<abstract xmlns="http://www.w3.org/1999/xhtml"><sec><h3>Introduction</h3><p>Orthodontic miniscrews are used to obtain skeletal anchorage during orthodontic treatment and their application is growing due to the simple method of placement and removal, which invites improved patient compliance without significant impact on function and aesthetics. However, complications and risks are reported that underscore the need for a thorough preoperative assessment to enable accurate placement, especially in confined sites. A novel approach is presented which employs a custom-designed 3D-printed splint to facilitate a fully-guided placement of orthodontic miniscrews.</p></sec><sec><h3>Materials and methods</h3><p>The presented splint was virtually planned using coDiagnostiX® software after matching the DICOM data and STL file, to enable fully-guided screw insertion. Insertion depth was defined by a sleeve tube height that provided a depth stop when contact was reached with the head of the hand piece. Additionally, to prevent movement of the insertion instrument, a custom metallic sleeve was designed and 3D-printed by a metallic printer.</p></sec><sec><h3>Results</h3><p>Accurate placement was achieved and no complications were experienced during insertion and use.</p></sec><sec><h3>Conclusions</h3><p>The insertion approach provides more predictable results and enables accurate placement of orthodontic screws. The procedure avoids associated risks and complications primarily encountered in difficult cases.</p></sec></abstract>

IntroductionOrthodontic miniscrews are used to obtain skeletal anchorage during orthodontic treatment and their application is growing due to the simple method of placement and removal, which invites improved patient compliance without significant impact on function and aesthetics. However, complications and risks are reported that underscore the need for a thorough preoperative assessment to enable accurate placement, especially in confined sites. A novel approach is presented which employs a custom-designed 3D-printed splint to facilitate a fully-guided placement of orthodontic miniscrews.Materials and methodsThe presented splint was virtually planned using coDiagnostiX® software after matching the DICOM data and STL file, to enable fully-guided screw insertion. Insertion depth was defined by a sleeve tube height that provided a depth stop when contact was reached with the head of the hand piece. Additionally, to prevent movement of the insertion instrument, a custom metallic sleeve was designed and 3D-printed by a metallic printer.ResultsAccurate placement was achieved and no complications were experienced during insertion and use.ConclusionsThe insertion approach provides more predictable results and enables accurate placement of orthodontic screws. The procedure avoids associated risks and complications primarily encountered in difficult cases.

Fully guided placement of orthodontic miniscrews— a technical report

Australasian Orthodontic Journal

This work is licensed under the Creative Commons Attribution 4.0 International License.

{"article-title":"Fully guided placement of orthodontic miniscrews\u2014 a technical report"}

IntroductionOrthodontic miniscrews are used to obtain skeletal anchorage during orthodontic treatment and their application is growing due to the simple method...

Fully guided placement of orthodontic miniscrews— a technical report

Pubblicato online: 20 lug 2021

Pagine: 71 - 74

Ricevuto: 01 ago 2018

Accettato: 01 mar 2019

DOI: https://doi.org/10.21307/aoj-2020-035

© 2019 Barbara Kirnbauer et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.