This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Abramczyk J. (2011). Wpływ kształtu płaskich arkuszy i konstrukcji podpierających zakrzywione przekrycia z blach fałdowych na ich postać geome- tryczną (An influence of shapes of flat folded sheets and their directrices on the forms of the building covers made up of these sheets). Rzeszów, Doctoral thesis, (In Polish).Search in Google Scholar
Abramczyk J. (2017). Free Forms of Buildings Roofed with Corrugated Sheeting Transformed Effectively into Shell Shapes. Monograph, Publishing House of Rzeszow University of Technology.Search in Google Scholar
Abramczyk J. (2015). Building shells made up of bent and twisted flat folded sheets. Advances and Trends in Engineering Sciences and Technologies, Proceedings of the International Conference on Engineering Sciences and Technologies, 27-29 May 2015, Tatranska Strba, High Tatras Mountains – Slovak Republic, CRC Press, Mohamad Al Ali and Peter Platko. DOI: 10.1201/b19249-4210.1201/b19249-42Search in Google Scholar
Reichhart A. (2002). Kształtowanie geometryczne i konstrukcyjne powłok z blach fałdowych (Geometrical and structural shaping building shells made up of folded sheets). Rzeszów: Publishing House of Rzeszow University of Technology, (In Polish).Search in Google Scholar
Carmo M. P. (1976). Differential geometry of curves and surfaces. Prentice-Hall, Inc., Englewood Cliffs, New Jersey.Search in Google Scholar
Grey, A. (1999). Modern differential geometry of curves and surfaces with Mathematica. CRC Press LCC, Florida.Search in Google Scholar
Abramczyk J. (2013). Specificity of shaping light gauge steel shells. Proc. II Intern. Conf. Structures and Architecture, New concepts, applications and challenges, Guimaraes, Portugal, 1443–1450. DOI: 10.1201/b15267-20110.1201/b15267-201Search in Google Scholar
Abramczyk J. (2012). Multi-segment shell structures. Lightweight Structures in Civil Engineering, Proc. XVIII Intern. Sem. of IASS Polish Chapter, MICRO- PUBLISHER-C-P Jan B. Obrebski, Warszawa, 38–47.Search in Google Scholar
Abramczyk J. (2016). Shaping Innovative Forms of Buildings Roofed with Corrugated Hyperbolic Paraboloid Sheeting. Procedia Engineering. DOI: 10.1016/j.proeng.2016.08.49810.1016/j.proeng.2016.08.498Search in Google Scholar
Reichhart A. (2004). Principles of designing shells of profiled steel sheets. Local Seminar of IASS Polish Chapter, Warsaw – Czestochowa, 3 Dec. 2004, 200–205.Search in Google Scholar
Abramczyk J. (2014). Principles of geometrical shaping effective shell structures forms. JCEEA z. 61, Rzeszow, XXXI(1/2014), 5–21. DOI:10.7862/rb.2014.110.7862/rb.2014.1Search in Google Scholar
Reichhart A. (1995); Corrugated Deformed Steel Sheets as Material for Shells. Proc. International Conference on Lightweight Structures in Civil Engineering, Vol. I, Warsaw.Search in Google Scholar
Abramczyk J. (2012); Free forms of light gauge steel shell structures. Proc. XVIII Intern. Sem. of IASS Polish Chapter, MICRO-PUBLISHER-C-P Jan B. Obrebski, Warszawa, 48–53.Search in Google Scholar
Gergely P., Banavalkar, P. V., Parker, J. E. (1971); The analysis and behavior of thin-steel hyperbolic paraboloid shells. A Research Project Sponsored by the America Iron and Steel Institute, Report No. 338, September 1971. New York: Ithaca.Search in Google Scholar
Gioncu V., Petcu D. (1995); Corrugated hypar structures. Proc. Intern. Conf. IASS / LSCE, Warsaw: MICRO-PUBLISHER-C-P Jan B. Obrebski, 637–644.Search in Google Scholar
Davis, J. M., Bryan, E. R. (1982); Manual of stressed skin diaphragm design. London: Granada.Search in Google Scholar
Abramczyk J. (2016); Integrated building forms covered with effectively transformed folded sheets. Journal of the International Association for Shell and Spatial Structures, Spain, 57(2), 121–132. DOI: http//dx.doi.org/10.20898/j.iass.2016.188.71710.20898/j.iass.2016.188.717Search in Google Scholar
Prokopska A., Abramczyk J., Śnieżek A. (2015); Consistent architectural forms of buildings determined by free forms of their shell roof. Lightweight Structures in Civil Engineering; Proc. XXI Intern. Sem. of IASS Polish Chapter, Z. Bieniek & R. Tarczewski, Rzeszow, 71–77.Search in Google Scholar
Prokopska A., Abramczyk J., Gotkowska E. (2015); Architectural systems of buildings defined morphologically by their shell roof forms. Lightweight Structures in Civil Engineering; Proc. XXI Intern. Sem. of IASS Polish Chapter, Z. Bieniek & R. Tarczewski, Rzeszow, 15–21.Search in Google Scholar
Prokopska A., Abramczyk J. (2017); Innovative systems of corrugated shells rationalizing the design and erection processes for free building forms. Architecture Civil Engineering Environment, 1(10), 29–40.10.21307/acee-2017-004Search in Google Scholar
Prokopska A. (2002); Morphology of the Architectural Achievement. A Methodological Analysis of Selected Morphological Systems of the Natural and Architectural Environments. 7(1-2), Journal of Transdisciplinary Systems Science, Affiliation of the International Federation of Systems Research, Official Journal of Polish Systems Society, Editorial Office: Publishing House of Wroclaw University of Technology, Copyright by Polish Systems Society, 3–113.Search in Google Scholar
Dźwierzyńska J., Abramczyk J. (2015); Engineering Descriptive Geometry. Politechnika Rzeszowska, Rzeszów.Search in Google Scholar
Reichhart A. (2000). Specificity of shells made of elastic deformed profiled metal sheets. Proc. of the 4th Int. Colloq. on Structural Morphology, Delft, 138–145.Search in Google Scholar
Obrębski J. B. (2004). Observations on Rational Designing of Space Structures. IASS 2004 Symposium Montpellier Shell and Spatial Structures for Models to Realization, September, Montpellier, France, 24–25.Search in Google Scholar
Rębielak J. (2012); Review of Some Systems Developed Resently by help of Application of Numerical Models. Lightweight Structures in Civil Engineering; Proc. XVIII Intern. Sem. of IASS Polish Chapter, Lódź, MICRO-PUBLISHER-C-P Jan B. Obrębski, 59–64.Search in Google Scholar