[
1. Thomas, W.; Nicholas, E.; Needham, J.; Murch, M.; Temple-Smith, P.; Dawes, C. Friction stir butt welding, international patent application no. PCT/GB92 Patent application 1991.
]Search in Google Scholar
[
2. Thomas, W.; Wiesner, C.; Marks, D.; Staines, D. Conventional and bobbin friction stir welding of 12% chromium alloy steel using composite refractory tool materials. Science and Technology of Welding and Joining, 2009, 14, 247-253.
]Search in Google Scholar
[
3. Threadgill, P.; Leonard, A.; Shercliff, H.; Withers, P. Friction stir welding of aluminium alloys. International Materials Reviews, 2009, 54, 49-93.
]Search in Google Scholar
[
4. Threadgill, P.L.; Ahmed, M.; Martin, J.P.; Perrett, J.G.; Wynne, B.P. The use of bobbin tools for friction stir welding of aluminium alloys, Materials Science Forum, 638 2010 1179-1184.10.4028/www.scientific.net/MSF.638-642.1179
]Search in Google Scholar
[
5. Colligan, K. Material flow behavior during friction welding of aluminum. Welding Journal, 1999, 75, 229-237.
]Search in Google Scholar
[
6. Hilgert, J.; Dos Santos, J.; Huber, N. Shear layer modelling for bobbin tool friction stir welding. Science and Technology of Welding and Joining, 2012, 17, 454-459.
]Search in Google Scholar
[
7. Hilgert, J.; Hütsch, L.L.; dos Santos, J.; Huber, N. Material flow around a bobbin tool for friction stir welding, Excerpt from the Proceedings of the COMSOL Conference, 2010.
]Search in Google Scholar
[
8. Hilgert, J.; Schmidt, H.; Dos Santos, J.; Huber, N. Thermal models for bobbin tool friction stir welding. Journal of Materials Processing Technology, 2011, 211, 197-204.
]Search in Google Scholar
[
9. Cui, L.; Yang, X.; Zhou, G.; Xu, X.; Shen, Z. Characteristics of defects and tensile behaviors on friction stir welded AA6061-T4 T-joints. Materials Science and Engineering: A, 2012, 543, 58-68.
]Search in Google Scholar
[
10. Durga, B.S. Research scholar optimization of friction stir welding parameters (tool material, tool geometry and tool speed) on aluminium alloys 6061 using Taguchi method. Advanced Research Journals of Science and Technology 2018, 5, 385-407.
]Search in Google Scholar
[
11. Dialami, N.; Chiumenti, M.; Cervera, M.; Agelet de Saracibar, C.; Ponthot, J.P. Material flow visualization in friction stir welding via particle tracing. International Journal of Material Forming, 2015, 8, 167-181.
]Search in Google Scholar
[
12. Dialami, N.; Cervera, M.; Chiumenti, M. Effect of the tool tilt angle on the heat generation and the material flow in friction stir welding. Metals, 2019, 9, 28.10.3390/met9010028
]Search in Google Scholar
[
13. He, X.; Gu, F.; Ball, A. A review of numerical analysis of friction stir welding. Progress in Materials Science 2014, 65, 1-66.
]Search in Google Scholar
[
14. Hasan, A.F.; Bennett, C.J.; Shipway, P.H. A numerical comparison of the flow behaviour in friction stir welding (FSW) using unworn and worn tool geometries. Materials & Design, 2015, 87, 1037-1046.
]Search in Google Scholar
[
15. Egea, A.S.; Rodriguez, A.; Celentano, D.; Calleja, A.; de Lacalle, L.L. Joining metrics enhancement when combining FSW and ball-burnishing in a 2050 aluminium alloy. Surface and Coatings Technology, 2019, 367, 327-335.
]Search in Google Scholar
[
16. Sued, M.; Pons, D.; Lavroff, J.; Wong, E.-H. Design features for bobbin friction stir welding tools: Development of a conceptual model linking the underlying physics to the production process. Materials & Design, 2014, 54, 632-643.
]Search in Google Scholar
[
17. Thomas, W.; Nicholas, E. Friction stir welding for the transportation industries. Materials & Design, 1997, 18, 269-273.
]Search in Google Scholar
[
18. Wang, G.-Q.; Zhao, Y.-H.; Tang, Y.-Y. Research progress of bobbin tool friction stir welding of aluminum alloys: A review. Acta Metallurgica Sinica (English Letters), 2020, 33(1), 1-17.10.1007/s40195-019-00946-8
]Search in Google Scholar
[
19. Fuse, K.; Badheka, V. Bobbin tool friction stir welding: A review. Science and Technology of Welding and Joining, 2019, 24, 277-304.
]Search in Google Scholar
[
20. Gadakh, V.S.; Adepu, K. Heat generation model for taper cylindrical pin profile in FSW. Journal of Materials Research and Technology, 2013, 2, 370-375.
]Search in Google Scholar
[
21. Tamadon, A.; Pons, D.; Sued, K.; Clucas, D. Development of metallographic etchants for the microstructure evolution of A6082-T6 BFSW welds. Metals, 2017, 7, 423.10.3390/met7100423
]Search in Google Scholar
[
22. Tamadon, A.; Pons, D.J.; Clucas, D.; Sued, K. Internal material flow layers in AA6082-T6 butt-joints during bobbin friction stir welding. Metals, 2019, 9, 1059.
]Search in Google Scholar
[
23. Sued, M.K. Fixed bobbin friction stir welding of marine grade aluminium. Ph.D. Thesis, University of Canterbury, Christchurch, New Zealand, 2015.
]Search in Google Scholar
[
24. Tamadon, A.; Pons, D.J.; Clucas, D.; Sued, K. Texture evolution in AA6082-T6 BFSW welds: Optical microscopy and EBSD characterisation. Materials, 2019, 12, 3215.
]Search in Google Scholar
[
25. Tamadon, A.; Pons, D.; Sued, K.; Clucas, D. Thermomechanical grain refinement in AA6082-T6 thin plates under bobbin friction stir welding. Metals, 2018, 8, 375.10.3390/met8060375
]Search in Google Scholar
[
26. Chen, S.; Lu, A.; Yang, D.; Lu, S.; Dong, J.; Dong, C. In: Analysis on flow pattern of bobbin tool friction stir welding for 6082 aluminum, Proceedings of the 1st International joint symposium on joining and welding, 2013; Elsevier: 353-358.10.1533/978-1-78242-164-1.353
]Search in Google Scholar
[
27. Tamadon, A.; Baghestani, A.; Bajgholi, M.E. Influence of WC-based pin tool profile on microstructure and mechanical properties of AA1100 FSW welds. Technologies, 2020, 8, 34.10.3390/technologies8020034
]Search in Google Scholar
[
28. Kerrar, G.; Merah, N.; Shuaib, A.N.; Fadi, A.-B.; Bazoune, A. Experimental and numerical investigations of friction stir welding of aluminum to copper. In: Applied mechanics, behavior of materials, and engineering systems, Springer: 2017; 129-138.10.1007/978-3-319-41468-3_10
]Search in Google Scholar
[
29. Tamadon, A.; Pons, D.; Sued, K.; Clucas, D. Formation mechanisms for entry and exit defects in bobbin friction stir welding. Metals, 2018, 8, 33.10.3390/met8010033
]Search in Google Scholar
[
30. Tamadon, A. Characterization of flow-based bobbin friction stir welding process. Ph.D. Thesis, University of Canterbury, Christchurch, New Zealand, 2019.
]Search in Google Scholar
[
31. Tamadon, A.; Pons, D.; Clucas, D. Analogue modelling of flow patterns in bobbin friction stir welding by the dark-field/bright-field illumination method. Advances in Materials Science, 2020, 20, 56-70.
]Search in Google Scholar
[
32. Tamadon, A.; Pons, D.J.; Clucas, D. Structural anatomy of tunnel void defect in bobbin friction stir welding, elucidated by the analogue modelling. Applied System Innovation, 2020, 3, 2.10.3390/asi3010002
]Search in Google Scholar
[
33. Tamadon, A.; Pons, D.J.; Clucas, D. Flow-based anatomy of bobbin friction-stirred weld; AA6082-T6 aluminium plate and analogue plasticine model. Applied Mechanics, 2020, 1, 3-19.
]Search in Google Scholar
[
34. Krishnan, K. On the formation of onion rings in friction stir welds. Materials Science and Engineering: A, 2002, 327, 246-251.10.1016/S0921-5093(01)01474-5
]Search in Google Scholar
[
35. Teimournezhad, J.; Masoumi, A. Experimental investigation of onion ring structure formation in friction stir butt welds of copper plates produced by non-threaded tool pin. Science and Technology of Welding and Joining, 2010, 15, 166-170.
]Search in Google Scholar
[
36. Tamadon, A.; Pons, D.; Chakradhar, K.; Kamboj, J.; Clucas, D.; Clucas, D. 3D-printed tool shoulder design for the analogue modelling of bobbin friction stir weld joint quality. Advances in Materials Science, 2021, 21, 27-42.
]Search in Google Scholar
[
37. Tamadon, A.; Pons, D.; Clucas, D. EBSD characterization of bobbin friction stir welding of AA6082-T6 aluminium alloy. Advances in Materials Science, 2020, 20, 49-74.
]Search in Google Scholar
[
38. Tamadon, A.; Pons, D.J.; Clucas, D. AFM characterization of stir-induced micro-flow features within the AA6082-T6 BFSW welds. Technologies, 2019, 7, 80.10.3390/technologies7040080
]Search in Google Scholar
