Application of 3D Printing Technology in Customized Garment Production

In this paper, human body images are acquired by DSLR camera shooting, and the photos are grayscaled based on the HIS model. Then, the different operations weaken the similar parts between the images, and the other parts of the photos are highlighted. The image is separated from the background by image binarization. After the contour detection of the image, the pixel coordinates of the contour points in the image are deposited into a dynamic array by the size judgment of the pixel values. The subsequent size calculation is called to make a pad. According to the human body, clothing size automation measurement has been derived from the human body characteristics of the size, the use of three-dimensional printing technology to produce clothing to meet consumer demand, and three-dimensional printing technology to support the production of customized clothing under the experimental analysis. It is verified that the data difference between the actual size of the subject’s ready-made clothes and the size of the clothes produced based on 3D printing technology is kept within ±0.48cm. The virtual fitting pressure is less than the comfort threshold of women’s upper body pressure (2.75kpa), which indicates that the clothes produced by this research will not cause physiological discomfort to the human body and, at the same time, meet the consumer’s personalized clothing customization needs.