Synthesis of SrTiO₃ Nanopowder by Sol-Gel-Hydrothemal Method for Gas Sensing Application

[1]X. G. Peng, L. Manna, W. D. Yang, J. Wickham, E. Scher, A. Kadavanich, A. P. Alivisatos, “Shape control of CdSe nanocrystals”, Nature, Vol. 404, No. 6773, March 2000, pp. 59-61. Search in Google Scholar

[2]M. Cardona, “Optical Properties and Band Structure of SrTiO₃ and BaTiO₃”, Physical Review, Vol. 140, No. 2A, 1965, pp. 651-655.10.1103/PhysRev.140.A651 Search in Google Scholar

[3]C. L. Jia, K. Urban, S. Hoffmann, R. J. Waser, “Microstructure of columnar-grained SrTiO₃ and BaTiO₃ thin films prepared by chemical solution deposition” Journal of Materials Research Vol. 13, No. 08, 1998, 2206-2217.10.1557/JMR.1998.0309 Search in Google Scholar

[4]J. H. Haeni, P. Irvin, W. Chang, R. Uecker, P. Reiche, Y.L. Li, S. Choudhury, W. Tian, M.E. Hawley, B. Craigo, A.K. Tagantsev, X.Q. Pan, S.K. Streiffer, L.Q. Chen, S.W. Kirchoefer, J. Levy, D.G. Schlom, “Room-temperature ferroelectricity in strained SrTiO₃”, Nature, Vol. 430, No. 7001, August 2004, pp. 758-761. Search in Google Scholar

[5]P. Balaya, M. Ahrens, L. Kienle, J. Maier, B. Rahmati, S.B. Lee, W. Sigle, A. Pashkin, C. Kuntscher, M. Dressel, “Synthesis and Characterization of Nanocrystalline SrTiO₃” J. Am. Ceram. Soc. Vol. 89, No. 09, September 2006, pp. 2804-2811.10.1111/j.1551-2916.2006.01133.x Search in Google Scholar

[6]Y. Hu, O.K. Tan, J.S. Pan, H. Huang, W. Cao, “The effects of annealing temperature on the sensing properties of low temperature nano-sized SrTiO₃ oxygen gas sensor”, Sens. Actuators B, Vol. 108, No. 1-2, July 2005, pp. 244-249.10.1016/j.snb.2004.10.053 Search in Google Scholar

[7]T. Hara, T. Ishiguro, “Oxygen sensitivity of SrTiO₃ thin film prepared using atomic layer deposition”, Sens. Actuators B, Vol. 136, No. 02, March 2009, pp. 489-493.10.1016/j.snb.2008.12.026 Search in Google Scholar

[8]S. Burnside, J.E. Moser, K. Brooks, M. Gratzel, D.J. Cahen, “Nanocrystalline Mesoporous Strontium Titanate as Photoelectrode Material for Photosensitized Solar Devices: Increasing Photovoltage through Flatband Potential Engineering”, J. Phys. Chem. B, Vol. 103, No. 43 August 1999, pp. 9328-9332.10.1021/jp9913867 Search in Google Scholar

[9]L. Pellegrino, I. Pallecchi, D. Marre, E. Bellingeri, S. Siri, “Fabrication of submicron-scale SrTiO₃-δ devices by an atomic force microscope” Appl. Phys. Lett. Vol. 81, No. 20, November 2002, pp. 3849-3851.10.1063/1.1521583 Search in Google Scholar

[10]M.L. Moreira, J. Andres, V.M. Longo, M.S. Li, J.A. Varela, E. Longo, “Photoluminescent behavior of SrZrO₃/SrTiO₃ multilayer thin films”, Chem. Phys. Lett. Vol. 473, No. 4-6, May 2009, pp. 293-298.10.1016/j.cplett.2009.03.021 Search in Google Scholar

[11]K. Domen, A. Kudo, T. Onishi, N. Kosugi, H. Kuroda, “Photocatalytic decomposition of water into hydrogen and oxygen over nickel(II) oxide-strontium titanate (SrTiO₃) powder. 1. Structure of the catalysts “, J. Phys. Chem. Vol. 90, No. 02, January 1986, pp. 292-295.10.1021/j100274a018 Search in Google Scholar

[12]M.S. Wrighton, A.B. Ellis, P.T. Wolczanski, D.L. Morse, H.B. Abrahamson, D.S. Ginley, “Strontium titanate photoelectrodes. Efficient photoassisted electrolysis of water at zero applied potential”, J. Am. Chem. Soc. Vol. 98, No. 10, May 1976, pp. 2774 -2779.10.1021/ja00426a017 Search in Google Scholar

[13]S. Burnside, J.E. Moser, K. Brooks, M.J. Gratzel, “Nanocrystalline Mesoporous Strontium Titanate as Photoelectrode Material for Photosensitized Solar Devices: Increasing Photovoltage through Flatband Potential Engineering”, Phys. Chem. B, Vol. 103, No. 43, August 1999 pp. 9328-9332.10.1021/jp9913867 Search in Google Scholar

[14]Rudiger A, Schneller T, Roelofs A, Tiedke S, Schmitz T, Waser R, “Nanosize ferroelectric oxides – tracking down the superparaelectric limit”, Appl. Phys A, Vol. 80, No. 06, March 2005, pp. 1247-1255.10.1007/s00339-004-3167-z Search in Google Scholar

[15]Wu X, Wu D, Liu X, “Negative pressure effects in SrTiO₃ nanoparticles investigated by Raman spectroscopy”, Solid State Comm., Vol. 145, No. 5-6, February 2008, pp. 255-258.10.1016/j.ssc.2007.11.018 Search in Google Scholar

[16]H. Tagawa, K. Igarashi, “Reaction of Strontium Carbonate with Anatase and Rutile” J. Am. Ceram. Soc. Vol. 69, No. 04, April 1986, pp.310-314.10.1111/j.1151-2916.1986.tb04737.x Search in Google Scholar

[17]V.A. Trepakov, M.E. Savinov, I. Okhay, A. Tkach, P.M. Vilarinho, A.L. Kholkin, I. α_l_ Gregora, L. Jastrabik, “Dielectric permittivity and Cr³⁺ impurity ion probe luminescence in SrTiO₃ sol–gel ceramics”, J. Eur. Ceram. Soc. Vol. 27, No. 13-15, March 2007, pp. 3705-3707.10.1016/j.jeurceramsoc.2007.02.022 Search in Google Scholar

[18]G. Pfaff, “Sol–gel synthesis of strontium titanate powders of various compositions”, J. Mater. Chem. Vol.03, No. 07, July 1993, pp.721-724.10.1039/JM9930300721 Search in Google Scholar

[19]Q. Pang, J.X. Shi, M.L. Gong, “Photoluminescent Properties of SrTiO₃: Pr, Al Nanophosphors Synthesized by Microemulsion–Microwave Heating” J. Am. Ceram. Soc. Vol. 90, No. 12, December 2007, pp. 3943-3946.10.1111/j.1551-2916.2007.01988.x Search in Google Scholar

[20]P.K. Dutta, J.R. Gregg, “Hydrothermal synthesis of tetragonal barium titanate (BaTiO₃)” Chem. Mater. Vol. 04, No. 04, July 1992, pp. 843-846.10.1021/cm00022a019 Search in Google Scholar

[21]M.-H. Um, H. Kumazawa, “Hydrothermal synthesis of ferroelectric barium and strontium titanate extremely fine particles”, J. Mater. Sci. Vol. 35, No. 05, March 2000, pp. 1295-1300. Search in Google Scholar

[22]S.C. Zhang, J.X. Liu, Y.X. Han, B.C. Chen, X.G. Li, “Formation mechanisms of SrTiO₃ nanoparticles under hydrothermal conditions”, Mater. Sci. Eng. B, Vol. 110, No. 01, June 2004 pp. 11-17.10.1016/j.mseb.2004.01.017 Search in Google Scholar

[23]E.K. Nyutu, C.H. Chen, P.K. Dutta, S.L. Suib, “Effect of Microwave Frequency on Hydrothermal Synthesis of Nanocrystalline Tetragonal Barium Titanate” J. Phys. Chem. C, Vol. 112, No. 26, June 2008, pp. 9659-9667.10.1021/jp7112818 Search in Google Scholar

[24]E.R. Leite, C.M.G. Sousa, E. Longo, J.A. Varela, “Influence of polymerization on the synthesis of SrTiO₃: Part II. Particle and agglomerate morphologies”, Ceram. Int., Vol. 21, No. 3, 1995, pp. 153-158.10.1016/0272-8842(95)90904-W Search in Google Scholar

[25]S.M. Zanetti, E. Longo, J.A. Varela, E.R. Leite, “Microstructure and phase evolution of SrTiO₃ thin films on Si prepared by the use of polymeric precursors”, Mater. Lett, Vol. 31, No. 3-6, June 1997, pp. 173-178.10.1016/S0167-577X(96)00267-4 Search in Google Scholar

[26]C.H. Chang, Y.H. Shen, “Synthesis and characterization of chromium doped SrTiO₃ photocatalyst” Mater. Lett, Vol. 60, No. 01, January 2006, pp. 129-132.10.1016/j.matlet.2005.08.005 Search in Google Scholar

[27]H. Cui, M. Zayat, D. Levy, “Controlled homogeneity of the precursor gel in the synthesis of SrTiO₃ nanoparticles by an epoxide assisted sol–gel route” J. Non-Cryst. Solids, Vol. 353, No. 11-12, May 2007, pp. 1011-1016.10.1016/j.jnoncrysol.2007.01.009 Search in Google Scholar

[28]Yoshimura M, “Importance of soft solution processing for advanced inorganic materials”, J Mater Res, Vol.-13, No. 04,: April1998, pp.796-802.10.1557/JMR.1998.0101 Search in Google Scholar

[29]J. Kong, N. Franklin, C. Zhou, M. Chapline, S. Peng, K. Cho, H. Dai, Nanotube molecular wires as chemical sensors, Science Vol. 287, January 2000, pp. 622–625.10.1126/science.287.5453.622 Search in Google Scholar

[30]W. Gopel, K. Schierbaum, SnO2 sensors current status and future prospects, Sens. Actuators B, Vol. 26, No. 1-3, June 1995, pp. 1–12.10.1016/0925-4005(94)01546-T Search in Google Scholar

[31]Y. Yamada, Y. Seno, Y. Masuoka, K. Yamashita, Nitrogen oxides sensing characteristics of Zn2SnO4 thin film, Sens. Actuators B, Vol. 49, No.3, July 1998, pp. 248–252.10.1016/S0925-4005(98)00135-X Search in Google Scholar

[32]G. Korotcenkov, Gas response control through structural and chemical modification of metal oxide films: state of the art and approaches, Sens. Actuators B, Vol. 107, No. 01, May 2005, pp. 209–232.10.1016/j.snb.2004.10.006 Search in Google Scholar

[33]G. Otulakowski, B.P. Kavanagh, Hydrogen sulfide in lung injury: therapeutic hope from a toxic gas? Anesthesiology, Vol. 113, No. 1, July 2010, pp. 4–6.10.1097/ALN.0b013e3181dec00e20574223 Search in Google Scholar

[34]D. Vuong, G. Sakai, K. Shimanoe, N. Yamazoe, Hydrogen sulfide gas sensing properties of thin films derived from SnO2 sols different in grain size, Sens. Actuators B, Vol. 105, No. 2, March 2005, pp. 437–442.10.1016/j.snb.2004.06.034 Search in Google Scholar

[35]I. S. Hwang, J.K. Choi, S.J. Kim, K.Y. Dong, J.H. Kwon, B.K. Ju, J.H. Lee, Enhanced H₂S sensing characteristics of SnO2 nanowires functionalized with CuO, Sens. Actuators B, Vol. 142, No. 01, October 2009, pp. 105-110.10.1016/j.snb.2009.07.052 Search in Google Scholar

[36]J. Xu, X. Wang, J. Shen, Hydrothermal synthesis of In2O₃ for detecting H₂S in air, Sens. Actuators B, Vol. 115, No. 02, June 2006, pp. 642–646.10.1016/j.snb.2005.10.038 Search in Google Scholar

[37]G. H. Jain, V. B. Gaikwad and L. A. Patil, “Studies on gas sensing performance of (Ba0.8Sr0.2)(Sn0.8Ti0.2)O₃ thick film resistors”, Sensors and Actuators B, Vol. 122, No. 02, March 2007, pp. 605-612.10.1016/j.snb.2006.07.011 Search in Google Scholar

[38]G. H. Jain, V. B. Gaikwad, D. D. Kajale, R. M. Chaudhari, R. L. Patil, N. K. Pawar and L. A. Patil, “Gas Sensing Performance of pure and modified Barium Strontium Titanate Thick Film Resistors”, Sensors and Transducers, Vol. 90, 2008, pp. 160-173 Search in Google Scholar

[39]P. Balaya, J. Jamnik, J. Fleig, J. Maier, “Mesoscopic electrical conduction in nanocrystalline SrTiO₃”Appl. Phys. Lett. Vol. 88, No. 6, February 2006, article no. 062109 (3 pages).10.1063/1.2171798 Search in Google Scholar

[40]F.M. Pontes, E. Longo, E.R. Leite, E.J.H. Lee, J.A. Varela, P.S. Pizani, “Photoluminescence at room temperature in amorphous SrTiO₃ thin films obtained by chemical solution deposition”, Mater. Chem. Phys. Vol. 77, No. 02, January 2002, pp. 598–602.10.1016/S0254-0584(02)00112-8 Search in Google Scholar

[41]C.D. Pinheiro, E. Longo, E.R. Leite, F.M. Pontes, R.Magnani, J.A. Varela, The role of defect states in the creation of photoluminescence in SrTiO₃, Appl. Phys. A, Vol. 77, No. 1, 2003, pp. 81–85.10.1007/s00339-002-1916-4 Search in Google Scholar

[42]W.F. Zhang, Z. Yin, M.S. Zhang, Study of photoluminescence and electronic states in nanophase strontium titanate, Appl. Phys. A, Vol. 70, No. 01, 2000, pp. 93–96.10.1007/s003390050018 Search in Google Scholar

[43]Y.S. Kim, S.C. Ha, K. Kim, H. Yang, J.T. Park, C.H. Lee, J. Choi, J. Paek, K. Lee, Room temperature semiconductor gas sensor based on non-stoichiometric tungsten oxide nanorod film, Appl. Phys. Lett. Vol. 86, No. 21, May 2005, article no. 213105(3pages).10.1063/1.1929872 Search in Google Scholar

[44]N. Yamazoe, New approaches for improving semiconductor gas sensors, Sens. Actuators B, Vol. 5, 1991, pp.7–19.10.1016/0925-4005(91)80213-4 Search in Google Scholar

[45]Z. Gergintschew, H. Förster, J. Kositza, D. Schipanski, Two-dimensional numerical simulation of semiconductor gas sensors, Sens. Actuators B, Vol. 26, 1995, pp.170– 173.10.1016/0925-4005(94)01580-B Search in Google Scholar

[46]N. Yamazoe, G. Sakai, K. Shimanoe, Oxide semiconductor gas sensors, Catal. Surv. Asia Vol. 7 2003, pp. 63–75. Search in Google Scholar

[47]T. Gao, T.H. Wang, Synthesis and properties of multipod-shaped ZnO nanorods for gas sensor applications, Appl. Phys. A, Vol. 80, 2005, pp.1451–1454.10.1007/s00339-004-3075-2 Search in Google Scholar

[48]N. Yamazoe, J. Fuchigami, M. Kishikawa, T. Seiyama, Interactions of tin oxide surface with O₂, H₂O and H₂, Surf. Sci., Vol. 86, 1979, pp. 335–344.10.1016/0039-6028(79)90411-4 Search in Google Scholar

[49]M. Egashira, Y. Shimizu, Y. Takao, S. Sako, Variations in I–V characteristics of oxide semiconductors induced by oxidizing gases, Sens. Actuators B, Vol.35, 1996, pp.62–67.10.1016/S0925-4005(96)02015-1 Search in Google Scholar

[50]J.Q. Xu, X.H. Jia, X.D. Lou, J.N. Shen, One-step hydrothermal synthesis and gas sensing property of ZnSnO₃ microparticles, Solid State Electron. Vol. 50, No. 3, 2006, pp. 504–507.10.1016/j.sse.2006.02.001 Search in Google Scholar

[51]A. Rothschild and Y. Komen, “The effect of grain size on the sensitivity of nanocrystalline metal-oxide gas sensors” J. Appl. Phys. Vol. 95, No. 11, 2004, pp. 6374-6380.10.1063/1.1728314 Search in Google Scholar

[52]H. Windichamann and P. Mark, “A Model for the Operation of a Thin-Film SnOx Conductance-Modulation Carbon Monoxide Sensor”, J. Electrochem. Soc. Vol. 126, No. 4, 1979, pp.627-633.10.1149/1.2129098 Search in Google Scholar

[53]J Mizsei, How can sensitive and selective semiconductor gas sensors be made? Sensors and Actuators B, Vol. 23, No. 2-3, February 1995, pp. 173-17610.1016/0925-4005(94)01269-N Search in Google Scholar