<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The aim of this paper was to create a computational model that will enable the evaluation of the operation of a conventional inertia accumulator. This is an issue that is relevant as storage of energy is becoming increasingly important, in particular when it comes to generating electricity from renewable sources. In the course of the conducted works, an analytical model was developed based on the available literature, and then, it was introduced into the environment for numerical calculations. Four variants resulting from different geometrical parameters of the flywheel were adopted successively. On this basis, a series of simulations were performed, which allowed for obtaining the characteristics of the analysed solutions. As a consequence, a number of characteristics related to the mechanical power and energy of the simulated kinetic energy accumulators were obtained. The test results therefore provide a basis for comparing kinetic energy accumulators with different geometries and drive solutions.</p>
</abstract>

The aim of this paper was to create a computational model that will enable the evaluation of the operation of a conventional inertia accumulator. This is an issue that is relevant as storage of energy is becoming increasingly important, in particular when it comes to generating electricity from renewable sources. In the course of the conducted works, an analytical model was developed based on the available literature, and then, it was introduced into the environment for numerical calculations. Four variants resulting from different geometrical parameters of the flywheel were adopted successively. On this basis, a series of simulations were performed, which allowed for obtaining the characteristics of the analysed solutions. As a consequence, a number of characteristics related to the mechanical power and energy of the simulated kinetic energy accumulators were obtained. The test results therefore provide a basis for comparing kinetic energy accumulators with different geometries and drive solutions.

Numerical Model and an Analysis of Inertial Accumulator Operation Under Selected Working Conditions

Acta Mechanica et Automatica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The aim of this paper was to create a computational model that will enable the evaluation of the operation of a conventional inertia accumulator. This is an...

Numerical Model and an Analysis of Inertial Accumulator Operation Under Selected Working Conditions

Pubblicato online: 25 set 2022

Pagine: 286 - 291

Ricevuto: 22 mag 2022

Accettato: 22 ago 2022

DOI: https://doi.org/10.2478/ama-2022-0034

Parole chiave
mechanical energy accumulator, flywheel, inertial accumulator, numerical simulations, non-conventional technical solutions

© 2022 Mateusz Kukla et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Numerical Model and an Analysis of Inertial Accumulator Operation Under Selected Working Conditions

Pubblicato online: 25 set 2022

Pagine: 286 - 291

Ricevuto: 22 mag 2022

Accettato: 22 ago 2022

DOI: https://doi.org/10.2478/ama-2022-0034

Parole chiavemechanical energy accumulator, flywheel, inertial accumulator, numerical simulations, non-conventional technical solutions

© 2022 Mateusz Kukla et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Parole chiave
mechanical energy accumulator, flywheel, inertial accumulator, numerical simulations, non-conventional technical solutions