<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The paper presents new concepts of the identification method based on modulating functions and exact state observers with its application for identification of a real continuous-time industrial process. The method enables transformation of a system of differential equations into an algebraic one with the same parameters. Then, these parameters can be estimated using the least-squares approach. The main problem is the nonlinearity of the MISO process and its noticeable transport delays. It requires specific modifications to be introduced into the basic identification algorithm. The main goal of the method is to obtain on-line a temporary linear model of the process around the selected operating point, because fast methods for tuning PID controller parameters for such a model are well known. Hence, a special adaptive identification approach with a moving window is proposed, which involves using on-line registered input and output process data. An optimal identification method for a MISO model assuming decomposition to many inner SISO systems is presented. Additionally, a special version of the modulating functions method, in which both model parameters and unknown delays are identified, is tested on real data sets collected from a glass melting installation.</p></abstract>

The paper presents new concepts of the identification method based on modulating functions and exact state observers with its application for identification of a real continuous-time industrial process. The method enables transformation of a system of differential equations into an algebraic one with the same parameters. Then, these parameters can be estimated using the least-squares approach. The main problem is the nonlinearity of the MISO process and its noticeable transport delays. It requires specific modifications to be introduced into the basic identification algorithm. The main goal of the method is to obtain on-line a temporary linear model of the process around the selected operating point, because fast methods for tuning PID controller parameters for such a model are well known. Hence, a special adaptive identification approach with a moving window is proposed, which involves using on-line registered input and output process data. An optimal identification method for a MISO model assuming decomposition to many inner SISO systems is presented. Additionally, a special version of the modulating functions method, in which both model parameters and unknown delays are identified, is tested on real data sets collected from a glass melting installation.

An Adaptive Identification Method Based on the Modulating Functions Technique and Exact State Observers for Modeling and Simulation of a Nonlinear Miso Glass Melting Process

Department of Automatic Control and Robotics

International Journal of Applied Mathematics and Computer Science

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

The paper presents new concepts of the identification method based on modulating functions and exact state observers with its application for identification of...

An Adaptive Identification Method Based on the Modulating Functions Technique and Exact State Observers for Modeling and Simulation of a Nonlinear Miso Glass Melting Process

Pubblicato online: 31 dic 2019

Pagine: 739 - 757

Ricevuto: 18 dic 2018

Accettato: 18 ago 2019

DOI: https://doi.org/10.2478/amcs-2019-0055

Parole chiave
continuous systems, modulating functions, system identification, exact state observer, glass forehearths

© 2019 Witold Byrski et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

An Adaptive Identification Method Based on the Modulating Functions Technique and Exact State Observers for Modeling and Simulation of a Nonlinear Miso Glass Melting Process

Pubblicato online: 31 dic 2019

Pagine: 739 - 757

Ricevuto: 18 dic 2018

Accettato: 18 ago 2019

DOI: https://doi.org/10.2478/amcs-2019-0055

Parole chiavecontinuous systems, modulating functions, system identification, exact state observer, glass forehearths

© 2019 Witold Byrski et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Parole chiave
continuous systems, modulating functions, system identification, exact state observer, glass forehearths