Application of Fibers from End-of-Life Tires as a Self-Compacting Concrete Reinforcement – An Experimental Study

[1] “End-of-life Tyre REPORT 2015” by European Tires and Rubber Manufacturers’Association, http://www.etrma.org/uploads/Modules/Documentsmanager/elt-report-v9a---final.pdf Search in Google Scholar

[2] Aiello M.A. Leuzzi F. Centonze G. Maffezzoli A. 2009 Use of steel fibres recovered from waste tyres as reinforcement in concrete: Pull-out behaviour, compressive and flexural strength. Waste Management 29, 1960–1970.10.1016/j.wasman.2008.12.002 Search in Google Scholar

[3] Centonze G. Leone M. Aiello A.M. 2012 Steel fibers from waste tires as reinforcement in concrete: A mechanical Characterization. Construction and Building Materials 36, 45–67. Search in Google Scholar

[4] Caggiano A. Xargay H. Folino P. Martinelli E. 2015 Experimental and numerical characterization of the bond behavior of steel fibers recovered from waste tires embedded in cementitious matrices. Cement & Concrete Composites 62, 146–155.10.1016/j.cemconcomp.2015.04.015 Search in Google Scholar

[5] Groli G. Caldentey A.P. Soto A.G. 2014 Cracking performance of SCC reinforced with recycled fibres – an experimental study. Structural Concrete 15 2 136–153.10.1002/suco.201300008 Search in Google Scholar

[6] Sengul O. 2016 Mechanical behavior of concretes containing waste steel fibers recovered from scrap tires. Construction and Building Materials 122, 649–658. Search in Google Scholar

[7] Bjegovic D. Baricevic A. Lakusic S. 2012 Mechanical properties of high strength concrete with recycled steel fibres from waste tyres. in Proc. of the 8th RILEM International Symposium on Fibre Reinforced Concrete: Challenges and Opportunities (BEFIB 2012), Guimarães, Portugal Search in Google Scholar

[8] Mastali M. Dalvand A. 2016 Use of silica fume and recycled steel fibers in self-compacting concrete (SCC). Construction and Building Materials 125, 196–209. Search in Google Scholar

[9] Naaman A. E. 2007 High performance fiber reinforced cement composites: classification and applications. CBM-CI international workshop Karachi, Pakistan, 389–401. Search in Google Scholar

[10] Pająk M. Ponikiewski T. 2015 The laboratory investigation on the influence of the polypropylene fibers on selected mechanical properties of hardened self-compacting concrete. Architecture Civil Engineering Environment 8 3 69–78. Search in Google Scholar

[11] Brandt A. M. 2008 Fibre reinforced cement-based (FRC) composites after over 40 years of development in building and civil engineering. Composite Structures 86, 3–9. Search in Google Scholar

[12] Huss M. Tue N.V. 2017 Innovative steel fibers and their effect on fiber distribution in beams – experimental investigations. Architecture Civil Engineering Environment 10 3 103–108.10.21307/acee-2017-040 Search in Google Scholar

[13] Sucharda O. Bilek V. Smirakova M. Kubosek J. Cajka R. 2017 Comparative Evaluation of Mechanical Properties of Fibre-Reinforced Concrete and Approach to Modelling of Bearing Capacity Ground Slab. Periodica Polytechnica Civil Engineering 61, 972–986.10.3311/PPci.10688 Search in Google Scholar

[14] Naaman A. E. 2003 Engineered steel fibers with optimal properties for reinforcement of cement composites. Journal of Advanced Concrete Technology 3, 241–252. Search in Google Scholar

[15] Yoo D.Y. Kim S.W. Park J. J. 2017 Comparative flexural behavior of ultra-high-performance concrete reinforced with hybrid straight steel fibers. Construction and Building Materials 132, 219–229. Search in Google Scholar

[16] Pająk M. Ponikiewski T. 2017 Experimental investigation on hybrid steel fibers reinforced self-compacting concrete under flexure. Procedia Engineering 193, 218–225. Search in Google Scholar

[17] Smarzewski P. Barnat-Hunek D. 2017 Property Assessment of Hybrid Fiber-Reinforced Ultra-High-Performance Concrete. International Journal of Civil Engineering https://doi.org/10.1007/s40999-017-0145-3.10.1007/s40999-017-0145-3 Search in Google Scholar

[18] Pająk M. 2016 The investigation on flexural properties of hybrid fiber reinforced self-compacting concrete. Procedia Engineering 161, 121–126. Search in Google Scholar

[19] Katzer J. Domski J. 2012 Quality and mechanical properties of engineered steel fibres used as reinforcement for concrete. Construction and Building Materials 34, 243–248. Search in Google Scholar

[20] Alberti M.G. Enfedaque A. Gálvez J.C. 2017 On the prediction of the orientation factor and fibre distribution of steel and macro-synthetic fibres for fibre-reinforced concrete. Cement and Concrete Composites 77, 29–48. Search in Google Scholar

[21] Cao Q. Cheng Y. Cao M. Gao M. 2017 Workability, strength and shrinkage of fiber reinforced expansive self-consolidating concrete. Construction and Building Materials 131, 178–185. Search in Google Scholar

[22] Banthia N. Sappakittipakorn M. 2007 Toughness enhancement in steel fiber reinforced concrete through fiber hybridization. Cement Concrete Research 37, 1366–1372. Search in Google Scholar

[23] Yoo D.Y. Kim S. Park G.J. Park J.J. Kim S.W. 2017 Effects of fiber shape, aspect ratio, and volume fraction on flexural behavior of ultra-high-performance fiber-reinforced cement composites. Composite Structures 174, 375–388.10.1016/j.compstruct.2017.04.069 Search in Google Scholar

[24] Szwabowski J. Gołaszewski J. 2010 Cement paste properties and paste aggregate void saturation ratio as the factors governing the self-compactness and compressive strength of concrete. Cement Wapno Beton XVII/LXXVII 2 97–107. Search in Google Scholar

[25] PN-EN 12390-3 Testing hardened concrete - Part 3: Compressive strength of test specimens. Search in Google Scholar

[26] ASTM C1609/C1609M – 12 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading). Search in Google Scholar

[27] Japan Society of Civil Engineers 1984 Method of Test for Flexural Strength and Flexural Toughness of Fiber Reinforced Concrete. Standard SF-4, 58–66. Search in Google Scholar

[28] Glinicki M.A. 2010 Materiały XXV Ogólnopolskiej Konferencji “Warsztaty Pracy Projektanta Konstrukcji” (Proceedings of the XXV Polish National Conference “Workshops of the Structural Designer Work”), Szczyrk 2010, 279–308. Search in Google Scholar