<abstract xmlns="http://www.w3.org/1999/xhtml"><p>In modern orthodontics, thermally activated archwires are used more widely in clinical practice, because they have unique properties like superelasticity and bio-compatibility. The aim of the present study was to characterize commercial 35° C Cu-NiTi archwires in terms of their phase transition behavior, chemical composition, surface topography properties after clinical usage, as well as the influence of the autoclaving process. Materials and methods. 35° C Thermo-Active Copper NiTi (CuNiTi) of ORMCO, Glendora, CA, USA (as-received, as-received autoclaved and clinically retrieved) with rectangular cross-section and dimension 0.016x0.022 inch, were investigated. The physicochemical research was conducted via Differential Scanning Calorimetry (DSC), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDX) and X-ray Diffraction Analysis (XRD). The autoclaving was done in Runyes model B autoclave. Results. The DSC results revealed the austenite start (9.8° C; 26.47° C) and austenite finish (28° C; 31.74° C) temperatures for the as-received and autoclaved archwires respectively. For clinically retrieved samples the austenite finish temperature (Af) is around 27° C. The XRD patterns of the as-received and clinically retrieved samples show almost identical diffraction patterns. Rough surface of the CuNiTi alloy was revealed by the SEM analysis. Autoclaving process seems to have no effects on archwires’ structure and chemical composition. Chemical content of the investigated as-received CuNiTi are Ni, Ti and Cu: 47.07 wt% and 46.81 wt% and 6.11 wt%, respectively. The autoclaving process seems to have little influence on the transition temperature. The results from our study showed little difference (~7 °C) in the finish transition temperatures (Af), compared to the manufacturer’s claim. No intermediate R phase was detected by DSC. Conclusion. A good knowledge of the structural changes that occur in CuNiTi alloys in the oral cavity is useful for the orthodontists in order to optimize orthodontic treatment.</p></abstract>

In modern orthodontics, thermally activated archwires are used more widely in clinical practice, because they have unique properties like superelasticity and bio-compatibility. The aim of the present study was to characterize commercial 35° C Cu-NiTi archwires in terms of their phase transition behavior, chemical composition, surface topography properties after clinical usage, as well as the influence of the autoclaving process. Materials and methods. 35° C Thermo-Active Copper NiTi (CuNiTi) of ORMCO, Glendora, CA, USA (as-received, as-received autoclaved and clinically retrieved) with rectangular cross-section and dimension 0.016x0.022 inch, were investigated. The physicochemical research was conducted via Differential Scanning Calorimetry (DSC), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDX) and X-ray Diffraction Analysis (XRD). The autoclaving was done in Runyes model B autoclave. Results. The DSC results revealed the austenite start (9.8° C; 26.47° C) and austenite finish (28° C; 31.74° C) temperatures for the as-received and autoclaved archwires respectively. For clinically retrieved samples the austenite finish temperature (Af) is around 27° C. The XRD patterns of the as-received and clinically retrieved samples show almost identical diffraction patterns. Rough surface of the CuNiTi alloy was revealed by the SEM analysis. Autoclaving process seems to have no effects on archwires’ structure and chemical composition. Chemical content of the investigated as-received CuNiTi are Ni, Ti and Cu: 47.07 wt% and 46.81 wt% and 6.11 wt%, respectively. The autoclaving process seems to have little influence on the transition temperature. The results from our study showed little difference (~7 °C) in the finish transition temperatures (Af), compared to the manufacturer’s claim. No intermediate R phase was detected by DSC. Conclusion. A good knowledge of the structural changes that occur in CuNiTi alloys in the oral cavity is useful for the orthodontists in order to optimize orthodontic treatment.

Physicochemical Research of Clinically Retrieved CU-NI-TI Orthodontic Archwires

Tallinn University of Technology – Tallinn

Acta Medica Bulgarica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

{"article-title":"Physicochemical Research of Clinically Retrieved CU-NI-TI Orthodontic Archwires"}

In modern orthodontics, thermally activated archwires are used more widely in clinical practice, because they have unique properties like superelasticity and...

Physicochemical Research of Clinically Retrieved CU-NI-TI Orthodontic Archwires

Pubblicato online: 05 mag 2021

Pagine: 68 - 74

Accettato: 15 dic 2019

DOI: https://doi.org/10.2478/amb-2021-0011

Parole chiave
35 °C Thermo-Active Copper NiTi (CuNiTi), Autoclaving process, DSC, XRD, SEM, EDX

© 2021 A. Stoyanova-Ivanova et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Physicochemical Research of Clinically Retrieved CU-NI-TI Orthodontic Archwires

Pubblicato online: 05 mag 2021

Pagine: 68 - 74

Accettato: 15 dic 2019

DOI: https://doi.org/10.2478/amb-2021-0011

Parole chiave35 °C Thermo-Active Copper NiTi (CuNiTi), Autoclaving process, DSC, XRD, SEM, EDX

© 2021 A. Stoyanova-Ivanova et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Parole chiave
35 °C Thermo-Active Copper NiTi (CuNiTi), Autoclaving process, DSC, XRD, SEM, EDX