consumption-reducing system of the distribution network proposed in this paper. According to statistics, the qualification rate of busbar voltages >6 kV in the regional power grid within 3 months after the system was connected to operation was 99.96%.

This paper proposes an integrated management system for energy saving and consumption reduction in distribution networks based on a multi-agent genetic optimisation algorithm. The system uses the GA-MAS algorithm to obtain the best adjustment strength of each energy-saving equipment by comprehensively considering the factors that cause power loss in the distribution network. This enables the energy-saving equipment to obtain the maximum energy-saving benefit with the minimum adjustment cost. The GA-MAS algorithm constructs a MAS environment. Each Agent is equivalent to an individual in the GA. They interact with their domain in this environment. Combined with the evolution mechanism system of the GA, it can quickly and accurately converge to the optimal global solution. A specific calculation example shows that the management system proposed in this paper can reduce the total active power loss and the total number of capacitor input groups. At the same time, it shows that the GA-MAS algorithm has good calculation efficiency and convergence stability. The integrated management system for energy-saving and consumption reduction of distribution networks based on the GA-MAS algorithm proposed in this paper is of great significance to realising comprehensive energy-saving and consumption reduction of the distribution network in a comprehensive and multi-faceted manner.

#### Comparison of active power loss of different optimisation algorithms

Optimisation | Total active power loss, pu | Number of energy-saving equipment invested |
---|---|---|

0.138 | 5 | |

0.135 | 3 |

#### Comparison results of different optimisation algorithms

Compare items | PSO | GA-MAS |
---|---|---|

Maximum generator active power, pu | 1.998 | 1.972 |

Minimum generator active power, pu | 0.462 | 0.458 |

Maximum generator reactive power, pu | 0.245 | 0.102 |

Minimum generator reactive power, pu | 0.031 | 0.025 |

Maximum voltage distortion rate THDu, % | 4.02 | 3.63 |

Minimum voltage distortion rate THDu, % | 2.97 | 2.89 |

Maximum node voltage, pu | 1.085 | 1.05 |

Minimum node voltage, pu | 0.989 | 0.952 |

Law of interest rate changes in financial markets based on the differential equation model of liquidity Basalt fibre continuous reinforcement composite pavement reinforcement design based on finite element model Industrial transfer and regional economy coordination based on multiple regression model Satisfactory consistency judgement and inconsistency adjustment of linguistic judgement matrix Spatial–temporal graph neural network based on node attention A contrastive study on the production of double vowels in Mandarin Research of cascade averaging control in hydraulic equilibrium regulation of heating pipe network Mathematical analysis of civil litigation and empirical research of corporate governance Health monitoring of Bridges based on multifractal theory Health status diagnosis of the bridges based on multi-fractal de-trend fluctuation analysis Performance evaluation of college laboratories based on fusion of decision tree and BP neural network Application and risk assessment of the energy performance contracting model in energy conservation of public buildings Sensitivity analysis of design parameters of envelope enclosure performance in the dry-hot and dry-cold areas The Spatial Form of Digital Nonlinear Landscape Architecture Design Based on Computer Big Data Analysis of the relationship between industrial agglomeration and regional economic growth based on the multi-objective optimisation model Constraint effect of enterprise productivity based on constrained form variational computing The impact of urban expansion in Beijing and Metropolitan Area urban heat Island from 1999 to 2019 TOPSIS missile target selection method supported by the posterior probability of target recognition Ultrasonic wave promoting ice melt in ice storage tank based on polynomial fitting calculation model The incentive contract of subject librarians in university library under the non-linear task importance Application of Fuzzy Mathematics Calculation in Quantitative Evaluation of Students’ Performance of Basketball Jump Shot Visual error correction of continuous aerobics action images based on graph difference function Application of Higher Order Ordinary Differential Equation Model in Financial Investment Stock Price Forecast Application of Forced Modulation Function Mathematical Model in the Characteristic Research of Reflective Intensity Fibre Sensors Radioactive source search problem and optimisation model based on meta-heuristic algorithm Research on a method of completeness index based on complex model Fake online review recognition algorithm and optimisation research based on deep learning Research on the sustainable development and renewal of Macao inner harbour under the background of digitisation Support design of main retracement passage in fully mechanised coal mining face based on numerical simulation Study on the crushing mechanism and parameters of the two-flow crusher Interaction design of financial insurance products under the Era of AIoT Modeling the pathway of breast cancer in the Middle East Corporate social responsibility fulfilment, product-market competition and debt risk: Evidence from China ARMA analysis of the green innovation technology of core enterprises under the ecosystem – Time series data Reconstruction of multimodal aesthetic critical discourse analysis framework Image design and interaction technology based on Fourier inverse transform What does students’ experience of e-portfolios suggest Research on China interregional industrial transformation slowdown and influencing factors of industrial transformation based on numerical simulation The medical health venture capital network community structure, information dissemination and the cognitive proximity Data mining of Chain convenience stores location The optimal model of employment and entrepreneurship models in colleges and universities based on probability theory and statistics A generative design method of building layout generated by path Parameter Id of Metal Hi-pressure State Equation Analysis of the causes of the influence of the industrial economy on the social economy based on multiple linear regression equation Research of neural network for weld penetration control Intelligent Recommendation System for English Vocabulary Learning – Based on Crowdsensing Regarding new wave distributions of the non-linear integro-partial Ito differential and fifth-order integrable equations Research on predictive control of students’ performance in PE classes based on the mathematical model of multiple linear regression equation Beam control method for multi-array antennas based on improved genetic algorithm The influence of X fuzzy mathematical method on basketball tactics scoring Application of regression function model based on panel data in bank resource allocation financial risk management Research on aerobics training posture motion capture based on mathematical similarity matching statistical analysis Application of Sobolev-Volterra projection and finite element numerical analysis of integral differential equations in modern art design Influence of displacement ventilation on the distribution of pollutant concentrations in livestock housing Research on motion capture of dance training pose based on statistical analysis of mathematical similarity matching Application of data mining in basketball statistics Application of B-theory for numerical method of functional differential equations in the analysis of fair value in financial accounting Badminton players’ trajectory under numerical calculation method Research on the influence of fuzzy mathematics simulation model in the development of Wushu market Study on audio-visual family restoration of children with mental disorders based on the mathematical model of fuzzy comprehensive evaluation of differential equation Difference-in-differences test for micro effect of technological finance cooperation pilot in China Application of multi-attribute decision-making methods based on normal random variables in supply chain risk management Exploration on the collaborative relationship between government, industry, and university from the perspective of collaborative innovation The impact of financial repression on manufacturing upgrade based on fractional Fourier transform and probability AtanK-A New SVM Kernel for Classification Validity and reliability analysis of the Chinese version of planned happenstance career inventory based on mathematical statistics Visual positioning system for marine industrial robot assembly based on complex variable function Mechanical behaviour of continuous girder bridge with corrugated steel webs constructed by RW Research on the influencing factors of agricultural product purchase willingness in social e-commerce situation Study of a linear-physical-programming-based approach for web service selection under uncertain service quality A mathematical model of plasmid-carried antibiotic resistance transmission in two types of cells Burnout of front-line city administrative law-enforcing personnel in new urban development areas: An empirical research in China Calculating university education model based on finite element fractional differential equations and macro-control analysis Educational research on mathematics differential equation to simulate the model of children's mental health prevention and control system Analysis of enterprise management technology and innovation based on multilinear regression model Verifying the validity of the whole person model of mental health education activities in colleges based on differential equation RETRACTION NOTE Innovations to Attribute Reduction of Covering Decision System Based on Conditional Information Entropy Research on the mining of ideological and political knowledge elements in college courses based on the combination of LDA model and Apriori algorithm Adoption of deep learning Markov model combined with copula function in portfolio risk measurement Good congruences on weakly U-abundant semigroups Research on the processing method of multi-source heterogeneous data in the intelligent agriculture cloud platform Mathematical simulation analysis of optimal detection of shot-putters’ best path Internal control index and enterprise growth: An empirical study of Chinese listed-companies in the automobile manufacturing industry Determination of the minimum distance between vibration source and fibre under existing optical vibration signals: a study Nonlinear differential equations based on the B-S-M model in the pricing of derivatives in financial markets Nonlinear Differential Equations in the Teaching Model of Educational Informatisation Fed-UserPro: A user profile construction method based on federated learning The evaluation of college students’ innovation and entrepreneurship ability based on nonlinear model Smart Communities to Reduce Earthquake Damage: A Case Study in Xinheyuan, China Response Model of Teachers’ Psychological Education in Colleges and Universities Based on Nonlinear Finite Element Equations Institutional investor company social responsibility report and company performance Mathematical analysis of China's birth rate and research on the urgency of deepening the reform of art education First-principles calculations of magnetic and mechanical properties of Fe-based nanocrystalline alloy Fe _{80}Si_{10}Nb_{6}B_{2}Cu_{2}The Effect of Children’s Innovative Education Courses Based on Fractional Differential Equations Fractional Differential Equations in the Standard Construction Model of the Educational Application of the Internet of Things Optimization in Mathematics Modeling and Processing of New Type Silicate Glass Ceramics Has the belt and road initiative boosted the resident consumption in cities along the domestic route? – evidence from credit card consumption MCM of Student’s Physical Health Based on Mathematical Cone Attitude control for the rigid spacecraft with the improved extended state observer Sports health quantification method and system implementation based on multiple thermal physiology simulation Research on visual optimization design of machine–machine interface for mechanical industrial equipment based on nonlinear partial equations Research on identifying psychological health problems of college students by logistic regression model based on data mining Abnormal Behavior of Fractional Differential Equations in Processing Computer Big Data Mathematical Modeling Thoughts and Methods Based on Fractional Differential Equations in Teaching A mathematical model of PCNN for image fusion with non-sampled contourlet transform Nonlinear Differential Equations in Computer-Aided Modeling of Big Data Technology The Uniqueness of Solutions of Fractional Differential Equations in University Mathematics Teaching Based on the Principle of Compression Mapping Influence of displacement ventilation on the distribution of pollutant concentrations in livestock housing Cognitive Computational Model Using Machine Learning Algorithm in Artificial Intelligence Environment Application of Higher-Order Ordinary Differential Equation Model in Financial Investment Stock Price Forecast Recognition of Electrical Control System of Flexible Manipulator Based on Transfer Function Estimation Method Automatic Knowledge Integration Method of English Translation Corpus Based on Kmeans Algorithm Real Estate Economic Development Based on Logarithmic Growth Function Model Informatisation of educational reform based on fractional differential equations Financial Crisis Early Warning Model of Listed Companies Based on Fisher Linear Discriminant Analysis Research on the control of quantitative economic management variables under the numerical method based on stochastic ordinary differential equations Network monitoring and processing accuracy of big data acquisition based on mathematical model of fractional differential equation 3D Animation Simulation of Computer Fractal and Fractal Technology Combined with Diamond-Square Algorithm The Summation of Series Based on the Laplace Transformation Method in Mathematics Teaching Optimal Solution of the Fractional Differential Equation to Solve the Bending Performance Test of Corroded Reinforced Concrete Beams under Prestressed Fatigue Load Radial Basis Function Neural Network in Vibration Control of Civil Engineering Structure Optimal Model Combination of Cross-border E-commerce Platform Operation Based on Fractional Differential Equations Research on Stability of Time-delay Force Feedback Teleoperation System Based on Scattering Matrix BIM Building HVAC Energy Saving Technology Based on Fractional Differential Equation Human Resource Management Model of Large Companies Based on Mathematical Statistics Equations Data Forecasting of Air-Conditioning Load in Large Shopping Malls Based on Multiple Nonlinear Regression System dynamics model of output of ball mill Optimisation of Modelling of Finite Element Differential Equations with Modern Art Design Theory Mathematical function data model analysis and synthesis system based on short-term human movement Sensitivity Analysis of the Waterproof Performance of Elastic Rubber Gasket in Shield Tunnel Human gait modelling and tracking based on motion functionalisation Analysis and synthesis of function data of human movement The Control Relationship Between the Enterprise's Electrical Equipment and Mechanical Equipment Based on Graph Theory Financial Accounting Measurement Model Based on Numerical Analysis of Rigid Normal Differential Equation and Rigid Functional Equation Mathematical Modeling and Forecasting of Economic Variables Based on Linear Regression Statistics Design of Morlet wavelet neural network to solve the non-linear influenza disease system Nonlinear Differential Equations in Cross-border E-commerce Controlling Return Rate Differential equation model of financial market stability based on Internet big data 3D Mathematical Modeling Technology in Visualized Aerobics Dance Rehearsal System Children’s cognitive function and mental health based on finite element nonlinear mathematical model Motion about equilibrium points in the Jupiter-Europa system with oblateness Fractional Differential Equations in Electronic Information Models Badminton players’ trajectory under numerical calculation method BIM Engineering Management Oriented to Curve Equation Model Optimal preview repetitive control for impulse-free continuous-time descriptor systems Development of main functional modules for MVB and its application in rail transit Study on the impact of forest fire prevention policy on the health of forest resources Mathematical Method to Construct the Linear Programming of Football Training The Size of Children's Strollers of Different Ages Based on Ergonomic Mathematics Design Stiffness Calculation of Gear Hydraulic System Based on the Modeling of Nonlinear Dynamics Differential Equations in the Progressive Method Relationship Between Enterprise Talent Management and Performance Based on the Structural Equation Model Method Value Creation of Real Estate Company Spin-off Property Service Company Listing Selection by differential mortality rates Digital model creation and image meticulous processing based on variational partial differential equation Dichotomy model based on the finite element differential equation in the educational informatisation teaching reform model Nonlinear Dissipative System Mathematical Equations in the Multi-regression Model of Information-based Teaching The modelling and implementation of the virtual 3D animation scene based on the geometric centre-of-mass algorithm The policy efficiency evaluation of the Beijing–Tianjin–Hebei regional government guidance fund based on the entropy method The transfer of stylised artistic images in eye movement experiments based on fuzzy differential equations Research on behavioural differences in the processing of tenant listing information: An eye-movement experiment A review of the treatment techniques of VOC Some classes of complete permutation polynomials in the form of ( x ^{pm}−x +δ )^{s}+ax ^{pm}+bx overF _{p2m}The consistency method of linguistic information and other four preference information in group decision-making Research on the willingness of Forest Land’s Management Rights transfer under the Beijing Forestry Development A mathematical model of the fractional differential method for structural design dynamics simulation of lower limb force movement step structure based on Sanda movement Fractal structure of magnetic island in tokamak plasma Numerical calculation and study of differential equations of muscle movement velocity based on martial articulation body ligament tension Study on the maximum value of flight distance based on the fractional differential equation for calculating the best path of shot put Sports intensity and energy consumption based on fractional linear regression equation Analysis of the properties of matrix rank and the relationship between matrix rank and matrix operations Study on Establishment and Improvement Strategy of Aviation Equipment Research on Financial Risk Early Warning of Listed Companies Based on Stochastic Effect Mode Characteristics of Mathematical Statistics Model of Student Emotion in College Physical Education Mathematical Calculus Modeling in Improving the Teaching Performance of Shot Put Application of Nonlinear Differential Equation in Electric Automation Control System Nonlinear strategic human resource management based on organisational mathematical model Higher Mathematics Teaching Curriculum Model Based on Lagrangian Mathematical Model Optimization of Color Matching Technology in Cultural Industry by Fractional Differential Equations The Marketing of Cross-border E-commerce Enterprises in Foreign Trade Based on the Statistics of Mathematical Probability Theory The Evolution Model of Regional Tourism Economic Development Difference Based on Spatial Variation Function The Inner Relationship between Students' Psychological Factors and Physical Exercise Based on Structural Equation Model (SEM) Fractional Differential Equations in Sports Training in Universities Higher Education Agglomeration Promoting Innovation and Entrepreneurship Based on Spatial Dubin Model